Cover Image

Current trends of designing the molding boxes for lost foam process

Saved in:

Bibliographic Details
Date:	2011
Main Authors:	V. S. Doroshenko, Kh. Berdyev
Format:	Article
Language:	English
Published:	2011
Series:	Metal and casting of Ukraine
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000435243
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Molding the Reaction Chamber for Inmold Modification of High-Strength Cast Iron During Lost Foam Casting Process
by: V. S. Doroshenko
Published: (2016)

Thermophysical model of lost foam casting using aerodynamic movement of molding material in container
by: P. B. Kaljuzhnyj
Published: (2018)

Exothermic heating profits in lost foam casting
by: N. I. Burovskij, et al.
Published: (2014)

The Influence of Technological Parameters of the Lost Foam Casting Process on the Microstructure of Cast Iron Modified by Disperse Ferrosilicon in the Mold Cavity
by: I. A. Nebozhak, et al.
Published: (2020)

Communicating tunnel autoclave for production of castings patterns of foam plastics
by: Kh. Berdyev, et al.
Published: (2009)

On the receipt of Austempering cast iron from cast state at Lost Foam Casting Process
by: V. S. Doroshenko
Published: (2017)

Casting reinforcement by lost-foam casting technology
by: P. B. Kaliuzhnyi, et al.
Published: (2017)

The concept of a rotor-conveyor complex for Lost Foam Casting process and heat treatment of metal castings
by: V. S. Doroshenko
Published: (2019)

Betterment of technology of polystyrene model manufacture for lost foam process with a thermocutter
by: L. A. Dan, et al.
Published: (2012)

Intensification of solidification processes for large iron-carbon alloy castings during Lost-foam process
by: I. A. Shalevskaja, et al.
Published: (2015)

Development of Optimal Technological Modes for Production of Composite Materials by Lost Foam Casting Process
by: O. A. Shcheretskyi, et al.
Published: (2020)

Influence of lost foam casting technological parameters on efficiency of grey cast iron graphitizing modifying in a mold &quot;cavity&quot;
by: I. A. Nebozhak, et al.
Published: (2016)

Using Computer Simulation to Identify Defects Formation in Steel Castings of Shut-off Valves Casted with Lost Foam Process
by: I. A. Shalevska, et al.
Published: (2021)

Molding processes using thermal treatment polystyrene
by: O. A. Tikhonova, et al.
Published: (2014)

Examples of the calculation of technical and economic parameters of the lost patterns foundry processes
by: V. S. Doroshenko, et al.
Published: (2015)

Double Box Motive
by: Bloch, Spencer
Published: (2021)

3D molding of the working cavity of a casting mold from loose sand by vacuum pumping
by: V. S. Doroshenko
Published: (2022)

Spontaneous processes implemented under conditions of gradients of thermodynamic and physico-chemical characteristics in mold
by: V. S. Doroshenko
Published: (2016)

Creating a three-phase dispersion system by jet mixing in sand molding processes
by: V. S. Doroshenko
Published: (2015)

Investigation of the drying process of gypsum molds
by: I. A. Grimzin, et al.
Published: (2017)

Production on the ice patterns shell molds with hydrates
by: V. S. Doroshenko
Published: (2011)

Fractal embedded boxes of bifurcations
by: C. Mira
Published: (2024)

A construction of dual box
by: Ovsienko, Serge
Published: (2018)

Fractal embedded boxes of bifurcations
by: Mira, Christian, et al.
Published: (2024)

An improvement of the box-covering method for solving noisy image processing tasks
by: Терлецький, С. В., et al.
Published: (2025)

Application of chips in electroslag surfacing of dies in current-conducting mold
by: Ju. M. Kuskov, et al.
Published: (2019)

Sand forming processes using gradients of pressure, temperature and concentration of reagents in the sand molding mixture
by: O. I. Shinskij, et al.
Published: (2017)

Technological principles of creation of speed processes of casting in the vacuumized molds for rotor-conveyer complexes
by: V. S. Doroshenko, et al.
Published: (2018)

Design Improvement of Stuffing Box Seals of Centrifugal Pump Shafts, Based on the Study of the Sealing Mechanism Physical Model
by: Shevchenko, Serhii S.
Published: (2025)

Design Improvement of Stuffing Box Seals of Centrifugal Pump Shafts, Based on the Study of the Sealing Mechanism Physical Model
by: Shevchenko, Serhii S.
Published: (2025)

Design Improvement of Stuffing Box Seals of Centrifugal Pump Shafts, Based on the Study of the Sealing Mechanism Physical Model
by: S. S. Shevchenko
Published: (2020)

An algebraic version of the Strong Black Box
by: Göbel, R., et al.
Published: (2003)

The pouring out of dry sand from molds without dust
by: V. S. Doroshenko
Published: (2011)

Optimization of molding sands grain-Size composition for filtration moulding
by: V. S. Doroshenko
Published: (2015)

Following the steps of the lost flotilla
by: A. V. Kudymov
Published: (2011)

Processes of crystallization and solidification of castings in single-casting molds
by: V. V. Jasjukov, et al.
Published: (2018)

Loose disperse systems increase the Possibility of molding sand
by: V. S. Doroshenko, et al.
Published: (2014)

Special features of ductile iron casting into evacuated molds
by: V. S. Doroshenko, et al.
Published: (2015)

Self synchronizing of dynamic processes in a casting mold
by: A. A. Bondar, et al.
Published: (2013)

In Search of the Lost Piastre (Essay)
by: I. Raef
Published: (2021)