Cover Image

Effect of Intensive mixing of the melt on the hydrodynamics of liquid metal into the mold continuous casting machine

Saved in:

Bibliographic Details
Date:	2011
Main Authors:	N. I. Tarasevich, I. V. Korniets, I. N. Tarasevich
Format:	Article
Language:	English
Published:	2011
Series:	Metal and casting of Ukraine
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000437752
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Synchronous Magnetoelectrical Stirrer of Liquid Metal in the Mold of Continuous Casting Machine the Steel
by: I. P. Kondratenko, et al.
Published: (2014)

Electromagnetic power of magnetic system stirrer liquid metal in the mold of continuous casting machine
by: T. V. Vishtak, et al.
Published: (2013)

Influence of heat transfer intensity in secondary cooling zone on continuous cast ingot forming
by: I. V. Korniets, et al.
Published: (2014)

Physical modeling of the asymmetric flow of the metal in the mold slab of continuous casting machine
by: A. P. Verzilov
Published: (2019)

Selection of the optimum conditions of heatremoval with the lateralsurface of the billet continuous casting in secondary coolingzone
by: N. I. Tarasevich, et al.
Published: (2014)

Ways to Intensify Heat Exchange Processes in the Mold of a Continuous Casting Machine
by: A. S. Nuradinov, et al.
Published: (2019)

The analysis of heat removal intensity on the metal-crystallizer border effect on solid metal thickness in output from water-cooled twin-roll crystallizer is made
by: N. I. Tarasevich, et al.
Published: (2016)

Strain state continuous ingot liquid core in the curved continuous casting machine
by: V. M. Poleshchuk, et al.
Published: (2015)

Steel strip solidification in twin-roll casting unit
by: N. I. Tarasevich, et al.
Published: (2016)

Prediction of solidification parameters for twin-roll thin strip casting
by: N. I. Tarasevich, et al.
Published: (2016)

Pecularities of filling a mold for large steel casting in a storied gating system with a direct gate
by: A. V. Dudchenko, et al.
Published: (2013)

Pecularities of filling a mold for large steel casting in a storied gating system with a return riser
by: A. V. Dudchenko, et al.
Published: (2013)

Power of Synchronous Electromagnetic Stirrer of Liquid Metal in the Mold
by: T. V. Vishtak, et al.
Published: (2015)

Advice on saving metal for casting ductile cast iron in sand molds
by: V. S. Doroshenko
Published: (2016)

The impact of vibrating and gas-impulsive Treatment of solidifying metal on hydrodynamic processes of formation of Continuous-Cast billets
by: A. S. Nuradinov, et al.
Published: (2014)

Computer-integrated simulation of metal casting process in a metal mold for casting pistons
by: G. G. Idris, et al.
Published: (2016)

The influence of blowing on hydrodynamics of metal in the casting ladle
by: M. K. Siharov, et al.
Published: (2016)

Obtaining of combined hardening coatings of copper molds of mashines for continuous-casting of billets
by: Paustovsky, A.V., et al.
Published: (2019)

Rotational Speed of Liquid Metal in the Mold with Synchronous Electromagnetic Stirrer
by: T. V. Vishtak, et al.
Published: (2014)

Numerical modelling of hydrodynamic and thermal processes at continuous twin-roll steel casting.
by: A. V. Nogovitsyn, et al.
Published: (2015)

Processes of crystallization and solidification of castings in single-casting molds
by: V. V. Jasjukov, et al.
Published: (2018)

Induction melting in sectional mold
by: B. E. Paton, et al.
Published: (2019)

The microinhomogeneity metal melt and optimal temperature of pouring steel into molds
by: A. M. Skrebtsov, et al.
Published: (2017)

Continuous casting machine of DMZ – an important historical event in development of the continuous casting process
by: D. A. Djudkin
Published: (2011)

Modern methods of organizing directionsstreams in the tundish continuous casting machine
by: A. N. Smirnov, et al.
Published: (2017)

Method of Optimization Thermal Operating of the Mould in Continuous Casting Machine
by: A. S. Nuradinov, et al.
Published: (2016)

Origin of the Molds for Casting Scythian Arrowheads
by: Ya. Olhovskyi
Published: (2016)

Comparative analysis various ways to feed-in metal for high-speed casting
by: A. V. Dudchenko, et al.
Published: (2014)

Self synchronizing of dynamic processes in a casting mold
by: A. A. Bondar, et al.
Published: (2013)

Effect of mold temperature on the structure and properties of castings of a titanium alloy VT6, obtained by electron-beam melting
by: M. M. Voron, et al.
Published: (2018)

Production of Iron Castings with Gradient Structure for Special Purpose Equipment by In-Mold Modification of One Base Melt
by: D. V. Smernytskyi, et al.
Published: (2022)

Resource-Saving Continuous Optical Control of Liquid Metal Temperature in Metallurgy of Energy Machine Building
by: Zhukov, Leonid, et al.
Published: (2023)

Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets
by: A. P. Gopkalo, et al.
Published: (2015)

Method for measuring heat and mass Transfer processes formation in the mold cast billets caster, cast with electromagnetic stirring metal in the crystallizer
by: A. V. Nogovitsyn, et al.
Published: (2014)

Department of Mathematical Methods of Research and Informational and Computer Technologies is Part of PTIMA NAS of Ukraine During 35 Years
by: N. I. Tarasevich, et al.
Published: (2018)

Calculation of penetration zone dimensions in surfacing of rolls of machines for continuous casting of billets
by: V. N. Matvienko, et al.
Published: (2018)

Dissolution kinetics of Polystyrene models for the method of casting in shell molds
by: O. I. Shinskij, et al.
Published: (2014)

The low-temperature refrigerating complex for freezing of casting molds and cores
by: O. I. Shinskij, et al.
Published: (2016)

Estimation of the influence of remelting on the resistance of die-casting molds inserts
by: O. I. Voronova, et al.
Published: (2018)

Features of Structure Formation and Mechanical Properties of Ductile Cast Iron in Castings Obtained by Casting in Shell Molds Using &quot;In-mold&quot; Process
by: V. B. Bublikov, et al.
Published: (2019)