Buchumschlag

Continuous casting machine of DMZ – an important historical event in development of the continuous casting process

Gespeichert in:

Bibliographische Detailangaben
Datum:	2011
1. Verfasser:	D. A. Djudkin
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2011
Schriftenreihe:	Metal and casting of Ukraine
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000444301
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Strain state continuous ingot liquid core in the curved continuous casting machine
von: V. M. Poleshchuk, et al.
Veröffentlicht: (2015)

Quality assurance process for continuous casting
von: O. N. Khoroshilov, et al.
Veröffentlicht: (2013)

Quality assurance process for continuous casting
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Quality assurance process for continuous casting
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Modern methods of organizing directionsstreams in the tundish continuous casting machine
von: A. N. Smirnov, et al.
Veröffentlicht: (2017)

Ways to Intensify Heat Exchange Processes in the Mold of a Continuous Casting Machine
von: A. S. Nuradinov, et al.
Veröffentlicht: (2019)

Method of Optimization Thermal Operating of the Mould in Continuous Casting Machine
von: A. S. Nuradinov, et al.
Veröffentlicht: (2016)

Modeling of continuous casting by combined process of MCCB + ESR
von: L. B. Medovar, et al.
Veröffentlicht: (2017)

Physical modeling of the asymmetric flow of the metal in the mold slab of continuous casting machine
von: A. P. Verzilov
Veröffentlicht: (2019)

Synchronous Magnetoelectrical Stirrer of Liquid Metal in the Mold of Continuous Casting Machine the Steel
von: I. P. Kondratenko, et al.
Veröffentlicht: (2014)

Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets
von: A. P. Gopkalo, et al.
Veröffentlicht: (2015)

Calculation of penetration zone dimensions in surfacing of rolls of machines for continuous casting of billets
von: V. N. Matvienko, et al.
Veröffentlicht: (2018)

Mastering of rolled metal manufacture from continuous cast billet in conditions of section mills 250, 350 and 400 of OJSC &quot;DMZ&quot;
von: A. I. Berezhnoj, et al.
Veröffentlicht: (2011)

Causes of fracture and methods of hardening of copper plates of moulds of machines of continuous casting of billets
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2014)

The influence of vibration on the formation of bloom continuous casting
von: A. S. Nuradinov, et al.
Veröffentlicht: (2013)

Estimation of technological possibilities of the speed stabilization of casting by open jet on modern billet continuous casting machine (CCM). Report 2.
von: S. N. Pisarskij, et al.
Veröffentlicht: (2018)

Application of Electromagnetic Forces in Continuous Steel Casting
von: V. I. Dubodelov, et al.
Veröffentlicht: (2019)

Electromagnetic power of magnetic system stirrer liquid metal in the mold of continuous casting machine
von: T. V. Vishtak, et al.
Veröffentlicht: (2013)

Effect of Intensive mixing of the melt on the hydrodynamics of liquid metal into the mold continuous casting machine
von: N. I. Tarasevich, et al.
Veröffentlicht: (2011)

Dynamic cooling control continuous casting in transient modes of casting in the metallurgical micromills
von: A. N. Smirnov, et al.
Veröffentlicht: (2016)

Scheme of stressed-deformed condition of continuous-casted slab in technological casting lines
von: V. M. Poleshchuk, et al.
Veröffentlicht: (2018)

Technology of restoration repair of slab moulds of machines for continuous casting of billets by friction stir surfacing
von: Ju. N. Nikitjuk, et al.
Veröffentlicht: (2013)

Advanced technology for continuous casting of steel: opportunities and challenges
von: A. N. Smirnov
Veröffentlicht: (2014)

Numerical modelling of hydrodynamic and thermal processes at continuous twin-roll steel casting.
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2015)

Impact toughness of bimetallic specimens cut out from the rolls of continuous casting machines with welded layer
von: P. O. Marushchak, et al.
Veröffentlicht: (2012)

Influence of periodic oscillations and fluctuations of the metal level in the crystallizer on the continuous casting process
von: O. M. Smirnov, et al.
Veröffentlicht: (2018)

Physical modeling of the process of compression of continuously cast slabs and blooms during their crystallization
von: O. M. Smirnov, et al.
Veröffentlicht: (2017)

Formation of structure and mechanical properties of rounds of continuous casting steel
von: G. V. Levchenko, et al.
Veröffentlicht: (2011)

The method of processing and analysis of the images of a network of thermal fatigue cracks on the surface of work-pieces continuous casting machine roller
von: I. V. Konovalenko, et al.
Veröffentlicht: (2018)

Peculiar features of equipment for continuous production of centrifugal electroslag castings
von: S. V. Skripnik
Veröffentlicht: (2010)

The role of computer modelling in optimization of technological processes of steel continuous casting. Report 1
von: V. A. Belyj, et al.
Veröffentlicht: (2011)

The role of computer modelling in optimization of technological processes of steel continuous casting. Report 2
von: V. A. Belyj, et al.
Veröffentlicht: (2011)

Features of the Occurrence of Starting Fans in the Continuous Casting of Billets by Open Jet
von: A. N. Smirnov, et al.
Veröffentlicht: (2019)

Use of external physical influences to improve the technology of continuous casting of steel
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2018)

Modeling of conditions of formation oscillation marks on the surface of continuous casting ingot
von: A. N. Smirnov, et al.
Veröffentlicht: (2015)

Thermal stresses in two-layer rollers for continuous billet casting machines under variation of the base and cladding metals properties
von: A. P. Gopkalo, et al.
Veröffentlicht: (2011)

Features of structure formation of the tubular billets manufactured of the ingot and continuously casted
von: H. V. Levchenko, et al.
Veröffentlicht: (2011)

Increase in quality of continuously cast billet of low-carbon peritectic steel
von: T. V. Horiainova
Veröffentlicht: (2012)

Study of the processes of shaping the hollow billets from antifriction alloys by the centrifugal and continuous casting methods
von: O. M. Khoroshylov, et al.
Veröffentlicht: (2019)

Investigation of the unevenness of mechanical properties along the cross-section of continuously cast billets
von: D. H. Palamar, et al.
Veröffentlicht: (2018)