Buchumschlag

Distribution of initial ingot structural zones in elements of rolled centers of diesel wheels

Gespeichert in:

Bibliographische Detailangaben
Datum:	2012
Hauptverfasser:	M. S. Valetov, V. M. Kuzmichjov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2012
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000839507
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

An analysis of working conditions for locomotive wheel centers
von: V. M. Kuzmichjov, et al.
Veröffentlicht: (2015)

Increase of wheel centers reliability
von: V. M. Kuzmichev, et al.
Veröffentlicht: (2012)

Investigations of residual stresses in whole-rolled railway wheels
von: A. V. Koshuljan, et al.
Veröffentlicht: (2013)

Peculiarities of mathematical modelling for steel ingots heating before rolling
von: E. N. Shebanits, et al.
Veröffentlicht: (2012)

Regulatory documents about wheel for railway rolling stock production requirements analysis
von: I. H. Uzlov, et al.
Veröffentlicht: (2012)

Structure and mechanical properties of heat-affected zone of restored railway wheels
von: O. A. Haivoronskyi, et al.
Veröffentlicht: (2015)

Use of gas-and-diesel power system in the wheeled tractors K-701 as one of the methods for saving resources by exploiting eneterprises
von: O. D. Pochuzhevskyi
Veröffentlicht: (2015)

Formation of resistance forces during free wheel transport rolling along the flat rails
von: V. P. Franchuk, et al.
Veröffentlicht: (2016)

Application of electric slag and vacuum-arc remelts to improve the quality of the metal of the all-rolled railway wheels
von: M. I. Gasik, et al.
Veröffentlicht: (2019)

Features of mixing diesel fuels
von: E. B. Shevchenko, et al.
Veröffentlicht: (2012)

Structural–semantic Elements of Initiation Riot in the Postmodern Novel
von: S. V. Isaienko
Veröffentlicht: (2003)

Hodographs of interaction of elements of bevel drive in the rolling stand
von: M. M. Kipin
Veröffentlicht: (2021)

THE IMPACT OF DIESEL AND VARIOUS BLENDS OF BIODIESEL ON PERFORMANCE, EMISSIONS, AND COMBUSTION IN DI DIESEL ENGINES
von: Sekharraj , K., et al.
Veröffentlicht: (2026)

Calculating cyclical thermomechanical stresses in work rolls during hot strip rolling by finite element method
von: Ju. Prikhodko, et al.
Veröffentlicht: (2013)

Producing ingots of heat-resistant alloy KhN73MBTYu using method of ESR of wastes of rolling production
von: S. V. Skripnik, et al.
Veröffentlicht: (2010)

Influence of heat transfer intensity in secondary cooling zone on continuous cast ingot forming
von: I. V. Korniets, et al.
Veröffentlicht: (2014)

Modeling valkovoe casting-rolling of aluminum by finite element method
von: Ju. Prikhodko, et al.
Veröffentlicht: (2014)

Investigation of process of manufacture of hot-rolled pipes of titanium alloy VT20 ingots, produced by the method of electron beam melting
von: N. P. Trigub, et al.
Veröffentlicht: (2010)

Grinding of gear wheels by diamond-abrasive wheels
von: S. V. Rjabchenko
Veröffentlicht: (2017)

Development three-dimensional final element models non-stationary thermalelastic stress the piston of the tractor diesel engine
von: A. P. Strokov, et al.
Veröffentlicht: (2010)

Mathematic modeling the oxygen distribution mechanism in Si ingots during growing processes
von: Oksanich, A.P., et al.
Veröffentlicht: (2004)

Analyzing the existing types of wind-diesel systems
von: A. M. Donets
Veröffentlicht: (2014)

Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)

Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: E. I. ulfugarov
Veröffentlicht: (2014)

Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)

Initial stage of recovery of infrastructure and rolling stock of Railways of the Western regions of Ukraine
von: T. V. Sheleiko
Veröffentlicht: (2014)

Analysis of the amount of retained austenite in the structure of steel rolls for sheet rolling
von: S. V. Bobyr, et al.
Veröffentlicht: (2020)

Increase of brittle fracture resistance of metal of heat-affected zone in railway wheel surfacing
von: A. A. Gajvoronskij, et al.
Veröffentlicht: (2017)

Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
von: S. E. Kondratiuk, et al.
Veröffentlicht: (2016)

Structure and wear resistance of retailoring wheel flange
von: S. A. Bespalov
Veröffentlicht: (2009)

Influence of content of alloying elements and heat treatment on resource characteristics of high-strength wheel steels during manufacture of railway wheels and their repair during surfacing
von: O. P. Ostash, et al.
Veröffentlicht: (2020)

Influence of the special features of contact interaction of the thin strip with rolls on the parameters of the initial setting of the working stand and the least thickness of the rolled strip
von: Ja. D. Vasilev, et al.
Veröffentlicht: (2019)

Some issues of wind-diesel power plants production
von: A. M. Donets, et al.
Veröffentlicht: (2014)

Improvement of quality of large ingots
von: F. K. Biktagirov, et al.
Veröffentlicht: (2011)

Crystallization and structure of steel ingots under conditions of endogenous vibration treatment
von: Ye. Kondratiuk, et al.
Veröffentlicht: (2018)

Near sources of creation of domestic diesel engine
von: Yu. V. Kosovets
Veröffentlicht: (2015)

Structure of molybdenum ingots, modified by dispersed particles of the second phase
von: V. O. Mushegjan
Veröffentlicht: (2012)

On Control of a Wheeled Transport Robot with Two Steering Wheels
von: V. B. Larin
Veröffentlicht: (2017)

On the problem of formation of large forge ingots
von: V. M. Shchehlov
Veröffentlicht: (2016)

Research of expediency of equipping three-point linkage of the modern wheeled tractors with elastic elements
von: O. A. Chernii
Veröffentlicht: (2014)