Cover Image

Continuous casting machine of DMZ – an important historical event in development of the continuous casting process

Saved in:

Bibliographic Details
Date:	2011
Main Author:	D. A. Djudkin
Format:	Article
Language:	English
Published:	2011
Series:	Metal and casting of Ukraine
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000444301
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Strain state continuous ingot liquid core in the curved continuous casting machine
by: V. M. Poleshchuk, et al.
Published: (2015)

Quality assurance process for continuous casting
by: O. N. Khoroshilov, et al.
Published: (2013)

Quality assurance process for continuous casting
by: Павлова, Анна Алексеевна, et al.
Published: (2014)

Quality assurance process for continuous casting
by: Павлова, Анна Алексеевна, et al.
Published: (2014)

Modern methods of organizing directionsstreams in the tundish continuous casting machine
by: A. N. Smirnov, et al.
Published: (2017)

Ways to Intensify Heat Exchange Processes in the Mold of a Continuous Casting Machine
by: A. S. Nuradinov, et al.
Published: (2019)

Method of Optimization Thermal Operating of the Mould in Continuous Casting Machine
by: A. S. Nuradinov, et al.
Published: (2016)

Modeling of continuous casting by combined process of MCCB + ESR
by: L. B. Medovar, et al.
Published: (2017)

Physical modeling of the asymmetric flow of the metal in the mold slab of continuous casting machine
by: A. P. Verzilov
Published: (2019)

Synchronous Magnetoelectrical Stirrer of Liquid Metal in the Mold of Continuous Casting Machine the Steel
by: I. P. Kondratenko, et al.
Published: (2014)

Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets
by: A. P. Gopkalo, et al.
Published: (2015)

Calculation of penetration zone dimensions in surfacing of rolls of machines for continuous casting of billets
by: V. N. Matvienko, et al.
Published: (2018)

Estimation of technological possibilities of the speed stabilization of casting by open jet on modern billet continuous casting machine (CCM). Report 2.
by: S. N. Pisarskij, et al.
Published: (2018)

Causes of fracture and methods of hardening of copper plates of moulds of machines of continuous casting of billets
by: V. G. Kozhemjakin, et al.
Published: (2014)

The influence of vibration on the formation of bloom continuous casting
by: A. S. Nuradinov, et al.
Published: (2013)

Mastering of rolled metal manufacture from continuous cast billet in conditions of section mills 250, 350 and 400 of OJSC &quot;DMZ&quot;
by: A. I. Berezhnoj, et al.
Published: (2011)

Application of Electromagnetic Forces in Continuous Steel Casting
by: V. I. Dubodelov, et al.
Published: (2019)

Electromagnetic power of magnetic system stirrer liquid metal in the mold of continuous casting machine
by: T. V. Vishtak, et al.
Published: (2013)

Effect of Intensive mixing of the melt on the hydrodynamics of liquid metal into the mold continuous casting machine
by: N. I. Tarasevich, et al.
Published: (2011)

Dynamic cooling control continuous casting in transient modes of casting in the metallurgical micromills
by: A. N. Smirnov, et al.
Published: (2016)

Scheme of stressed-deformed condition of continuous-casted slab in technological casting lines
by: V. M. Poleshchuk, et al.
Published: (2018)

Technology of restoration repair of slab moulds of machines for continuous casting of billets by friction stir surfacing
by: Ju. N. Nikitjuk, et al.
Published: (2013)

Numerical modelling of hydrodynamic and thermal processes at continuous twin-roll steel casting.
by: A. V. Nogovitsyn, et al.
Published: (2015)

Advanced technology for continuous casting of steel: opportunities and challenges
by: A. N. Smirnov
Published: (2014)

Impact toughness of bimetallic specimens cut out from the rolls of continuous casting machines with welded layer
by: P. O. Marushchak, et al.
Published: (2012)

Influence of periodic oscillations and fluctuations of the metal level in the crystallizer on the continuous casting process
by: O. M. Smirnov, et al.
Published: (2018)

Physical modeling of the process of compression of continuously cast slabs and blooms during their crystallization
by: O. M. Smirnov, et al.
Published: (2017)

The method of processing and analysis of the images of a network of thermal fatigue cracks on the surface of work-pieces continuous casting machine roller
by: I. V. Konovalenko, et al.
Published: (2018)

Formation of structure and mechanical properties of rounds of continuous casting steel
by: G. V. Levchenko, et al.
Published: (2011)

Overview of the Production of Casting Machines in the World and Examples of the Use of Robots in Casting Processes
by: V. A. Hnatush, et al.
Published: (2019)

The role of computer modelling in optimization of technological processes of steel continuous casting. Report 1
by: V. A. Belyj, et al.
Published: (2011)

The role of computer modelling in optimization of technological processes of steel continuous casting. Report 2
by: V. A. Belyj, et al.
Published: (2011)

Peculiar features of equipment for continuous production of centrifugal electroslag castings
by: S. V. Skripnik
Published: (2010)

Features of the Occurrence of Starting Fans in the Continuous Casting of Billets by Open Jet
by: A. N. Smirnov, et al.
Published: (2019)

Use of external physical influences to improve the technology of continuous casting of steel
by: A. V. Nogovitsyn, et al.
Published: (2018)

Modeling of conditions of formation oscillation marks on the surface of continuous casting ingot
by: A. N. Smirnov, et al.
Published: (2015)

Thermal stresses in two-layer rollers for continuous billet casting machines under variation of the base and cladding metals properties
by: A. P. Gopkalo, et al.
Published: (2011)

Features of structure formation of the tubular billets manufactured of the ingot and continuously casted
by: H. V. Levchenko, et al.
Published: (2011)

Increase in quality of continuously cast billet of low-carbon peritectic steel
by: T. V. Horiainova
Published: (2012)

Study of the processes of shaping the hollow billets from antifriction alloys by the centrifugal and continuous casting methods
by: Khoroshylov, O.M., et al.
Published: (2019)