Buchumschlag

Improvement of electric and technological modes of metal finishing in a ladle furnace

Gespeichert in:

Bibliographische Detailangaben
Datum:	2011
Hauptverfasser:	N. M. Perevorochaev, B. P. Krikunov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2011
Schriftenreihe:	Metal and casting of Ukraine
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000444303
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Forecast of metal finishing duration in a ladle furnace
von: N. M. Perevorochaev
Veröffentlicht: (2011)

Efficiency improving for gas removal from ladle furnace
von: S. N. Timoshenko, et al.
Veröffentlicht: (2015)

Technology of directed forming of cast metal internal structure
von: N. M. Perevorochaev, et al.
Veröffentlicht: (2011)

Stirring of liquid metal in ladle furnace by pulsing magnetic field
von: Ju. M. Gorislavets, et al.
Veröffentlicht: (2016)

Physicochemical prerequisites for the development of complex relationships between the properties of metallurgical melts in order to predict the regularities of the distribution of elements during the finishing of steel on a ladle furnace
von: I. R. Snihura, et al.
Veröffentlicht: (2020)

Testing equipment to simulate the thermal processing of the melt in the ladle furnace
von: V. P. Piptjuk, et al.
Veröffentlicht: (2015)

Analysis of technological development of finish metal product treatment
von: Postizhenko, V.K.
Veröffentlicht: (2008)

The influence of electromagnetic forces on mixing bath ladle furnace ac
von: V. P. Piptjuk, et al.
Veröffentlicht: (2014)

Investigation of effect of calcium fluoride on power-technological characteristics of wheel steel treatment in ladle-furnace installation
von: G. A. Esaulov, et al.
Veröffentlicht: (2014)

Numerical study of melt hydrodynamics in D.C. ladle-furnace unit
von: I. V. Krikent, et al.
Veröffentlicht: (2014)

Development of technology of ladle treatment of electric steel by using pegmatite as substitute for fluorspar
von: V. N. Kornievskij, et al.
Veröffentlicht: (2015)

Numerical modeling of high-current arc discharge in DC ladle-furnace unit
von: I. V. Krikent, et al.
Veröffentlicht: (2013)

The investigation of the influence of both accumulating and ladle pouring processes on the blast-furnace operation
von: V. A. Petrenko, et al.
Veröffentlicht: (2014)

RESEARCH OF ARC FURNACE ELECTRICAL MODE WITH A FUZZY CONTROL MODEL
von: Paranchuk, Y. S., et al.
Veröffentlicht: (2020)

The influence of blowing on hydrodynamics of metal in the casting ladle
von: M. K. Siharov, et al.
Veröffentlicht: (2016)

Features of mass transfer in bath of dc ladle furnace unit with capacity 140 tons
von: V. P. Piptjuk, et al.
Veröffentlicht: (2012)

Simulation of electric arc mode of electric furnace and analysis of its operation in real time
von: M. M. Gasik
Veröffentlicht: (2024)

Comparison of different technologies ladle desulphurization magnesium
von: A. F. Shevchenko, et al.
Veröffentlicht: (2015)

Influence of some factors on melt mixing during treatment on AC ladle furnace of middle power
von: V. P. Piptjuk, et al.
Veröffentlicht: (2011)

Use of Oxygen and Enriched Air in Heating Furnaces, Soaking Pits and Stands of Steel Casting Ladles Heating
von: I. N. Karp, et al.
Veröffentlicht: (2012)

Optimal stabilization mode coordinates electric arc furnace based on fuzzy controllers
von: Ya. S. Paranchuk, et al.
Veröffentlicht: (2014)

Determination of the rational profile of the lining of steel-teeming ladles to improve the removal efficiency of non-metallic inclusions
von: L. S. Molchanov, et al.
Veröffentlicht: (2018)

A new approach to solving the problem of directional formation of final melts during steel debugging at a ladle-furnace unit
von: D. M. Tohobytska, et al.
Veröffentlicht: (2021)

DEVELOPMENT OF METHODS AND MEANS OF COMPUTER SIMULATION FOR STUDYING ARC FURNACE ELECTRIC MODES
von: Lozynskyi, O. Y., et al.
Veröffentlicht: (2018)

The influence of the processing mode on the parameters of diamond finishing of ceramic balls made of boron carbide
von: S. V. Sokhan, et al.
Veröffentlicht: (2020)

Improvement of blast-furnace melting technology with coal-dust insufflations
von: M. A. Tomash, et al.
Veröffentlicht: (2013)

Modified nanocomposite materials for UV-technologies for products finishing printing by lamination
von: V. H. Sysiuk, et al.
Veröffentlicht: (2020)

Optimal control of the electrical mode of an arc furnace on the basis of the three-dimensional vector of phase currents
von: O. Lozynskyi, et al.
Veröffentlicht: (2019)

Improving efficiency of finishing natural stone using diamond–polymer fiber tools
von: V. D. Kurilovych, et al.
Veröffentlicht: (2014)

Rating refining slag properties generated by direct doping with manganese metal in the ladle
von: R. V. Sinjakov
Veröffentlicht: (2014)

Manufacturing deformed semi-finished zirconium alloy products from ingots, melted by the method of nonconsumable-electrode arc remelting in a skull furnace
von: Ye. Kapustian, et al.
Veröffentlicht: (2021)

. Development of technological regulations for the carburizing of cast iron in a 30-ton ladle. Part 1
von: V. P. Piptjuk, et al.
Veröffentlicht: (2019)

Blast furnace melting study by measuring of electric potentials that arising in volume of furnace
von: I. G. Muraveva, et al.
Veröffentlicht: (2013)

Melting-pouring ladle with induction heating
von: V. A. Shapovalov, et al.
Veröffentlicht: (2010)

Designing finishing materials with a gradient of electrophysical properties
von: Biruk, Yana
Veröffentlicht: (2022)

Designing finishing materials with a gradient of electrophysical properties
von: Y. Biruk
Veröffentlicht: (2022)

The research of iron desulphurization with refining mixture IRS-2 during tapping into 100-tonns ladles
von: B. P. Krikunov, et al.
Veröffentlicht: (2011)

Improvement of multifunctional electromagnetic systems for electrical technologies
von: I. V. Bozhko, et al.
Veröffentlicht: (2019)

The study of temperature fields in the thickness of the lining and the height of the ladle during drying and heating of the steel-teeming ladles with different lining
von: P. A. Plokhikh, et al.
Veröffentlicht: (2018)

MODELING PARAMETERS OF ARC OF ELECTRIC ARC FURNACE
von: Khrestin, R. N.
Veröffentlicht: (2015)