Diffusion chromoaluminizing 12X18H10T steel with a pre-formed layer of titanium nitride
Збережено в:
| Дата: | 2011 |
|---|---|
| Автори: | M. V. Arshuk, V. H. Khyzhniak, M. V. Karpets |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2011
|
| Назва видання: | Metal Science and Treatment of Metals |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000431660 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Heat resistance steel titanoalitirovannoy 12X18H10T
за авторством: M. V. Arshuk, та інші
Опубліковано: (2012)
за авторством: M. V. Arshuk, та інші
Опубліковано: (2012)
Influence of TiN coating on titanium and aluminum saturation steel 12X18H10T
за авторством: V. H. Khyzhniak, та інші
Опубліковано: (2011)
за авторством: V. H. Khyzhniak, та інші
Опубліковано: (2011)
Titanium-aluminide coatings on steel 12Kh18N10T with a barrier layer of titanium nitride
за авторством: M. V. Arshuk, та інші
Опубліковано: (2011)
за авторством: M. V. Arshuk, та інші
Опубліковано: (2011)
The influence of cyclic processing on phase composition of ion-nitrided surface layersof 12X18H10T steel
за авторством: Z. A. Duriahina, та інші
Опубліковано: (2012)
за авторством: Z. A. Duriahina, та інші
Опубліковано: (2012)
Diffusion vacuum welding of intemetallic alloy γ-TiAl with steel 12Kh18N10T
за авторством: G. K. Kharchenko, та інші
Опубліковано: (2012)
за авторством: G. K. Kharchenko, та інші
Опубліковано: (2012)
Titanium and vanadium in steels for nitriding
за авторством: O. V. Bilotskyi, та інші
Опубліковано: (2013)
за авторством: O. V. Bilotskyi, та інші
Опубліковано: (2013)
Influence of laser alloying modes to the wear resistance parameters of 12H18N10T steel surface layer
за авторством: Z. A. Duriahina, та інші
Опубліковано: (2013)
за авторством: Z. A. Duriahina, та інші
Опубліковано: (2013)
Influence of 12Kh18N10T steel fibers beam pressing on their structures and properties
за авторством: V. A. Zorin, та інші
Опубліковано: (2014)
за авторством: V. A. Zorin, та інші
Опубліковано: (2014)
The Formation of Nanoscale Coating on the 12Cr18Ni10Ti Steel During Ion Implantation
за авторством: V. A. Zazhigalov, та інші
Опубліковано: (2014)
за авторством: V. A. Zazhigalov, та інші
Опубліковано: (2014)
Corrosion-fatigue strength of T-joints of steel 12Kh18N10T and methods of its improvement
за авторством: E. V. Kolomijtsev
Опубліковано: (2012)
за авторством: E. V. Kolomijtsev
Опубліковано: (2012)
Investigation of deformational impact on 08Kh18N9 and 12Kh18N10T steels in welded vessels and pipes
за авторством: L. M. Lobanov, та інші
Опубліковано: (2015)
за авторством: L. M. Lobanov, та інші
Опубліковано: (2015)
Formation of plastic properties of 12Cr18Ni10Ti steel highly irradiated by neutrons
за авторством: Maksimkin, О.P., та інші
Опубліковано: (2021)
за авторством: Maksimkin, О.P., та інші
Опубліковано: (2021)
Исследования захвата дейтерия в нержавеющих сталях 06Х18Н10, 08Х18Н10Т и 12Х18Н10Т
за авторством: Карпов, С.А., та інші
Опубліковано: (2005)
за авторством: Карпов, С.А., та інші
Опубліковано: (2005)
Heat tolerance of titanium boride and titanium nitride contacts to gallium arsenide
за авторством: Venger, Ye.F., та інші
Опубліковано: (1999)
за авторством: Venger, Ye.F., та інші
Опубліковано: (1999)
Nitriding, oxidation and carburization of titanium and steels in non-self maintained gaseous discharge
за авторством: Timoshenko, A.I., та інші
Опубліковано: (2012)
за авторством: Timoshenko, A.I., та інші
Опубліковано: (2012)
Influence of different types of hydrogen treatment on hydrogen retention and release from 12Kh18N10T steel
за авторством: Bondarenko, M.N., та інші
Опубліковано: (2018)
за авторством: Bondarenko, M.N., та інші
Опубліковано: (2018)
On the features of the process of deposition of ion-plasma coatings based on titanium nitride in the range of nitrogen pressures of 2-10 Pa
за авторством: V. M. Khoroshikh, та інші
Опубліковано: (2009)
за авторством: V. M. Khoroshikh, та інші
Опубліковано: (2009)
Influence of degree of ammonia dissociation on nitriding of stainless steels
за авторством: V. H. Khyzhniak, та інші
Опубліковано: (2009)
за авторством: V. H. Khyzhniak, та інші
Опубліковано: (2009)
Structure and properties of diffusion coatings of aluminium, chromium and nickel on the BT6 titanium alloy
за авторством: Ya. Smokovych, та інші
Опубліковано: (2013)
за авторством: Ya. Smokovych, та інші
Опубліковано: (2013)
Kinetic peculiarities of (α+β)-titanium alloys nitriding
за авторством: Ya. S. Matychak, та інші
Опубліковано: (2010)
за авторством: Ya. S. Matychak, та інші
Опубліковано: (2010)
The influence of water environment on weld metal gas saturation in underwater welding of 12Kh18N10T steel
за авторством: Yu. Kakhovskyi
Опубліковано: (2015)
