Buchumschlag

Phase transformations in low-carbon steels, alloyed a manganese

Gespeichert in:

Bibliographische Detailangaben
Datum:	2012
Hauptverfasser:	M. F. Evsjukov, Zh. A. Dementeva, P. D. Grushko, Zh. Z. Chekhuta
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2012
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000839358
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

On the kinetics of bainite transformation of austenite in steel during heat treatment in the production flow
von: M. F. Evsjukov, et al.
Veröffentlicht: (2014)

Effect of manganese on structure and wear resistance of deposited metal of the low-carbon steel type
von: V. L. Malinov
Veröffentlicht: (2011)

Prediction of temperatures of phase transformations in high-strength low-alloy steels
von: G. M. Grigorenko, et al.
Veröffentlicht: (2013)

About the austenite transformation kinetics in steels under non-equilibrium conditions
von: M. F. Evsjukov, et al.
Veröffentlicht: (2013)

On the kinetics of phase transformations in high-tensile cast irons with heat recalescence considering
von: M. F. Evsjukov, et al.
Veröffentlicht: (2012)

Analysis of Gas Nitriding Characteristics under Different Cold Hardening and Nitriding Pressure Conditions for Low-Carbon Low-Alloy Steel
von: Zhou, Z A., et al.
Veröffentlicht: (2018)

Structure and properties of sintered manganese steels with different carbon contents
von: H. A. Bahliuk, et al.
Veröffentlicht: (2010)

Effect of cyclic martensitic gamma-epsilon-gamma transformations on diffusion characteristics of carbon in an iron-manganese alloy
von: V. Y. Bondar, et al.
Veröffentlicht: (2018)

Effect of Cyclic Martensitic γ-ε-γ Transformations on Diffusion Characteristics of Carbon in an Iron–Manganese Alloy
von: Bondar, V.Y., et al.
Veröffentlicht: (2018)

Features of phase-structural transformations during cooling of chromium steels for a hot deformation tool
von: S. V. Bobyr, et al.
Veröffentlicht: (2014)

Fatigue of low-carbon and low-alloys steels under conditions of Fretting
von: G. V. Tsybanev, et al.
Veröffentlicht: (2009)

Features of the phase-structural transformations during tempering of the low-alloyed steels for hot working dies
von: S. V. Bobyr, et al.
Veröffentlicht: (2012)

Arc brazing of low-carbon steels
von: V. F. Khorunov, et al.
Veröffentlicht: (2013)

The effect of heating temperature and carbon content on the growth of austenite grains in carbon steels for manufacture of railway wheels
von: A. I. Babachenko, et al.
Veröffentlicht: (2015)

Improvement of the procedure of analysis of thermokinetic diagrams of phase transformations in metal of high-strength low-alloy steel welds
von: V. A. Kostin, et al.
Veröffentlicht: (2021)

The features of manganese liquid-phase reduction in the converter process with low-voltage electric potential
von: T. S. Golub, et al.
Veröffentlicht: (2017)

The features of manganese liquid-phase reduction in the converter process with low-voltage electric potential
von: S. I. Semykin, et al.
Veröffentlicht: (2017)

Reinforcing phases, structure and properties of modified welds of low-alloyed steels
von: V. V. Golovko, et al.
Veröffentlicht: (2016)

Formation of structural-phase states, defect substructure and properties of a surface of thermomechanically hardened low-carbon steel
von: V. E. Gromov, et al.
Veröffentlicht: (2016)

Specific Boundaries in Ferrite of Low-Carbon Steels
von: G. D. Sukhomlin
Veröffentlicht: (2013)

Research of opportunities of increase of level of residual manganese in metal by production of low-carbonaceous brands of steel
von: T. S. Golub, et al.
Veröffentlicht: (2015)

Modeling the phase-structural state and controlling the properties of metal of Fe-Cr-Mn alloying system, deposited on low-carbon structural steel
von: Ja. A. Chejljakh, et al.
Veröffentlicht: (2018)

Effect of cyclic martensitic γ-ε transformations on diffusion characteristics of cobalt in an iron–manganese alloy
von: Yu. Danilchenko, et al.
Veröffentlicht: (2019)

State-of the-art of developments and application of flux-cored wires for welding carbon and low-alloy steels
von: V. N. Shlepakov, et al.
Veröffentlicht: (2010)

Characteristics of destruction of complex alloyed steels for cementation
von: Ye. Kondratiuk, et al.
Veröffentlicht: (2017)

Structure of low-carbon steel after a warm twist extrusion
von: O. H. Pashynska
Veröffentlicht: (2013)

Regularities and mechanisms of thermomechanical hardening of rolled low-carbon steel
von: V. E. Gromov, et al.
Veröffentlicht: (2011)

Crystallization of calcium carbonate in magnetized water at presence of iron and manganese ions
von: V. V. Goncharuk, et al.
Veröffentlicht: (2011)

Wear resistance of surfaced metal of type of carbon and chromium-manganese steels under conditions of dry friction of sliding of metal against metal
von: V. D. Kuznetsov, et al.
Veröffentlicht: (2013)

The Role of Manganese and Liquid-Phase Electric Treatment on the Formation of Iron-Containing Phases in Predeutectic Alloys of the Al-Si-−Fe-Mn System
von: A. H. Pryhunova
Veröffentlicht: (2020)

D-optimal mixture design of Fe-based pre-alloyed diamond bit matrix with low liquid phase content
von: Zh. Wang, et al.
Veröffentlicht: (2021)

Nitride hardening influence on the phase transformation and the formation of high-carbon steel structure upon cooling after austenitizing
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2014)

The influence of nanoparticles of modifiers on the kinetics of transformation of high-strength low-alloy steels in metal welds
von: G. M. Grigorenko, et al.
Veröffentlicht: (2016)

Comparative analysis of the kinetics of martensitic transformation in low-alloy structural steel by dilatometric and calculation methods
von: I. M. Chuiko, et al.
Veröffentlicht: (2024)

Improving of converter steel complex deoxidation with silicium, manganese and aluminum
von: A. A. Larionov, et al.
Veröffentlicht: (2012)

On the formation of the primary structure and properties of economic-alloyed chromo-manganese alloys in a cast state
von: M. A. Kovzel, et al.
Veröffentlicht: (2022)

Producing of titanium alloy OT4, alloyed with manganese, in electroslag chamber-type furnace
von: I. V. Protokovilov, et al.
Veröffentlicht: (2019)

Effect of thermal cycle of welding on structural-phase transformations and properties of HAZ metal of medium-carbon alloyed steel of 30Kh2N2MF type
von: V. D. Poznjakov, et al.
Veröffentlicht: (2015)

Low carbon steel for hot metal deformation tools (review)
von: S. V. Bobyr, et al.
Veröffentlicht: (2019)

The influence of mechanical loading on the local remanence low-Carbon steels
von: Ju. V. Moiseev, et al.
Veröffentlicht: (2014)