TI/ Al foils: methods of producing, properties and application in pressure welding

TI/ Al foils: methods of producing, properties and application in pressure welding

Gespeichert in:

Bibliographische Detailangaben
Datum:	2012
Hauptverfasser:	A. I. Ustinov, Ju. V. Falchenko, T. V. Melnichenko, G. K. Kharchenko, L. V. Petrushinets, E. A. Shishkin
Format:	Artikel
Sprache:	English
Veröffentlicht:	2012
Schriftenreihe:	Electrometallurgy Today
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000472338
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Producing of permanent joints of alloys on y-TiAl base using multilayer nanostructured foil Ti/Al applying the method of diffusion welding in vacuum
von: A. I. Ustinov, et al.
Veröffentlicht: (2009)

Deformational behaviour of multilayer Ti/Al foils at heating under the conditions of continuously applied loads
von: A. I. Ustinov, et al.
Veröffentlicht: (2013)

Vacuum diffusion welding of γ-TiAl intermetallic with high-temperature nickel alloy with application of intermediate Al/Ni nanolayers
von: Ju. V. Falchenko, et al.
Veröffentlicht: (2019)

Influence of heating rate on temperature of inflammation of multilayer foil Ti/Al
von: D. N. Kuzmenko, et al.
Veröffentlicht: (2014)

Vacuum diffusion welding of foil from powder nickel-chromium alloy
von: I. A. Gusarova, et al.
Veröffentlicht: (2017)

Phase transformations in heating multi-layer foil Al/Cu produced by the method of electron beam deposition
von: L. A. Olikhovskaja, et al.
Veröffentlicht: (2009)

Effect of defected structure of multilayer reaction foils Al/Ti and Al/Ni on phase and structural transformations during heating
von: T. V. Melnichenko
Veröffentlicht: (2014)

Vacuum diffusion bonding of alloy on γ-TiAl base using nanolayers interlayers
von: G. K. Kharchenko, et al.
Veröffentlicht: (2011)

Peculiarities of producing Al-Ti bimetal sheet joints by the method of vacuum diffusion welding
von: Yu. V. Falchenko, et al.
Veröffentlicht: (2020)

Diffusion vacuum welding of intemetallic alloy γ-TiAl with steel 12Kh18N10T
von: G. K. Kharchenko, et al.
Veröffentlicht: (2012)

Investigation of phase transformations and plastic deformation at continuous heating of multilayer Al/Cu foil
von: A. I. Ustinov, et al.
Veröffentlicht: (2009)

Vacuum diffusion welding of stainless steel through porous nickel interlayers
von: A. I. Ustinov, et al.
Veröffentlicht: (2015)

Producing of high-strength thermosensitive bimetal invar/copper foils by the method of electron beam deposition
von: A. I. Ustinov, et al.
Veröffentlicht: (2017)

Influence of microstructure of multilayer Al/Ni foils on phase transformations initiated by heating
von: A. I. Ustinov, et al.
Veröffentlicht: (2022)

Pressure welding of micro-dispersed composite material AMg5 + 27 % Al2O3 with application of rapidly solidified interlayer of eutectic composition Al + 33 % Cu
von: Ju. V. Falchenko, et al.
Veröffentlicht: (2010)

Structure and properties of coatings of Ti, Ti36Al, Ti/Al, produced by the method of vacuum arc evaporation
von: A. V. Demchishin, et al.
Veröffentlicht: (2009)

Effect of ageing of reaction multilayer Al/Ni foils on rate of SHS. reaction front spreading
von: S. A. Demchenkov, et al.
Veröffentlicht: (2017)

Diffusion welding of steel to tin bronze through porous interlayers of nickel and copper
von: A. I. Ustinov, et al.
Veröffentlicht: (2015)

Evaluation of thermal resistance of three-layer honeycomb panel produced of alloy YuIPM-1200 by the method of vacuum diffusion welding
von: I. A. Gusarova, et al.
Veröffentlicht: (2016)

Influence of temperature of heating in vacuum on behaviour of oxide film on the surface of γ-TiAl intermetallic alloy
von: Ju. V. Falchenko, et al.
Veröffentlicht: (2017)

Peculiaries of resistance welding of copper with aluminium alloys using nanostructured foil of Al-Cu system
von: V. S. Kuchuk-Jatsenko
Veröffentlicht: (2011)

Structure of γ-TiAl joints in resistance butt welding with application of interlayers
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2015)

Resistance welding of titanium aluminides using nanolayer aluminium-titanium foils
von: V. S. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2009)

Effect of structure on properties of Al203 and Al (or Ti) mechanical mixture coatings produced by multichamber detonation spraying method
von: L. I. Markashova, et al.
Veröffentlicht: (2017)

Flexible foiled dielectrics: classification and analysis of ways for application and improvement
von: A. V. Vorobev, et al.
Veröffentlicht: (2014)

Influence of thermodynamic and structural parameters of multilayer foils on CBC process characteristics
von: M. V. Kravchuk, et al.
Veröffentlicht: (2015)

The force effect initiated by the SHS reaction in nanolayered interlayer on the surfaces being welded
von: E. A. Velikoivanenko, et al.
Veröffentlicht: (2011)

Structure formation in multilayer reaction system Ti/Al
von: T. V. Melnichenko
Veröffentlicht: (2013)

Modern technological methods of pressure welding of magnesium alloys (Review)
von: Yu. V. Falchenko, et al.
Veröffentlicht: (2022)

Producing of thick vacuum condensates of high-entropic alloys CrFeCoNiCu and AlCrFeCoNiCu by the method of electron beam deposition
von: A. I. Ustinov, et al.
Veröffentlicht: (2019)

Scandium effect on the properties and structure of alloys of Al-Zn-Mg-Cu system and their welded joints
von: V. E. Fedorchuk, et al.
Veröffentlicht: (2019)

Application of a layered composite material based on aluminium and titanium alloys to produce welded three-layer honeycomb panels
von: L. V. Petrushynets, et al.
Veröffentlicht: (2022)

Manufacture of stainless steel – aluminium transition pieces using method of pressure welding in vacuum
von: G. K. Kharchenko, et al.
Veröffentlicht: (2012)

Resistance butt welding of heat-resistant nickel alloy with use of nanostructured foils
von: V. S. Kuchuk-Jatsenko
Veröffentlicht: (2011)

Microstructure and properties of multilayer materials on Ti–6Al–4V alloy base, produced by powder technology
von: O. M. Ivasishin, et al.
Veröffentlicht: (2018)

Secondary electron emission from thin aluminum foils produced by high-energy electron beams
von: Karpus, S.H., et al.
Veröffentlicht: (2021)

Conditions of producing defect-free quasi-crystalline Al–Cu–Fe coatings using the method of electron beam deposition in vacuum
von: S. S. Polishchuk, et al.
Veröffentlicht: (2014)

Behavior of silicides of Ti—Zr—Si system and their effect on properties of welded joints of heat-resistant titanium alloys, produced by press welding
von: G. M. Grigorenko, et al.
Veröffentlicht: (2013)

Physical and mechanical properties of composite electrochemical coatings and Ni-based foils reinforced by Al2O3
von: M. D. Sakhnenko, et al.
Veröffentlicht: (2017)

Conditions for propagation of the SHS reaction front in nanolayered foils in contact with heat-conducting material
von: T. V. Zaporozhets, et al.
Veröffentlicht: (2011)