Buchumschlag

Account for pore formation in estimation of limiting state in the zone of pressure vessel wall thinning defect

Gespeichert in:

Bibliographische Detailangaben
Datum:	2012
Hauptverfasser:	V. I. Makhnenko, E. A. Velikoivanenko, G. F. Rozynka, N. I. Pivtorak
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2012
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000464241
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Improvement of method of assessment of risk of fracture in the zone of wall thinning in main pipelines
von: V. I. Makhnenko, et al.
Veröffentlicht: (2010)

Probabilistic estimate of the condition of pipeline elements with detected thinning defects
von: E. A. Velikoivanenko, et al.
Veröffentlicht: (2014)

Account for pore formation in heat treatment of welded elements of steels, prone to initiation of temper cracks
von: V. I. Makhnenko, et al.
Veröffentlicht: (2013)

Risk of fracture of main pipeline with defects of wall thinning in repair under pressure
von: V. I. Makhnenko, et al.
Veröffentlicht: (2010)

Static strength of thin-walled vessel with dents under internal pressure
von: Кантор, Б. Я., et al.
Veröffentlicht: (2016)

Static strength of thin-walled vessel with dents under internal pressure
von: Кантор, Б. Я., et al.
Veröffentlicht: (2016)

Static strength of thin-walled vessel with dents under internal pressure
von: Ja. Kantor, et al.
Veröffentlicht: (2011)

Mutual influence of defects in welded joint zone at different force loading
von: V. I. Makhnenko, et al.
Veröffentlicht: (2012)

Evaluation of serviceability of main pipeline with a local thinning of wall in arc surfacing repair
von: E. A. Velikoivanenko, et al.
Veröffentlicht: (2015)

Load-carrying capacity of vessel shells with local wall thinning
von: V. M. Dolinskij, et al.
Veröffentlicht: (2009)

Risk of failure during thinning of wall of main pipeline in the area of circumferential welded joints at the presence of bending moments along the axis of pipeline
von: V. I. Makhnenko, et al.
Veröffentlicht: (2012)

Modeling of processes of initiation and development of pores of tough fracture in welded structures
von: E. A. Velikoivanenko, et al.
Veröffentlicht: (2013)

Problem solution of noninvasive measuring of blood stream pressure on vessels walls
von: A. D. Bekh, et al.
Veröffentlicht: (2013)

The Bauschinger effect in open-end thick-walled cylindrical pressure vessels
von: V. N. Bastun, et al.
Veröffentlicht: (2017)

Reinforcement of an NPP pipeline with a wall thinning defect by applying external weld ovelay
von: G. V. Vorona, et al.
Veröffentlicht: (2024)

Different approaches to estimation of reactor pressure vessel material embrittlement
von: V. M. Revka, et al.
Veröffentlicht: (2013)

Modeling the possibility of propagation of cracklike defects in pressure vessels from two-layer steels
von: I. I. Perepichai, et al.
Veröffentlicht: (2018)

An Algorithm for Estimating Minimum Strength of Thin-Walled Structures to Resist Elastic Buckling under Pressure
von: Ishinabe, M., et al.
Veröffentlicht: (2012)

Study of Composite Fiber Reinforcement of Cracked Thin-Walled Pressure Vessels Utilizing Multi-Scaling Technique Based on Extended Finite Element Method
von: Mirmohammad, S.H., et al.
Veröffentlicht: (2018)

Numerical prediction of effectiveness of reinforcement of defective pipelines by composite material bands
von: E. A. Velikoivanenko, et al.
Veröffentlicht: (2016)

Modeling a circumferential crack in pipe area of a flat bottom of thick-walled pressure vessel
von: V. V. Kyrychok, et al.
Veröffentlicht: (2019)

Permissible pressure for filler of sealed sleeves used to repair main pipelines
von: V. I. Makhnenko, et al.
Veröffentlicht: (2011)

Prediction of residual strength of pipeline elements with detected corrosion defects based on Monte-Carlo method
von: A. S. Milenin, et al.
Veröffentlicht: (2019)

Methodology of numerical prediction of serviceability of pipeline elements with corrosion-erosion defects under conditions of high-temperature operation
von: A. S. Milenin, et al.
Veröffentlicht: (2017)

Evaluation of the state and prediction of breaking load at acoustic-emission testing of pressure vessels with limited access to controlled surface
von: S. A. Nedosieka, et al.
Veröffentlicht: (2020)

Testing of pressure vessels by an international expert team
von: Ja. Nedoseka, et al.
Veröffentlicht: (2016)

Analysis of conditions of initiation and propagation of corrosion cracks in the zone of circumferential joints of main gas pipelines
von: V. I. Makhnenko, et al.
Veröffentlicht: (2009)

Determination of contact pressure of reinforcing coupling in repair of pipelines with surface defects
von: V. I. Makhnenko, et al.
Veröffentlicht: (2013)

Adsorption of chain molecules in pores with crystalline walls: a density functional approach
von: Bucior, K., et al.
Veröffentlicht: (2009)

Estimation of the error of functionals calculation results of the neutron flux onto the WWER 1000 reactor pressure vessel
von: V. L. Demekhin, et al.
Veröffentlicht: (2013)

Estimation of the error of functionals calculation results of the neutron flux onto the WWER 1000 reactor pressure vessel
von: V. L. Demekhin, et al.
Veröffentlicht: (2012)

Selective detection of defects in thin-walled items from austenitic steels by put-on eddy current transducer
von: V. M. Uchanin
Veröffentlicht: (2015)

Discretization of Thin-Walled Sections with Variable Wall Thickness
von: Гребенніков, М. М., et al.
Veröffentlicht: (2025)

Discretization of Thin-Walled Sections with Variable Wall Thickness
von: Гребенніков, М. М., et al.
Veröffentlicht: (2025)

Creep Failure Time of Thin-Walled Pipes under Combined Internal Pressure, Bending, and Tension
von: El Megharbel, A.
Veröffentlicht: (2010)

Comparison of Маster curve with normative method of estimating WWER-1000 reactor pressure vessel metal fracture toughness
von: V. M. Revka, et al.
Veröffentlicht: (2024)

High-performance methods for analyzing the statistical strength of welded pipelines and pressure vessels using the Monte–Carlo method
von: E. A. Velikoivanenko, et al.
Veröffentlicht: (2020)

High-pressure reorganization of the fractal pore structure in detonation nanodiamond powders
von: L. A. Bulavin, et al.
Veröffentlicht: (2021)

High-pressure reorganization of the fractal pore structure in detonation nanodiamond powders
von: L. A. Bulavin, et al.
Veröffentlicht: (2021)

Estimation of the periods of creep-fatigue crack initiation and growth in thin-walled structural elements
von: Ye. Andreikiv, et al.
Veröffentlicht: (2011)