Buchumschlag

Effect of Intensive mixing of the melt on the hydrodynamics of liquid metal into the mold continuous casting machine

Gespeichert in:

Bibliographische Detailangaben
Datum:	2011
Hauptverfasser:	N. I. Tarasevich, I. V. Korniets, I. N. Tarasevich
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2011
Schriftenreihe:	Metal and casting of Ukraine
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000437752
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Synchronous Magnetoelectrical Stirrer of Liquid Metal in the Mold of Continuous Casting Machine the Steel
von: I. P. Kondratenko, et al.
Veröffentlicht: (2014)

Electromagnetic power of magnetic system stirrer liquid metal in the mold of continuous casting machine
von: T. V. Vishtak, et al.
Veröffentlicht: (2013)

Influence of heat transfer intensity in secondary cooling zone on continuous cast ingot forming
von: I. V. Korniets, et al.
Veröffentlicht: (2014)

Physical modeling of the asymmetric flow of the metal in the mold slab of continuous casting machine
von: A. P. Verzilov
Veröffentlicht: (2019)

Selection of the optimum conditions of heatremoval with the lateralsurface of the billet continuous casting in secondary coolingzone
von: N. I. Tarasevich, et al.
Veröffentlicht: (2014)

Ways to Intensify Heat Exchange Processes in the Mold of a Continuous Casting Machine
von: A. S. Nuradinov, et al.
Veröffentlicht: (2019)

The analysis of heat removal intensity on the metal-crystallizer border effect on solid metal thickness in output from water-cooled twin-roll crystallizer is made
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)

Strain state continuous ingot liquid core in the curved continuous casting machine
von: V. M. Poleshchuk, et al.
Veröffentlicht: (2015)

Steel strip solidification in twin-roll casting unit
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)

Prediction of solidification parameters for twin-roll thin strip casting
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)

Pecularities of filling a mold for large steel casting in a storied gating system with a direct gate
von: A. V. Dudchenko, et al.
Veröffentlicht: (2013)

Pecularities of filling a mold for large steel casting in a storied gating system with a return riser
von: A. V. Dudchenko, et al.
Veröffentlicht: (2013)

Power of Synchronous Electromagnetic Stirrer of Liquid Metal in the Mold
von: T. V. Vishtak, et al.
Veröffentlicht: (2015)

Advice on saving metal for casting ductile cast iron in sand molds
von: V. S. Doroshenko
Veröffentlicht: (2016)

The impact of vibrating and gas-impulsive Treatment of solidifying metal on hydrodynamic processes of formation of Continuous-Cast billets
von: A. S. Nuradinov, et al.
Veröffentlicht: (2014)

Computer-integrated simulation of metal casting process in a metal mold for casting pistons
von: G. G. Idris, et al.
Veröffentlicht: (2016)

The influence of blowing on hydrodynamics of metal in the casting ladle
von: M. K. Siharov, et al.
Veröffentlicht: (2016)

Obtaining of combined hardening coatings of copper molds of mashines for continuous-casting of billets
von: Paustovsky, A.V., et al.
Veröffentlicht: (2019)

Rotational Speed of Liquid Metal in the Mold with Synchronous Electromagnetic Stirrer
von: T. V. Vishtak, et al.
Veröffentlicht: (2014)

Numerical modelling of hydrodynamic and thermal processes at continuous twin-roll steel casting.
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2015)

Processes of crystallization and solidification of castings in single-casting molds
von: V. V. Jasjukov, et al.
Veröffentlicht: (2018)

Induction melting in sectional mold
von: B. E. Paton, et al.
Veröffentlicht: (2019)

The microinhomogeneity metal melt and optimal temperature of pouring steel into molds
von: A. M. Skrebtsov, et al.
Veröffentlicht: (2017)

Continuous casting machine of DMZ – an important historical event in development of the continuous casting process
von: D. A. Djudkin
Veröffentlicht: (2011)

Modern methods of organizing directionsstreams in the tundish continuous casting machine
von: A. N. Smirnov, et al.
Veröffentlicht: (2017)

Method of Optimization Thermal Operating of the Mould in Continuous Casting Machine
von: A. S. Nuradinov, et al.
Veröffentlicht: (2016)

Origin of the Molds for Casting Scythian Arrowheads
von: Ya. Olhovskyi
Veröffentlicht: (2016)

Comparative analysis various ways to feed-in metal for high-speed casting
von: A. V. Dudchenko, et al.
Veröffentlicht: (2014)

Self synchronizing of dynamic processes in a casting mold
von: A. A. Bondar, et al.
Veröffentlicht: (2013)

Effect of mold temperature on the structure and properties of castings of a titanium alloy VT6, obtained by electron-beam melting
von: M. M. Voron, et al.
Veröffentlicht: (2018)

Production of Iron Castings with Gradient Structure for Special Purpose Equipment by In-Mold Modification of One Base Melt
von: D. V. Smernytskyi, et al.
Veröffentlicht: (2022)

Resource-Saving Continuous Optical Control of Liquid Metal Temperature in Metallurgy of Energy Machine Building
von: Zhukov, Leonid, et al.
Veröffentlicht: (2023)

Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets
von: A. P. Gopkalo, et al.
Veröffentlicht: (2015)

Method for measuring heat and mass Transfer processes formation in the mold cast billets caster, cast with electromagnetic stirring metal in the crystallizer
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2014)

Department of Mathematical Methods of Research and Informational and Computer Technologies is Part of PTIMA NAS of Ukraine During 35 Years
von: N. I. Tarasevich, et al.
Veröffentlicht: (2018)

Calculation of penetration zone dimensions in surfacing of rolls of machines for continuous casting of billets
von: V. N. Matvienko, et al.
Veröffentlicht: (2018)

Dissolution kinetics of Polystyrene models for the method of casting in shell molds
von: O. I. Shinskij, et al.
Veröffentlicht: (2014)

The low-temperature refrigerating complex for freezing of casting molds and cores
von: O. I. Shinskij, et al.
Veröffentlicht: (2016)

Features of Structure Formation and Mechanical Properties of Ductile Cast Iron in Castings Obtained by Casting in Shell Molds Using &quot;In-mold&quot; Process
von: V. B. Bublikov, et al.
Veröffentlicht: (2019)

Estimation of the influence of remelting on the resistance of die-casting molds inserts
von: O. I. Voronova, et al.
Veröffentlicht: (2018)