Buchumschlag

Computer and experimental studies on the distribution of hardness of a steel tool body caused by phase transformations during the induction hardening

Gespeichert in:

Bibliographische Detailangaben
Datum:	2012
Hauptverfasser:	V. A. Dutka, A. L. Maistrenko, V. A. Lukash, O. V. Melnychuk, L. M. Vyrovets
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2012
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000697995
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Computer simulation of the temperature field in sintering carbide composites when induction and beam heatings are used
von: V. A. Dutka
Veröffentlicht: (2013)

Peculiarities of induction brazing of diamond-hard-alloy cutters with body wing of composite drilling bit
von: B. V. Stefaniv
Veröffentlicht: (2013)

Plasma hardening of cutting edges of soil-cultivating tool
von: S. S. Samotugin, et al.
Veröffentlicht: (2009)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
von: V. K. Starkov, et al.
Veröffentlicht: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
von: V. K. Starkov, et al.
Veröffentlicht: (2014)

Application of ultrasonic packet pulses of raleigh waves for testing the hardness of surface-hardened metals
von: S. Y. Pliesnetsov, et al.
Veröffentlicht: (2023)

Causes of fracture and methods of hardening of copper plates of moulds of machines of continuous casting of billets
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2014)

Hardening of Cr-Fe-Ni-Mn high-entropy alloys caused by the irradiation with argon ions
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2017)

Non-destructive control of hardness of cast-iron grinding bodies
von: V. A. Tverdokhvalov, et al.
Veröffentlicht: (2017)

Producing of rapidly hardened alloys by the method of dispersion during induction melting in a sectional mould
von: V. A. Shapovalov, et al.
Veröffentlicht: (2009)

Thermal state of hardening disc during extraction from melt in induction melting in sectional crystallizer
von: D. A. Kalashnik, et al.
Veröffentlicht: (2018)

Equipment on base of lathe tools for mill roll hard-facing
von: V. I. Titarenko, et al.
Veröffentlicht: (2013)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Assessment of edge damageability of hard alloy tools under local loading
von: V. V. Khvorostjanyj, et al.
Veröffentlicht: (2015)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
von: V. M. Bushlja, et al.
Veröffentlicht: (2014)

Influence of structure of hybrid super hard material on the performance of drilling tool
von: R. K. Bogdanov, et al.
Veröffentlicht: (2016)

Study of degradation mechanism of metal-cutting tools and their hardening by ZrN PVD coatings
von: Skoblo, T.S., et al.
Veröffentlicht: (2018)

Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
von: Kryzhanivskyy, V., et al.
Veröffentlicht: (2017)

Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
von: V. Kryzhanivskyy, et al.
Veröffentlicht: (2017)

Contact problems on elastic bodies motion along hard surfaces
von: V. I. Kuzmenko, et al.
Veröffentlicht: (2013)

The fundamentals of synthesis of modified layers on cutting-tool hard alloys
von: S. S. Samotugin, et al.
Veröffentlicht: (2017)

Ontology Application to Construct Inductive Modeling Tools with Intelligent Interface
von: Pidnebesna, H.A., et al.
Veröffentlicht: (2020)

Ontology Application to Construct Inductive Modeling Tools with Intelligent Interface
von: H. A. Pidnebesna, et al.
Veröffentlicht: (2020)

Experimental study of material hardness during reversive enclosed broaching
von: S. V. Miroshnichenko, et al.
Veröffentlicht: (2012)

Computer simulation tools in the field of computational hydrodynamics
von: S. O. Holubiev, et al.
Veröffentlicht: (2019)

Cause of secondary hardening in Cr–Mo–V weld during long-term heat exposure
von: P. Mogila, et al.
Veröffentlicht: (2011)

The effect of probiotic therapy on development of experimental obesity in rats caused by monosodium glutamate
von: O. A. Savcheniuk, et al.
Veröffentlicht: (2014)

Frequency limits for conducting graphene channel caused by quantum capacitance and kinetic inductance
von: M. V. Strikha
Veröffentlicht: (2015)

Frequency limits for conducting graphene channel caused by quantum capacitance and kinetic inductance
von: M. V. Strikha
Veröffentlicht: (2015)

Theoretical and experimental study of the effectiveness of adjustable induction electric drive
von: V. S. Petrushyn, et al.
Veröffentlicht: (2020)

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2016)

Prospects and feasibility of application of the combined technologies of hardening and deposition coatings for hardening items in mechanical engineering and tool manufacturing ( I. Physical and technical aspects)
von: G. I. Kostjuk
Veröffentlicht: (2003)

Prospects and reality of application of the combined technologies of hardening and drawing of coverings for hardening details of mechanical engineering and in tool manufacture (II. Theoretic and systems aspects)
von: G. I. Kostjuk
Veröffentlicht: (2004)

Wear and life of tools with inserts from cBN-based polycrystalline superhard materials in the finish turning of hardened steels at heavy feeds
von: S. A. Klimenko, et al.
Veröffentlicht: (2012)

Experimental estimation of the efficiency of a lowfrequency induction logging multiprobe complex
von: N. L. Mirontsov, et al.
Veröffentlicht: (2020)

The design synthesis tools of submersible induction motors of innovative sonstructures
von: I. V. Holovan, et al.
Veröffentlicht: (2022)

Local slip of bodies caused by a heterogeneous friction coefficient
von: N. I. Malanchuk
Veröffentlicht: (2010)

Complex design tools for improvement of electromechanical systems with induction motors
von: O. M. Popovych, et al.
Veröffentlicht: (2022)

Work hardening of steel with a bainite structure
von: V. E. Gromov, et al.
Veröffentlicht: (2015)

Study of the contact zone parameters and stresses on the rake face of a tool equipped by a cBN-based PSHM in turning hardened steel
von: S. A. Klimenko, et al.
Veröffentlicht: (2015)