Buchumschlag

Features of the phase-structural transformations during tempering of the low-alloyed steels for hot working dies

Gespeichert in:

Bibliographische Detailangaben
Datum:	2012
Hauptverfasser:	S. V. Bobyr, G. V. Levchenko, E. G. Djomina, V. L. Pljuta, D. V. Loshkarjov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2012
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000839510
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The research of temperature influence and tempering time on a structure and properties of steel to the instrument of hot deformation
von: E. E. Nefedeva, et al.
Veröffentlicht: (2014)

Low carbon steel for hot metal deformation tools (review)
von: S. V. Bobyr, et al.
Veröffentlicht: (2019)

The Nonequilibrium Thermodynamic Analysis of Process of Formation of Carbides in Chromium Steel During Tempering
von: S. V. Bobyr
Veröffentlicht: (2014)

Die Steel with Regulated Austenitic Transformation for Hot Deformation of Copper-Nickel Alloy
von: K. O. Gogaev, et al.
Veröffentlicht: (2022)

The modeling and optimization of tempering 17H5MA tool hot deformation
von: S. V. Bobyr, et al.
Veröffentlicht: (2015)

Shanging the physical properties of alloy steels during the development of high temper brittleness
von: S. N. Poljakov, et al.
Veröffentlicht: (2015)

Features of phase-structural transformations during cooling of chromium steels for a hot deformation tool
von: S. V. Bobyr, et al.
Veröffentlicht: (2014)

Features of structure sheet low alloy steel in combined heat treatment
von: V. L. Pljuta, et al.
Veröffentlicht: (2015)

Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
von: A. M. Nesterenko, et al.
Veröffentlicht: (2009)

Effect of drawing dies with shear on the structure and the properties of low-carbon steel
von: E. G. Pashinskaja, et al.
Veröffentlicht: (2015)

Influence of tempering modes on fine structure parameters, stress and hardness of 25Cr2Mo1V steel
von: S. V. Bobyr, et al.
Veröffentlicht: (2019)

Prediction of temperatures of phase transformations in high-strength low-alloy steels
von: G. M. Grigorenko, et al.
Veröffentlicht: (2013)

Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die
von: Jiang, Q.Y., et al.
Veröffentlicht: (2018)

External Stress Effect on Microstructure and Transformation Plasticity of Hot Work Tool Steel during Quenching
von: Janutienë, R.K., et al.
Veröffentlicht: (2015)

Simulation of phase transformations in alloy steels subjected to cooling during heat treatment of rolling-mill rolls
von: S. V. Bobyr, et al.
Veröffentlicht: (2017)

Reinforcing phases, structure and properties of modified welds of low-alloyed steels
von: V. V. Golovko, et al.
Veröffentlicht: (2016)

Phase transformations in low-carbon steels, alloyed a manganese
von: M. F. Evsjukov, et al.
Veröffentlicht: (2012)

Increase of heat resistance and properties of die steel with control of austenitic transformation during operation
von: O. M. Sydorchuk, et al.
Veröffentlicht: (2019)

Features of microalloying with boron during smelting of low-alloy structural steels
von: Ju. Nazjuta, et al.
Veröffentlicht: (2018)

Analysis of phase-structural transformations during cooling of steels, taking into account the deformations and stresses
von: S. V. Bobyr, et al.
Veröffentlicht: (2018)

Fatigue of low-carbon and low-alloys steels under conditions of Fretting
von: G. V. Tsybanev, et al.
Veröffentlicht: (2009)

Hot-cracking of high-alloyed steels evaluated by wedge rolling test
von: Schindler, I., et al.
Veröffentlicht: (2008)

Influence of nonmetallics on formation of pores during hot rolling of bearing steel
von: O. M. Moroz, et al.
Veröffentlicht: (2015)

Isothermal Martensitic Transformation in a Tool Steel and Its Effect on Carbide Formation under Tempering
von: V. A. Sirosh, et al.
Veröffentlicht: (2014)

Microstructure and Microhardness of Fiber Laser Welded Dual-Phase Steels with High-Strength Low-Alloy Steels
von: Švec, P., et al.
Veröffentlicht: (2017)

Features of formation of structure and properties in the hot-rolled steel alloyed with chromium, molybdenum and vanadium
von: T. N. Golubenko, et al.
Veröffentlicht: (2012)

Comparative analysis of the kinetics of martensitic transformation in low-alloy structural steel by dilatometric and calculation methods
von: I. M. Chuiko, et al.
Veröffentlicht: (2024)

Account for pore formation in heat treatment of welded elements of steels, prone to initiation of temper cracks
von: V. I. Makhnenko, et al.
Veröffentlicht: (2013)

Influence of low-temperature tempered structure and properties of welded joints of high-strength steel 30Kh2N2MF
von: O. A. Haivoronskyi, et al.
Veröffentlicht: (2020)

Physical model of W and Ti compound during hot vacuum rolling in the solid phase
von: Andrieieva, O.L., et al.
Veröffentlicht: (2023)

Extreme pressure properties of lubricants under die casting aluminum alloys
von: A. M. Mikhaltsov, et al.
Veröffentlicht: (2011)

Regularities of the retained austenite formation in the complexly alloyed steel (overview)
von: S. V. Bobyr, et al.
Veröffentlicht: (2021)

Formation of structure, phase composition and faulty substructure in the bulk- and differentially-hard-tempered rails
von: V. E. Gromov, et al.
Veröffentlicht: (2014)

Evaluation of heat-resistant steels tendency to tempering brittleness by using high-temperature tests
von: Ju. Skulskij, et al.
Veröffentlicht: (2016)

Hot electrons in metal films at low temperatures
von: V. A. Shklovskij
Veröffentlicht: (2018)

Study of deformation-thermal treatment effect on structure formation for transitional class alloys in the system Fe-C-Mn-Cr
von: G. V. Levchenko, et al.
Veröffentlicht: (2013)

Study on the effect of induction heating to prevent hot cracking during laser welding of aluminium alloys
von: V. V. Somonov, et al.
Veröffentlicht: (2013)

Improvement of the procedure of analysis of thermokinetic diagrams of phase transformations in metal of high-strength low-alloy steel welds
von: V. A. Kostin, et al.
Veröffentlicht: (2021)

Constitutive Equations and Processing Maps for 49MnVS3 Non-Quenched and Tempered Steel
von: Y. F. Chen, et al.
Veröffentlicht: (2014)

Constitutive Equations and Processing Maps for 49MnVS3 Non-Quenched and Tempered Steel
von: Chen, Y.F., et al.
Veröffentlicht: (2014)