Cover Image

Features of the phase-structural transformations during tempering of the low-alloyed steels for hot working dies

Saved in:

Bibliographic Details
Date:	2012
Main Authors:	S. V. Bobyr, G. V. Levchenko, E. G. Djomina, V. L. Pljuta, D. V. Loshkarjov
Format:	Article
Language:	English
Published:	2012
Series:	Fundamental and applied problems of ferrous metallurgy
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000839510
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

The research of temperature influence and tempering time on a structure and properties of steel to the instrument of hot deformation
by: E. E. Nefedeva, et al.
Published: (2014)

Low carbon steel for hot metal deformation tools (review)
by: S. V. Bobyr, et al.
Published: (2019)

The Nonequilibrium Thermodynamic Analysis of Process of Formation of Carbides in Chromium Steel During Tempering
by: S. V. Bobyr
Published: (2014)

Die Steel with Regulated Austenitic Transformation for Hot Deformation of Copper-Nickel Alloy
by: K. O. Gogaev, et al.
Published: (2022)

The modeling and optimization of tempering 17H5MA tool hot deformation
by: S. V. Bobyr, et al.
Published: (2015)

Shanging the physical properties of alloy steels during the development of high temper brittleness
by: S. N. Poljakov, et al.
Published: (2015)

Features of phase-structural transformations during cooling of chromium steels for a hot deformation tool
by: S. V. Bobyr, et al.
Published: (2014)

Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
by: A. M. Nesterenko, et al.
Published: (2009)

Features of structure sheet low alloy steel in combined heat treatment
by: V. L. Pljuta, et al.
Published: (2015)

Effect of drawing dies with shear on the structure and the properties of low-carbon steel
by: E. G. Pashinskaja, et al.
Published: (2015)

Influence of tempering modes on fine structure parameters, stress and hardness of 25Cr2Mo1V steel
by: S. V. Bobyr, et al.
Published: (2019)

Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die
by: Jiang, Q.Y., et al.
Published: (2018)

Prediction of temperatures of phase transformations in high-strength low-alloy steels
by: G. M. Grigorenko, et al.
Published: (2013)

External Stress Effect on Microstructure and Transformation Plasticity of Hot Work Tool Steel during Quenching
by: Janutienë, R.K., et al.
Published: (2015)

Reinforcing phases, structure and properties of modified welds of low-alloyed steels
by: V. V. Golovko, et al.
Published: (2016)

Simulation of phase transformations in alloy steels subjected to cooling during heat treatment of rolling-mill rolls
by: S. V. Bobyr, et al.
Published: (2017)

Phase transformations in low-carbon steels, alloyed a manganese
by: M. F. Evsjukov, et al.
Published: (2012)

Increase of heat resistance and properties of die steel with control of austenitic transformation during operation
by: O. M. Sydorchuk, et al.
Published: (2019)

Features of microalloying with boron during smelting of low-alloy structural steels
by: Ju. Nazjuta, et al.
Published: (2018)

Isothermal Martensitic Transformation in a Tool Steel and Its Effect on Carbide Formation under Tempering
by: V. A. Sirosh, et al.
Published: (2014)

Influence of nonmetallics on formation of pores during hot rolling of bearing steel
by: O. M. Moroz, et al.
Published: (2015)

Fatigue of low-carbon and low-alloys steels under conditions of Fretting
by: G. V. Tsybanev, et al.
Published: (2009)

Analysis of phase-structural transformations during cooling of steels, taking into account the deformations and stresses
by: S. V. Bobyr, et al.
Published: (2018)

Influence of low-temperature tempered structure and properties of welded joints of high-strength steel 30Kh2N2MF
by: O. A. Haivoronskyi, et al.
Published: (2020)

Account for pore formation in heat treatment of welded elements of steels, prone to initiation of temper cracks
by: V. I. Makhnenko, et al.
Published: (2013)

Formation of structure, phase composition and faulty substructure in the bulk- and differentially-hard-tempered rails
by: V. E. Gromov, et al.
Published: (2014)

Features of formation of structure and properties in the hot-rolled steel alloyed with chromium, molybdenum and vanadium
by: T. N. Golubenko, et al.
Published: (2012)

Evaluation of heat-resistant steels tendency to tempering brittleness by using high-temperature tests
by: Ju. Skulskij, et al.
Published: (2016)

Extreme pressure properties of lubricants under die casting aluminum alloys
by: A. M. Mikhaltsov, et al.
Published: (2011)

Physical model of W and Ti compound during hot vacuum rolling in the solid phase
by: Andrieieva, O.L., et al.
Published: (2023)

Comparative analysis of the kinetics of martensitic transformation in low-alloy structural steel by dilatometric and calculation methods
by: I. M. Chuiko, et al.
Published: (2024)

Constitutive Equations and Processing Maps for 49MnVS3 Non-Quenched and Tempered Steel
by: Y. F. Chen, et al.
Published: (2014)

Hot electrons in metal films at low temperatures
by: V. A. Shklovskij
Published: (2018)

Regularities of the retained austenite formation in the complexly alloyed steel (overview)
by: S. V. Bobyr, et al.
Published: (2021)

Study on the effect of induction heating to prevent hot cracking during laser welding of aluminium alloys
by: V. V. Somonov, et al.
Published: (2013)

Improvement of the procedure of analysis of thermokinetic diagrams of phase transformations in metal of high-strength low-alloy steel welds
by: V. A. Kostin, et al.
Published: (2021)

Effect of high-temperature thermocycling on deposited metal of die heat-resistant steels type
by: I. A. Rjabtsev, et al.
Published: (2012)

Finite Element Calculation of Clinching with Rigid Die of Three Steel Sheets
by: Kaščák, L., et al.
Published: (2017)

Study of deformation-thermal treatment effect on structure formation for transitional class alloys in the system Fe-C-Mn-Cr
by: G. V. Levchenko, et al.
Published: (2013)

Hydrogen embrittlement of cold drawn prestressing steels: the role of the die inlet angle
by: Toribio, J., et al.
Published: (2013)