Local Melting of Coarse-Grained Al—4 wt.% Ge Alloy as a Cause for Superplasticity Appearance
Gespeichert in:
| Datum: | 2012 |
|---|---|
| Hauptverfasser: | V. V. Brjukhovetskij, V. P. Pojda, A. V. Pojda, Ju. V. Kolomak, R. I. Kuznetsova, N. N. Zhukov, K. A. Makhmud |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2012
|
| Schriftenreihe: | Metallophysics and advanced technologies |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000470874 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Features of the grain-boundary sliding development under conditions of superplasticity in an alloy with bimodal structure
von: A. V. Pojda, et al.
Veröffentlicht: (2016)
von: A. V. Pojda, et al.
Veröffentlicht: (2016)
Structural and Phase Relaxation in Superplastic Eutectic Alloy Sn—38% wt. Pb
von: V. F. Korshak, et al.
Veröffentlicht: (2015)
von: V. F. Korshak, et al.
Veröffentlicht: (2015)
Melting behavior and heat Treatment of al-mg-si-mn casting alloy alloyed with 0,1 wt.%Ti and 0,1 wt.%zr
von: V. V. Bojko, et al.
Veröffentlicht: (2014)
von: V. V. Bojko, et al.
Veröffentlicht: (2014)
Superplastic deformation of the AK4-1 alloy with a surface layer melted by electron pulse beam
von: Bryukhovetsky, V.V., et al.
Veröffentlicht: (2019)
von: Bryukhovetsky, V.V., et al.
Veröffentlicht: (2019)
Production of coarse-grained high-strength microgrits to be used in drilling tools
von: O. A. Zanevskij, et al.
Veröffentlicht: (2015)
von: O. A. Zanevskij, et al.
Veröffentlicht: (2015)
Anisotropic phase transformation mechanism on coarse-grained and fine-grained pure titanium at low-temperature plasma nitriding
von: J. M. Windajanti, et al.
Veröffentlicht: (2022)
von: J. M. Windajanti, et al.
Veröffentlicht: (2022)
Microstructure and properties of porous skeletal composites on based of the ultra-coarse-grained tungsten carbide with metal coating
von: I. V. Andreiev, et al.
Veröffentlicht: (2022)
von: I. V. Andreiev, et al.
Veröffentlicht: (2022)
Normal functors in the coarse category
von: Frider, V.
Veröffentlicht: (2018)
von: Frider, V.
Veröffentlicht: (2018)
Normal functors in the coarse category
von: Frider, V.
Veröffentlicht: (2005)
von: Frider, V.
Veröffentlicht: (2005)
Coarse selectors of groups
von: Protasov, I.
Veröffentlicht: (2023)
von: Protasov, I.
Veröffentlicht: (2023)
On Applicability of the Taking into Account the Third Invariant of Stress Deviator Constitutive Equations to Description of Nonlinear Deformation of Coarse-Grained Metal
von: M. E. Babeshko, et al.
Veröffentlicht: (2015)
von: M. E. Babeshko, et al.
Veröffentlicht: (2015)
The Composition of the Crushing and Sorting Plants Coarse-Grained Product of the Kryvyi Rih Basin as the Secondary Iron Ore Raw Material
von: O. S. Demchenko, et al.
Veröffentlicht: (2017)
von: O. S. Demchenko, et al.
Veröffentlicht: (2017)
Selectors and orderings of coarse spaces
von: I. Protasov
Veröffentlicht: (2021)
von: I. Protasov
Veröffentlicht: (2021)
Linearly ordered coarse spaces
von: I. Protasov
Veröffentlicht: (2022)
von: I. Protasov
Veröffentlicht: (2022)
Study of characteristics of Al + 5 wt.% TiO₂ + 6 wt.% Gr hybrid p/m composite powders prepared by ball milling process
von: Ravichandran, M., et al.
Veröffentlicht: (2015)
von: Ravichandran, M., et al.
Veröffentlicht: (2015)
Features of the rolling-off of hollow shafts of gas turbine engines under conditions of superplasticity
von: F. Z. Utjashev, et al.
Veröffentlicht: (2015)
von: F. Z. Utjashev, et al.
Veröffentlicht: (2015)
Equivariant Coarse (Co-)Homology Theories
von: Wulff, Christopher
Veröffentlicht: (2022)
von: Wulff, Christopher
Veröffentlicht: (2022)
Coarse structures on groups defined by conjugations
von: Protasov, I., et al.
Veröffentlicht: (2021)
von: Protasov, I., et al.
Veröffentlicht: (2021)
Study of characteristics of Al + 5 wt.% TiO2 + 6 wt.% Gr hybrid p/m composite powders prepared by ball milling process
von: M. Ravichandran, et al.
Veröffentlicht: (2015)
von: M. Ravichandran, et al.
Veröffentlicht: (2015)
Melting and crystallization in layered film system Ge-Bi
von: S. I. Bogatyrenko, et al.
Veröffentlicht: (2004)
von: S. I. Bogatyrenko, et al.
Veröffentlicht: (2004)
Experimental study and comparable analysis of plasticity of the Ni–18.75 at.% Fe alloy in coarse grained and nanocrystalline states in the temperature range 4.2–350 K
von: E. D. Tabachnikova, et al.
Veröffentlicht: (2014)
von: E. D. Tabachnikova, et al.
Veröffentlicht: (2014)
Substantiation of restorative and reconstructive-restorative operations on the large intestine
von: A. I. Pojda, et al.
