Buchumschlag

Investigation of properties of coal-plastic honeycomb structures for lightweight aerospace applications

Gespeichert in:

Bibliographische Detailangaben
Datum:	2012
Hauptverfasser:	A. V. Degtjarev, A. M. Potapov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2012
Schriftenreihe:	Technical diagnostics and non-destructive testing
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000468639
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Analysis and identification of cast lightweight metal structures using minimal surfaces theory
von: V. S. Doroshenko
Veröffentlicht: (2015)

Topology optimization and lightweight design of engine hood material for SUV
von: Tang Youming, et al.
Veröffentlicht: (2016)

Innovative Design and Equivalent Mechanical Properties of a New Combined Honeycomb Structure
von: X. Li, et al.
Veröffentlicht: (2022)

Optimization of the procedure of thermal flaw detection of honeycomb structures
von: V. A. Storozhenko, et al.
Veröffentlicht: (2013)

The structure of the research and technological development by regulating the cooling rate of casting and the transition to the construction of lightweight castings
von: V. S. Doroshenko
Veröffentlicht: (2016)

A lightweight Symmetric Block Cipher &quot;Cypress&quot; – Description and the Main Properties
von: Yu. Rodinko
Veröffentlicht: (2017)

Investigation of heat treatment effect on the strength of Al–Ti bimetal honeycomb core
von: Yu. V. Falchenko, et al.
Veröffentlicht: (2021)

Simulation of the Lightweight Ceramic/Aluminum Alloy Composite Armor for Optimizing Component Thickness Ratios
von: Chang, Z.-L., et al.
Veröffentlicht: (2019)

Mobile honeycomb communication and perspective of its development
von: V. N. Evstafev, et al.
Veröffentlicht: (2017)

Fourier multipliers in the spaces with partial H¨older property and their application to the Schauder estimates
von: S. P. Degtjarev
Veröffentlicht: (2014)

Application of plastic deformation to improve the mechanical properties of resistance welding machines
von: O. A. Davydenko, et al.
Veröffentlicht: (2021)

Analytical Calculation of the Mechanical Properties of Honeycombs Printed Using the FDM Additive Manufacturing Technology
von: K. V. Avramov, et al.
Veröffentlicht: (2021)

Experimental and Numerical Analysis of the Shear Properties of Honeycomb Cores Produced Using Additive Technologies
von: I. I. Derevianko, et al.
Veröffentlicht: (2021)

Stress-strain State of Three-layer Cylindrical Shells with Reinforced Lightweight Filler under Nonstationary Loading
von: P. Z. Luhovyi, et al.
Veröffentlicht: (2021)

Analytical Calculation of the Mechanical Properties of Honeycombs Printed Using the FDM Additive Manufacturing Technology
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)

Experimental and Numerical Analysis of the Shear Properties of Honeycomb Cores Produced Using Additive Technologies
von: Деревянко, И. И., et al.
Veröffentlicht: (2022)

Analytical Calculation of the Mechanical Properties of Honeycombs Printed Using the FDM Additive Manufacturing Technology
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)

Experimental and Numerical Analysis of the Shear Properties of Honeycomb Cores Produced Using Additive Technologies
von: Деревянко, И. И., et al.
Veröffentlicht: (2022)

Technology and equipment for electron beam welding of structures for aerospace industry
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2016)

Development and potential application of sputtered syntactic foam plastic materials as the heat-protective materials in space rocket technologies
von: A. M. Potapov, et al.
Veröffentlicht: (2016)

Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: K. A. Avramov, et al.
Veröffentlicht: (2022)

Economic optimization of the methods of welding the structures of fuel tanks for aerospace engineering
von: L. M. Lobanov, et al.
Veröffentlicht: (2022)

The Aerospace Industry in Post-Industrial Development
von: N. M. Hrushchynska, et al.
Veröffentlicht: (2024)

Investigation of the scintillation properties of plastic scintillator based on 2,5-diaryloxadiazole alkyl derivative
von: Zhmurin, P.N., et al.
Veröffentlicht: (2019)

Evaluation of thermal resistance of three-layer honeycomb panel produced of alloy YuIPM-1200 by the method of vacuum diffusion welding
von: I. A. Gusarova, et al.
Veröffentlicht: (2016)

Structure and mechanical properties of iron after severe plastic deformation
von: O. I. Yurkova, et al.
Veröffentlicht: (2011)

Application of a layered composite material based on aluminium and titanium alloys to produce welded three-layer honeycomb panels
von: L. V. Petrushynets, et al.
Veröffentlicht: (2022)

Study on Thermal Stress of Honeycomb Ceramic Regenerators with Different Parameters
von: Y. X. Wang, et al.
Veröffentlicht: (2014)

Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2022)

Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2022)

Absorption–desorption of carbon dioxide in carbon honeycombs at elevated temperatures
von: N. V. Krainyukova, et al.
Veröffentlicht: (2019)

Properties of the two-dimensional spin-1/2 Heisenberg model on a honeycomb lattice with interlayer coupling
von: Löw, U.
Veröffentlicht: (2009)

Satellite monitoring problems in the aerospace complex
von: S. I. Alpert
Veröffentlicht: (2020)

Satellite monitoring problems in the aerospace complex
von: Alpert, Sofiia
Veröffentlicht: (2020)

Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: B. V. Uspenskyi, et al.
Veröffentlicht: (2022)

Oleosynthesis, colloidal structure and properties of thixotropic overbased plastic systems
von: L. V. Zheleznyi, et al.
Veröffentlicht: (2014)

Impact of sedimentation conditions on the coal structure and properties
von: K. A. Bezruchko, et al.
Veröffentlicht: (2022)

Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: Успенський, Б. В., et al.
Veröffentlicht: (2022)

Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: Успенський, Б. В., et al.
Veröffentlicht: (2022)

Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)