Buchumschlag

Determining cutting force components in deep grinding of revolution surfaces by oriented el&#039;bor wheel

Gespeichert in:

Bibliographische Detailangaben
Datum:	2012
Hauptverfasser:	V. I. Kalchenko, N. N. Pogiba, D. V. Kalchenko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2012
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000697994
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Peculiarities of shape change of the cutting surface of the grinding wheel in the circular direction when grinding wheels with a mixture of SHM grinding powders and with a modified surface of their grains
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2022)

Determination of grinding conditions for renewal of a wheel cutting ability allowing for its variation during the machining process
von: P. G. Matjukha, et al.
Veröffentlicht: (2017)

Grinding of gear wheels by diamond-abrasive wheels
von: S. V. Rjabchenko
Veröffentlicht: (2017)

Gear grinding with superabrasive dish wheels
von: S. V. Rjabchenko
Veröffentlicht: (2014)

Gear grinding with superabrasive dish wheels
von: S. V. Rjabchenko
Veröffentlicht: (2014)

The finish grinding process of cylindrical surfaces by cup grinding diamond wheels
von: S. V. Rjabchenko, et al.
Veröffentlicht: (2018)

Diamond grinding of the WC–8Co–steel 45 composition using the control of the wheel cutting ability by an electroerosion method
von: A. V. Burdin, et al.
Veröffentlicht: (2013)

Adhesively active dressing of conventional abrasive and diamond grinding wheels
von: A. A. Adamovskij, et al.
Veröffentlicht: (2015)

Specifying the process parameters for diamond dressing of grinding wheels
von: Ya. O. Shakhbazov, et al.
Veröffentlicht: (2019)

Highly porous cubic boron nitride wheels for dry grinding
von: V. K. Starkov
Veröffentlicht: (2013)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites
von: V. I. Lavrinenko
Veröffentlicht: (2019)

Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding
von: V. I. Lavrinenko
Veröffentlicht: (2016)

Rotational scheme of a high-efficient dressing of grinding wheels from cubic boron nitride
von: D. Hessel, et al.
Veröffentlicht: (2015)

Wear of a diamond wheel during grinding of ceramic balls from silicon carbide
von: S. V. Sokhan, et al.
Veröffentlicht: (2020)

Features of connection between parameters of roughness of the processed surface at grinding by wheels from a mix of grinding powders of SHM with the modified surface of grains
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2021)

On the use of variously dispersed powders from compacts of synthetic and natural diamonds with carbon binder in grinding wheels
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2016)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
von: Ye. Stakhniv, et al.
Veröffentlicht: (2022)

Influence of the prescribed composition on hardness of a grinding wheel with a decreased concentration of cubic boron nitride
von: V. K. Starkov, et al.
Veröffentlicht: (2015)

The impact of frictional interaction when cutting became the diamond wheel on wear of polycrystals of diamond
von: A. M. Kuzej, et al.
Veröffentlicht: (2019)

СNB wheels for grinding high-speed steel without cooling: specific processing energy and energy efficiency
von: V. I. Lavrinenko
Veröffentlicht: (2024)

Effect of Grinding Parameters on the Surface Quality of Cutting Tools Made of High-Speed Low-Alloy Steels
von: Jaworski, J., et al.
Veröffentlicht: (2016)

On calculation of cutting forces and characteristics of the contact interaction of a chip with the tool in cutting plastic metals
von: A. A. Vinogradov
Veröffentlicht: (2013)

Forced Vibrations of Piezoceramic Cylindrical Shell with Longitudinal Cut
von: V. L. Karlash
Veröffentlicht: (2015)

The quality of workpiece surface in rough machining of materials with different hardness values by using segmented grinding wheels produced in Vietnam
von: T. P.G. Nguen
Veröffentlicht: (2016)

Numerical simulation of multibeam systems by EL&ION code
von: Martynenko, P.A.
Veröffentlicht: (2020)

The influence of cutting speed on cutting temperatures and forces in fine turning of VT1-0 titanium alloy by a PCD tool
von: L. N. Devin, et al.
Veröffentlicht: (2019)

Development of SSR Markers for Psammochloa villosa (Trin.) Bor (Poaceae), a Dominant Species in the Inner Mongolian Plateau
von: Y.-P. Liu, et al.
Veröffentlicht: (2021)

Distribution regularities of the carabus of the tribe Pterostichini (Coleoptera, Carabidae) from the flood-land and arenaceous ecosystems of the Samarskiy bor
von: V. V. Brigadirenko
Veröffentlicht: (1999)

The process of abrasive processing as frictional interaction: a factor of the sludge availability on the cutting surface of diamond wheels
von: V. I. Lavrinenko
Veröffentlicht: (2020)

The influence of surface roughness of cutting inserts made of diamond–tungsten carbide composite on cutting forces and machining quality in turning aluminum alloys and brass
von: L. N. Devin, et al.
Veröffentlicht: (2018)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 1. Superabrasive composites
von: V. I. Lavrinenko
Veröffentlicht: (2019)

Characteristics of growth and elastase production by mutant of Bacillus sp. 27-88ELS+
von: E. V. Matseliukh, et al.
Veröffentlicht: (2011)

Microphytobenthos of the Red Sea Coast in the area of Sharm-el-Sheikh (Egypt)
von: V. P. Gerasimjuk
Veröffentlicht: (2019)

Formation of resistance forces during free wheel transport rolling along the flat rails
von: V. P. Franchuk, et al.
Veröffentlicht: (2016)

Cast grinding bodies
von: Ju. V. Moiseev, et al.
Veröffentlicht: (2017)

London forces in highly oriented pyrolytic graphite
von: L. V. Poperenko, et al.
Veröffentlicht: (2017)

Development of the technology for manufacturing and introducing a new Class of tools with CvD Diamond for Grinding high-Precision Gear Wheels of special Gear units
von: Ye. O. Pashchenko, et al.
Veröffentlicht: (2020)

RELICS OF PALEOFLORA IN IMPACT MELT ROCKS OF THE EL’GYGYTGYN CRATER IN CHUKOTKA (RUSSIA)
von: Gurov, Y.P., et al.
Veröffentlicht: (2019)

Morphology of Peridinium gatunense Nyg. (Dinophyta) from Lake El Padre (Mexico)
von: A. F. Krakhmalnyj, et al.
Veröffentlicht: (2006)

Forced Resonance Vibrations and Dissipative Heating of Body of Revolution from Viscoelastic Piezoelectric Material
von: V. G. Karnaukhov, et al.
Veröffentlicht: (2015)