за авторством: Yu. Kakhovskyi
Опубліковано: (2015)
The influence of ion nitriding modes on fretting-fatigue of 40X steel
за авторством: P. V. Kaplun, та інші
Опубліковано: (2018)
за авторством: P. V. Kaplun, та інші
Опубліковано: (2018)
The elastic–plastic transition during nanoindentation of titanium nitride
за авторством: S. N. Dub, та інші
Опубліковано: (2018)
за авторством: S. N. Dub, та інші
Опубліковано: (2018)
The influence of initial structure on VT22 titanium alloy nitriding
за авторством: O. H. Lukianenko, та інші
Опубліковано: (2019)
за авторством: O. H. Lukianenko, та інші
Опубліковано: (2019)
Application of ultrafine nickel powder for diffusion joining of titanium to stainless steel
за авторством: A. V. Ljushinskij
Опубліковано: (2019)
за авторством: A. V. Ljushinskij
Опубліковано: (2019)
The influence of preliminary plastic deformation of 12Kh18N12T steel on its mechanical characteristics
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2011)
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2011)
Kinetic peculiarities of titanium nitriding caused by phase-structural transformations
за авторством: Ya. S. Matychak
Опубліковано: (2012)
за авторством: Ya. S. Matychak
Опубліковано: (2012)
The influence of thermal resistance of lubricating-cooling liquids on 12Kh18AH18Sh steel machining
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2016)
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2016)
Electroslag processing of Kh18N10T stainless steel shavings
за авторством: O. V. Veretilnyk, та інші
Опубліковано: (2024)
за авторством: O. V. Veretilnyk, та інші
Опубліковано: (2024)
Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
за авторством: Belous, V.A., та інші
Опубліковано: (2021)
за авторством: Belous, V.A., та інші
Опубліковано: (2021)
Investigation of acoustic emission characteristics of 12Kh18N10T steel at the temperature of 560° C. Information 2. Damageability and fracture prediction
за авторством: Ja. Nedoseka, та інші
Опубліковано: (2014)
за авторством: Ja. Nedoseka, та інші
Опубліковано: (2014)
Investigation of joints of titanium aluminide with titanium alloy VTV, made by diffusion bonding
за авторством: V. F. Gorban, та інші
Опубліковано: (2009)
за авторством: V. F. Gorban, та інші
Опубліковано: (2009)
Diffusion of Nitrogen and Phase—Structural Transformations in Titanium
за авторством: Tkachuk, O., та інші
Опубліковано: (2014)
за авторством: Tkachuk, O., та інші
Опубліковано: (2014)
Diffusion of Nitrogen and Phase—Structural Transformations in Titanium
за авторством: O. Tkachuk, та інші
Опубліковано: (2014)
за авторством: O. Tkachuk, та інші
Опубліковано: (2014)
Helium release from 12Cr18Ni10Ti stainless steel after impact of steady-state glow discharge helium plasma
за авторством: Glazunov, G.P., та інші
Опубліковано: (2021)
за авторством: Glazunov, G.P., та інші
Опубліковано: (2021)
Investigation of acoustic-emission characteristics of steel 12Kh18N10T at the temperature of 560 oC. Information 1. Methods and some results
за авторством: Ja. Nedoseka, та інші
Опубліковано: (2011)
за авторством: Ja. Nedoseka, та інші
Опубліковано: (2011)
Welded structures of austenite steel of 10Kh18N10T type under conditions of radiation-induced swelling
за авторством: V. I. Makhnenko, та інші
Опубліковано: (2012)
за авторством: V. I. Makhnenko, та інші
Опубліковано: (2012)
Титаноалюминидные покрытия на стали 12Х18Н10Т с барьерным слоем нитрида титана
за авторством: Аршук, М.В., та інші
Опубліковано: (2011)
за авторством: Аршук, М.В., та інші
Опубліковано: (2011)
The influence of chemical heat treatment in checked gas environments on heat-resistance of 12Kh18AH18Sh steel
за авторством: V. M. Fedirko, та інші
Опубліковано: (2016)
за авторством: V. M. Fedirko, та інші
Опубліковано: (2016)
tructure and mechanical properties of vacuum-arc multilayer condensates of nitrides of titanium and its alloys
за авторством: A. V. Demchishin, та інші
Опубліковано: (2014)
за авторством: A. V. Demchishin, та інші
Опубліковано: (2014)
Схожі ресурси
-
Heat resistance steel titanoalitirovannoy 12X18H10T
за авторством: M. V. Arshuk, та інші
Опубліковано: (2012) -
Influence of TiN coating on titanium and aluminum saturation steel 12X18H10T
за авторством: V. H. Khyzhniak, та інші
Опубліковано: (2011) -
Titanium-aluminide coatings on steel 12Kh18N10T with a barrier layer of titanium nitride
за авторством: M. V. Arshuk, та інші
Опубліковано: (2011) -
The influence of cyclic processing on phase composition of ion-nitrided surface layersof 12X18H10T steel
за авторством: Z. A. Duriahina, та інші
Опубліковано: (2012) -
Diffusion vacuum welding of intemetallic alloy γ-TiAl with steel 12Kh18N10T
за авторством: G. K. Kharchenko, та інші
Опубліковано: (2012)