Buchumschlag

Method of calculation the processes in tuyere for blowing a desulphurizer into the melt in a ladle

Gespeichert in:

Bibliographische Detailangaben
Datum:	2011
Hauptverfasser:	N. V. Kosolap, R. D. Kuzemko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2011
Schriftenreihe:	Metal and casting of Ukraine
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000437755
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The influence of heating of mist flow in a ladle lance on the impulse of gas suspension jet that flows into the melt. Report 2
von: N. V. Kosolap, et al.
Veröffentlicht: (2012)

Comparison of different technologies ladle desulphurization magnesium
von: A. F. Shevchenko, et al.
Veröffentlicht: (2015)

Development of the process of ladle desulphurization of cast iron by injection of granular magnesium
von: A. F. Shevchenko, et al.
Veröffentlicht: (2013)

Laboratory research process ladle desulphurization powder lime and granulated magnesium when applied to melt the low-voltage electrical potential
von: S. I. Semykin, et al.
Veröffentlicht: (2014)

The influence of blowing on hydrodynamics of metal in the casting ladle
von: M. K. Siharov, et al.
Veröffentlicht: (2016)

Features thermal gas-dynamic operation of the blast furnace tuyere zone by blowing into the furnace of pulverized coal and natural gas
von: A. L. Chajka, et al.
Veröffentlicht: (2015)

The research of iron desulphurization with refining mixture IRS-2 during tapping into 100-tonns ladles
von: B. P. Krikunov, et al.
Veröffentlicht: (2011)

Estimation of the amount of burnup of particles of pulverized coal in the tuyere hearth
von: V. V. Kalinchak, et al.
Veröffentlicht: (2013)

Features of Rotary Processing of Aluminum Melts in the Ladle in the Rheo-Thixocasting Processes
von: V. P. Holovachenko, et al.
Veröffentlicht: (2020)

Melting-pouring ladle with induction heating
von: V. A. Shapovalov, et al.
Veröffentlicht: (2010)

Testing equipment to simulate the thermal processing of the melt in the ladle furnace
von: V. P. Piptjuk, et al.
Veröffentlicht: (2015)

Preparing the equipment for physical modeling of processes in the melt treatment ladle
von: V. P. Piptjuk, et al.
Veröffentlicht: (2014)

Melting-pouring ladle with induction heating
von: V. O. Mushegjan
Veröffentlicht: (2010)

Regular character of pig iron desulphurization by granulated magnesium injection through two-nozzle lances into the ladles of medium sizes
von: A. F. Shevchenko, et al.
Veröffentlicht: (2017)

Extremely deep desulphurization of hot metal (0.001–0.002 % sulfur) and high productivity of blowing granular magnesium
von: A. F. Shevchenko, et al.
Veröffentlicht: (2018)

The development of the method of registration of the electrical potential on blast furnace tuyeres
von: V. I. Bolshakov, et al.
Veröffentlicht: (2013)

Numerical Study of Desulphurization Process by the Ammonium Semi-Dry Method
von: I. A. Volchyn, et al.
Veröffentlicht: (2015)

Problems of blowing pulverized coal into blast furnaces
von: V. N. Zakharchenko, et al.
Veröffentlicht: (2018)

Estimation of desulphurization process of metal in LF by bivariant mechanism
von: S. V. Zhuravljova, et al.
Veröffentlicht: (2015)

A new approach to solving the problem of directional formation of final melts during steel debugging at a ladle-furnace unit
von: D. M. Tohobytska, et al.
Veröffentlicht: (2021)

Numerical study of melt hydrodynamics in D.C. ladle-furnace unit
von: I. V. Krikent, et al.
Veröffentlicht: (2014)

The Researh of efficacy Removing non-metallies inclusions white inert gas is blowing on Metal in the industrial ladle with argon bubbles by Different Diameters
von: V. G. Efimova
Veröffentlicht: (2014)

Development of technology of melting and ladle treatment of steel using programming complex &quot;DesigningMelt&quot;
von: R. V. Sinjakov
Veröffentlicht: (2011)

Improving the construction of the garnissage tuyere and technology restoring the converter working space profile
von: E. N. Sigarev, et al.
Veröffentlicht: (2018)

The research of the gas-dispersed flow in a nozzle for the pulverized coal injection into a blast furnace
von: N. V. Kosolap, et al.
Veröffentlicht: (2013)

Thermodynamic analysis of reduction process of magnesium oxide for desulphurization of ferric-carbon smelts
von: L. S. Molchanov, et al.
Veröffentlicht: (2013)

Influence of some factors on melt mixing during treatment on AC ladle furnace of middle power
von: V. P. Piptjuk, et al.
Veröffentlicht: (2011)

Thermodynamic Evaluation of the Using of Carbonate Sorbents in Dry Methods of Flue Gas Desulphurization
von: V. V. Kolesnyk, et al.
Veröffentlicht: (2018)

Research interfacial interaction in the flow of injected pulverized coal through a nozzle
von: N. V. Kosolap, et al.
Veröffentlicht: (2013)

Technical and economic indices of different processes of external pig iron desulphurization comparative analysis
von: A. F. Shevchenko, et al.
Veröffentlicht: (2013)

Estimation of gas behaviour furing its desulphuration with magnesium
von: L. S. Molchanov, et al.
Veröffentlicht: (2016)

Physical-chemical peculiarities of steel melt degassing from hydrogen during ladle treatment in electrostatic field
von: N. I. Zakharov, et al.
Veröffentlicht: (2014)

Forecast of metal finishing duration in a ladle furnace
von: N. M. Perevorochaev
Veröffentlicht: (2011)

Investigation of structure, mechanical and thermophysical properties of electron beam modified welds on copper parts of tuyeres
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2021)

Specifics of weld metal desulphurization in flux-cored wire welding
von: V. N. Shlepakov, et al.
Veröffentlicht: (2009)

Providing safety and safe keeping of blast furnaces lining of at blow-out and blowing in
von: V. I. Bolshakov, et al.
Veröffentlicht: (2009)

Investigation of the effect of slag on mixing of a bucket bath at bottom blowing by a method of physical modeling
von: V. P. Piptiuk, et al.
Veröffentlicht: (2018)

Experience and current state of use of the multi-tiered tuyeres in the oxygen-converter craft-shops of Ukraine
von: P. O. Yushkevych
Veröffentlicht: (2020)

Direct observation of high-temperature areas of metal melt at oxygen converter blowing with low voltage application
von: S. I. Semykin, et al.
Veröffentlicht: (2021)

Research in a physical model with the top blowing of a gas-dynamic head and jet parameters at blowing of a liquid bath through an annular coaxial slit nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2018)