Buchumschlag

Welded structures of austenite steel of 10Kh18N10T type under conditions of radiation-induced swelling

Gespeichert in:

Bibliographische Detailangaben
Datum:	2012
Hauptverfasser:	V. I. Makhnenko, O. V. Makhnenko, S. S. Kozlitina, L. I. Dzjubak
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2012
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000464821
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Swelling prediction of AISI 304 and 18Cr10NiTi austenitic stainless steels using various empirical functions
von: Kalchenko, A.S., et al.
Veröffentlicht: (2022)

Investigation of stress-strain state of welded structures of austenite steel under the conditions of radiation
von: O. V. Makhnenko, et al.
Veröffentlicht: (2013)

Prediction of σ-phase content in HAZ of butt joints of duplex steels in arc welding
von: V. I. Makhnenko, et al.
Veröffentlicht: (2011)

The microstructure of austenitic 18Kh18N10T steel mechanically alloyed with of Y2O3–ZrO2 nano-oxides
von: S. V. Starostenko, et al.
Veröffentlicht: (2015)

Laser welding of thin-wall filter elements of steel 08Kh18N10T
von: V. D. Sheljagin, et al.
Veröffentlicht: (2017)

Investigation of deformational impact on 08Kh18N9 and 12Kh18N10T steels in welded vessels and pipes
von: L. M. Lobanov, et al.
Veröffentlicht: (2015)

Structure and properties of austenitic ODS steel 08Cr18Ni10Ti
von: Velikodnyi, A.N., et al.
Veröffentlicht: (2014)

Electroslag processing of Kh18N10T stainless steel shavings
von: O. V. Veretilnyk, et al.
Veröffentlicht: (2024)

Welds formation in electron beam welding of heat resistant steels of grades 10Kh9MFBA and 10Kh12M
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2013)

The influence of water environment on weld metal gas saturation in underwater welding of 12Kh18N10T steel
von: Yu. Kakhovskyi
Veröffentlicht: (2015)

Diffusion vacuum welding of intemetallic alloy γ-TiAl with steel 12Kh18N10T
von: G. K. Kharchenko, et al.
Veröffentlicht: (2012)

Hazard of formation of carbides and σ-phase in welding of high-alloy chromiumnickel steels
von: V. I. Makhnenko, et al.
Veröffentlicht: (2010)

Evaluation of stressstrain state of dissimilar welded joints of steels 10Kh13G18D+09G2S
von: A. I. Gedrovich, et al.
Veröffentlicht: (2010)

Effect of argon-ion irradiation on cavity formation and evolution in 18Cr10NiTi austenitic steel
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2020)

Influence of different types of hydrogen treatment on hydrogen retention and release from 12Kh18N10T steel
von: Bondarenko, M.N., et al.
Veröffentlicht: (2018)

Modeling of residual welding stresses, radiation swelling and stressed state of enclosure of the reactor VVER-1000 in the process of operation
von: O. V. Makhnenko, et al.
Veröffentlicht: (2016)

Influence of environmental conditions on microstructure development and swelling in irradiated austenitic stainless steels
von: Voyevodin, V.N., et al.
Veröffentlicht: (2005)

Mechanical properties of joints of heat-resistant steels of 10Kh12M, 10Kh9MFBA grades made by electron beam welding
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2013)

Influence of 12Kh18N10T steel fibers beam pressing on their structures and properties
von: V. A. Zorin, et al.
Veröffentlicht: (2014)

Effect of argon-ion irradiation on cavity formation in 18Cr10NiTi austenitic steel and its strengthened version
von: Kolodiy, I.V., et al.
Veröffentlicht: (2020)

The influence of the external polarization potential on tribo-corrosion behavior of 08Kh18N10T steel
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2018)

NPP`s welding repair works using technology of mechanized underwater welding of corrosion-resistant steel type of high 18-10
von: Ju. Kakhovskij, et al.
Veröffentlicht: (2014)

Corrosion-fatigue strength of T-joints of steel 12Kh18N10T and methods of its improvement
von: E. V. Kolomijtsev
Veröffentlicht: (2012)

Growth of corrosion cracks in structural steel 10GN2MFA
von: V. I. Makhnenko, et al.
Veröffentlicht: (2012)

Modeling of structural and stress-strain state of dissimilar steel ingot in electroslag melting
von: V. I. Makhnenko, et al.
Veröffentlicht: (2014)

Titanium-aluminide coatings on steel 12Kh18N10T with a barrier layer of titanium nitride
von: M. V. Arshuk, et al.
Veröffentlicht: (2011)

Automatic submerged arc welding of bridge spans of high-quality steels 10KhSNDA and 15KhSNDA in field
von: D. P. Cheprasov, et al.
Veröffentlicht: (2018)

Improving the methods for estimating radiation swelling and progressive dimensional changes of the elements of VVER¬1000 internals
von: O. V. Makhnenko, et al.
Veröffentlicht: (2019)

The influence of feed-water parameters of WMR-1000 reactors on corrosion-electrochemical behavior of 08Kh18N10T steel
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2014)

Radiation induced demagnetization of permanent magnets under 10 MeV electron beam
von: Bovda, V.А., et al.
Veröffentlicht: (2019)

Heat resistance steel titanoalitirovannoy 12X18H10T
von: M. V. Arshuk, et al.
Veröffentlicht: (2012)

Effect of cooling cycle of welding on structurephase composition of 15Kh2NMFA steel
von: O. V. Makhnenko, et al.
Veröffentlicht: (2019)

Improvement of the technology of producing extended composite transition pieces of Steel 20 - Steel 08KH18N10T made by the method of hot screw rolling in vacuum
von: B. V. Borts, et al.
Veröffentlicht: (2017)

Peculiarities of laser welding of austenite and austenite-ferrite stainless steels with high manganese content
von: V. Kirots, et al.
Veröffentlicht: (2012)

Investigation of acoustic emission characteristics of 12Kh18N10T steel at the temperature of 560° C. Information 2. Damageability and fracture prediction
von: Ja. Nedoseka, et al.
Veröffentlicht: (2014)

Non-metallic inclusions in 08Kh18N10T steel as a cause of defects in the heat exchange tubes of NPP steam generators
von: V. M. Voievodin, et al.
Veröffentlicht: (2019)

On the practical application of the 18Cr10NiTi steel after barocryodeformation
von: P. A. Khajmovich
Veröffentlicht: (2016)

Investigation of acoustic-emission characteristics of steel 12Kh18N10T at the temperature of 560 oC. Information 1. Methods and some results
von: Ja. Nedoseka, et al.
Veröffentlicht: (2011)

Physicomechanical properties of 12Kh21N5T and 08Kh18N10T steels irradiated by a high-current tubular relativistic electron beam in ablation mode
von: V. V. Belozerov, et al.
Veröffentlicht: (2011)

Method of solid-state welding of austenitic and oxide dispersion strengthened steels
von: B. V. Borts, et al.
Veröffentlicht: (2017)