Veröffentlicht: (2013)
von: A. I. Pojda, et al.
Veröffentlicht: (2013)
Investigation of the causes for appearance of defects in welded butt joints of tram rails made by thermit welding
von: E. Turyk, et al.
Veröffentlicht: (2021)
von: E. Turyk, et al.
Veröffentlicht: (2021)
Probability measure monad in the category of non-archimedean coarse spaces
von: V. L. Brydun, et al.
Veröffentlicht: (2012)
von: V. L. Brydun, et al.
Veröffentlicht: (2012)
Stochastic characteristics of a WT rotor mechanical loads
von: P. P. Pekur
Veröffentlicht: (2014)
von: P. P. Pekur
Veröffentlicht: (2014)
Restoration of worn helical coarse pitch gears by electroslag cladding
von: S. M. Kozulin, et al.
Veröffentlicht: (2021)
von: S. M. Kozulin, et al.
Veröffentlicht: (2021)
Comparing power characteristics of orthogonal WT's blades of various types
von: A. I. Jakovlev, et al.
Veröffentlicht: (2014)
von: A. I. Jakovlev, et al.
Veröffentlicht: (2014)
Thermally activated deformation of nanocrystalline and coarse grained CoCrFeNiMn high entropy alloy in the temperature range 4.2–350 K
von: A. V. Podolskiy, et al.
Veröffentlicht: (2018)
von: A. V. Podolskiy, et al.
Veröffentlicht: (2018)
Surface laser treatment of sintered alloy Cu—30% (wt. ) Cr
von: V. P. Korzhov
Veröffentlicht: (2014)
von: V. P. Korzhov
Veröffentlicht: (2014)
Corrosion behavior of WC–10 wt % Ni3Al composite in acidic media
von: X. Li, et al.
Veröffentlicht: (2019)
von: X. Li, et al.
Veröffentlicht: (2019)
Hydrogen Sorption Properties and Thermal Stability of Mechanical Alloy Fabricated by Milling of Mg + 10 wt.% TiH2 + 10 wt.% Fe Powders' Mixture
von: V. D. Dobrovolskyi, et al.
Veröffentlicht: (2013)
von: V. D. Dobrovolskyi, et al.
Veröffentlicht: (2013)
The Analysis and Structuring of the Causes Impeding the Introduction of Advanced Technologies for Exchange Grain Trading
von: O. V. Vinnychenko
Veröffentlicht: (2015)
von: O. V. Vinnychenko
Veröffentlicht: (2015)
About the time of appearance of Baturyn
von: V. Kovalenko
Veröffentlicht: (2016)
von: V. Kovalenko
Veröffentlicht: (2016)
Theoretical aspects of appearing of bubbles in economy
von: P. V. Pronoza
Veröffentlicht: (2014)
von: P. V. Pronoza
Veröffentlicht: (2014)
Cellulose Obtaining from Short Flax Fiber by Oxidative and Organic Solvent Delignification
von: I. M. Dejkun, et al.
Veröffentlicht: (2011)
von: I. M. Dejkun, et al.
Veröffentlicht: (2011)
Species Composition of Mycobiota of Betula pendula Roth Coarse Woody Debris of Ukrainian Polissya
von: M. A. Holiaka, et al.
Veröffentlicht: (2017)
von: M. A. Holiaka, et al.
Veröffentlicht: (2017)
Повышенная сверхпластичность в наноструктурном магниевом сплаве Mg−10 wt% Gd
von: Кулясова, О.Б., et al.
Veröffentlicht: (2004)
von: Кулясова, О.Б., et al.
Veröffentlicht: (2004)
THE EFFECT OF Fe AND Y ON THE HYDROGEN SORPTION PROPERTIES, THERMAL STABILITY, AND KINETICS OF HYDROGEN DESORPTION FROM THE MgH2 HYDRIDE PHASE OF A MECHANICAL ALLOY Mg + 10%wt.Fe + 5%wt.Y
von: Ershova, О., et al.
Veröffentlicht: (2020)
von: Ershova, О., et al.
Veröffentlicht: (2020)
Appearance of Masonry in Poland and Ukraine
von: I. Rymarenko
Veröffentlicht: (2010)
von: I. Rymarenko
Veröffentlicht: (2010)
Criteria and Mechanisms of Appearance of Auxeticity in Cubic Syngony Crystals
von: N. D. Raranskyi, et al.
Veröffentlicht: (2015)
von: N. D. Raranskyi, et al.
Veröffentlicht: (2015)
Ähnliche Einträge
-
Features of the grain-boundary sliding development under conditions of superplasticity in an alloy with bimodal structure
von: A. V. Pojda, et al.
Veröffentlicht: (2016) -
Structural and Phase Relaxation in Superplastic Eutectic Alloy Sn—38% wt. Pb
von: V. F. Korshak, et al.
Veröffentlicht: (2015) -
Melting behavior and heat Treatment of al-mg-si-mn casting alloy alloyed with 0,1 wt.%Ti and 0,1 wt.%zr
von: V. V. Bojko, et al.
Veröffentlicht: (2014) -
Superplastic deformation of the AK4-1 alloy with a surface layer melted by electron pulse beam
von: Bryukhovetsky, V.V., et al.
Veröffentlicht: (2019) -
Production of coarse-grained high-strength microgrits to be used in drilling tools
von: O. A. Zanevskij, et al.
Veröffentlicht: (2015)