Buchumschlag

High pressure densification of Cu-based powder composite materials in solid phase

Gespeichert in:

Bibliographische Detailangaben
Datum:	2011
1. Verfasser:	O. I. Tolochyn
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2011
Schriftenreihe:	Metal Science and Treatment of Metals
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000431444
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The investigations of a peculiarities of pyrocarbon gas phase densification of powders of the catalytic carbon formations (CCFS), obtained on nickel
von: Fursov, S.G., et al.
Veröffentlicht: (2021)

The pyrocarbon, gas phase densification of the catalytic carbon formations (CCFs), obtained on iron
von: Fursov, S.G., et al.
Veröffentlicht: (2023)

Elastic phase transitions in solids. High pressure effect
von: Yu. Kh. Vekilov, et al.
Veröffentlicht: (2018)

Isothermal oxidation of the Cu1–xZnx solid solution powders
von: M. V. Tymoshenko, et al.
Veröffentlicht: (2011)

Influence of phase composition on physico-mechanical properties of composites based on silicon, boron and titanium nitrides, sintered under high pressure
von: V. S. Urbanovich, et al.
Veröffentlicht: (2017)

Thermal stability of solid solutions formed by ultrasonic milling of Cu–Co and Cu–Fe powder mixtures
von: V. M. Nadutov, et al.
Veröffentlicht: (2017)

Thermal stability of solid solutions formed by ultrasonic milling of Cu–Co and Cu–Fe powder mixtures
von: V. M. Nadutov, et al.
Veröffentlicht: (2017)

Comparative analysis of properties of powders of Cu—S and Cu—P alloys got the stove synthesis. 1. Chemical composition, microhardness and compactibility of powders
von: O. K. Radchenko, et al.
Veröffentlicht: (2014)

Research on the structure and properties of high temperature and high pressure composite PCBN tool materials
von: Mo Peicheng, et al.
Veröffentlicht: (2023)

High-pressure reorganization of the fractal pore structure in detonation nanodiamond powders
von: L. A. Bulavin, et al.
Veröffentlicht: (2021)

High-pressure reorganization of the fractal pore structure in detonation nanodiamond powders
von: L. A. Bulavin, et al.
Veröffentlicht: (2021)

Corrosion resistance of the composite material Cu—Cr, obtained by evaporation in high vacuum
von: V. H. Hrechaniuk, et al.
Veröffentlicht: (2014)

Modern powder composite materials for switching and welding equipment
von: V. H. Zatovskyi, et al.
Veröffentlicht: (2018)

Electrochemical Synthesis of Composite Materials Based on the Nanoscale Powders of Tungsten Carbides in Salt Melt
von: I. A. Novosjolova, et al.
Veröffentlicht: (2014)

Pulse Plasma-Chemical Synthesis of Nanodispersed Iron-Based Powders, Their Phase Composition, and Magnetic Properties
von: A. E. Perekos, et al.
Veröffentlicht: (2013)

Modern composite materials for switching and welding equipment. information 1. powdered composite materials
von: E. V. Khomenko, et al.
Veröffentlicht: (2015)

Structure–phase state, electrophysical and magnetoresistance properties of solid solutions in film systems based on Co and Cu or Ag, and Fe and Cr or Cu
von: D. M. Kondrakhova, et al.
Veröffentlicht: (2012)

The formal definition of the degree of conversion of solid material, depending on the composition of the initial gas phase
von: V. S. Zenkov
Veröffentlicht: (2011)

The main direction for production of powder aluminium composite materials
von: Yu. O. Shyshkina
Veröffentlicht: (2018)

Formation of multicomponent solid solutions in cBN—TiC— VN —Al system at high pressure composite sintering
von: N. M. Belyavina, et al.
Veröffentlicht: (2024)

Transformations during liquid-phase sintering of high-speed alloy powders
von: O. V. Movchan, et al.
Veröffentlicht: (2019)

Icrease of strength of the composites based on diamond during the sintering of them in terms of the high pressure
von: N. O. Rusinova
Veröffentlicht: (2017)

Resistance of graphite materials under high pressure and high temterature
von: O. V. Savitskyi, et al.
Veröffentlicht: (2019)

On increasing the toughness of material for high pressure cylinders
von: E. F. Garf, et al.
Veröffentlicht: (2012)

Tribology of Fe–Cu-Ni-Sn and Fe-Cu–Ni-Sn–VN composites obtained by powder metallurgy methods
von: V. A. Mechnik, et al.
Veröffentlicht: (2019)

Joinability of Particulate Reinforced Alumix 231 Based Composite Materials Produced by Powder Metallurgy Route
von: H. Ates, et al.
Veröffentlicht: (2014)

Preparation of nanosized powders of solid solutions based on molybdenum disilicide for the manufacture of targets
von: I. V. Kud, et al.
Veröffentlicht: (2018)

The influence of chromium on the phase composition and peculiarities of strengthening of high-entrophy MnFeCoNiCu alloy
von: O. M. Myslyvchenko, et al.
Veröffentlicht: (2020)

Attenuation of microwave radiation at 34.09–34.19 GHz in a composite material based on diamond micron powder structured by a nanocarbon binder vapor-deposited at subatmospheric pressure
von: V. I. Chasnyk, et al.
Veröffentlicht: (2017)

Influence of copper additives and copper-titanium alloy for consolidation diamond powder when sintered under high pressure and high temperature
von: E. M. Lutsak, et al.
Veröffentlicht: (2017)

Phase and structural evolution during mechanical alloying, subsequent annealing and pressure sintering of AlCuNiFeCr high entropy alloy
von: O. I. Yurkova, et al.
Veröffentlicht: (2015)

Properties of permanent magnets of the Nd-Fe-B system alloyed with Cu, Ti, C, which are obtained by a powder method or sintering of films in high-pressure conditions
von: G. P. Brekharja, et al.
Veröffentlicht: (2014)

The influence of the durable interactionof SmCo5-based alloy with low-pressure hydrogen on the phase composition
von: I. I. Bulyk, et al.
Veröffentlicht: (2012)

Effect of high pressure and temperature on phase transformations of multilayer graphene
von: A. A. Shulzhenko, et al.
Veröffentlicht: (2016)

Phase transformations in Fe-Mg-C system at high pressures
von: T. V. Kovalenko, et al.
Veröffentlicht: (2016)

Change of the Phase-Structural State of SmCo5-Based Alloy During Solid-HDDR under Low Hydrogen Pressure
von: I. I. Bulyk, et al.
Veröffentlicht: (2015)

Discrete models of plastic deformation of solids under effect of high hydrostatic pressure
von: Yu. Kozak
Veröffentlicht: (2016)

Structure and phase composition of high-entropy AlCuNiFeTi alloy resulted from mechanical alloying
von: O. I. Yurkova, et al.
Veröffentlicht: (2014)

Phase composition of metals electrocrystallized on solid and liquid metal cathodes of the same chemical composition
von: O. B. Hirin, et al.
Veröffentlicht: (2017)

Composite material based on porous titanium, produced by vapour-phase deposition
von: L. A. Krushinskaja, et al.
Veröffentlicht: (2019)