Buchumschlag

Choosing the operating condition and the design values of the device for extraction of thermal energy from waste oil and gas well

Gespeichert in:

Bibliographische Detailangaben
Datum:	2011
Hauptverfasser:	Ju. M. Matsevityj, A. I. Tsentsiper, V. N. Goloshchapov, A. O. Kostikov, A. I. Prikhodko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2011
Schriftenreihe:	Journal of mechanical engineering
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000542633
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Choosing the operating condition and the design values of the device for extraction of thermal energy from waste oil and gas well
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)

Choosing the operating condition and the design values of the device for extraction of thermal energy from waste oil and gas well
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)

Cyclic operation of the device of thermal energy extraction from the waste oil and gas wells
von: Buchko, A., et al.
Veröffentlicht: (2017)

Cyclic operation of the device of thermal energy extraction from the waste oil and gas wells
von: A. V. Buchko, et al.
Veröffentlicht: (2017)

Choosing the thermogas dynamic and design values of peak load turbine for high-temperature topping part of power unit K-300-24014
von: Ju. M. Matsevityj, et al.
Veröffentlicht: (2012)

Cement of oil and gas wells with using nanosystems
von: O. E. Bagirov, et al.
Veröffentlicht: (2017)

Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
von: A. A. Rudenko, et al.
Veröffentlicht: (2020)

Criterion for choosing multifactor experiment design for studying of complex processes
von: S. V. Tynyna, et al.
Veröffentlicht: (2017)

Vector of modern studies of electrometry of oil and gas wells
von: M. L. Myrontsov
Veröffentlicht: (2018)

Multi-Probe Hardware for Electrometry of Oil and Gas Wells
von: M. L. Myrontsov
Veröffentlicht: (2018)

Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
von: Rudenko, Andrii A., et al.
Veröffentlicht: (2020)

Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
von: Rudenko, Andrii A., et al.
Veröffentlicht: (2020)

ISM high-performance tools for drilling of oil and gas wells. Review
von: N. A. Bondarenko
Veröffentlicht: (2018)

Research of different types of ropes and choosing optimal for designs of rope-profile conductor
von: A. A. Rubel, et al.
Veröffentlicht: (2018)

Realization of signal converters of the thermal sensors and high-lnear analog devices of biomedical designation
von: S. V. Pavlov, et al.
Veröffentlicht: (2024)

Rent Formative Factors in the Field of Oil and Gas Extraction (by the Example of the Western Oil-and-Gas-Bearing Region of Ukraine)
von: Ya. S. Vytvytskyi
Veröffentlicht: (2008)

Choosing the thermogas dynamic and design values of peak load turbine for high-temperature topping part of power unit K-300-24014
von: Мацевитый, Юрий Михайлович, et al.
Veröffentlicht: (2012)

Choosing the thermogas dynamic and design values of peak load turbine for high-temperature topping part of power unit K-300-24014
von: Мацевитый, Юрий Михайлович, et al.
Veröffentlicht: (2012)

Experimental and theoretical study principle of the device interval standardized clean well
von: A. N. Davidenko, et al.
Veröffentlicht: (2016)

The synergistic effect of improving the control system of oil and gas extracting enterprises
von: V. Bekirova
Veröffentlicht: (2015)

Estimation of parameters of hydrogeomechanical influence of extraction works on emergency degasation well
von: I. A. Sadovenko, et al.
Veröffentlicht: (2019)

Designing of Device for Endoscopic Surgery In Experimental Animals
von: A. I. Grebenjuk, et al.
Veröffentlicht: (2016)

Time Frequency Method of Solving One Boundary Value Problem for a Hyperbolic System and Its Application to the Oil Extraction
von: F. A. Aliev, et al.
Veröffentlicht: (2016)

Improving safety of transportation, extraction and utilization of methane of surface decontaminating wells
von: K. K. Sofijskij, et al.
Veröffentlicht: (2016)

Analysis of a quantum well structure optical integrated device
von: Sh. M. Eladl, et al.
Veröffentlicht: (2017)

About the Feasibility of the Mobile Direct-Prospecting Technologies Application for the Sites of Wells for Oil and Gas Location
von: S. P. Levashov, et al.
Veröffentlicht: (2018)

The Combustion of Oil Refining Wastes in Rotary Kiln
von: A. A. Sobchenko, et al.
Veröffentlicht: (2012)

Modern system of organization management costs in oil and gas extracting companies of Azerbaijan
von: T. Polukhov
Veröffentlicht: (2012)

Determination of porosity of clay rocks in cased oil and gas wells using radioactive and acoustic logging
von: Bondarenko, M. S., et al.
Veröffentlicht: (2010)

Parametrical and functional identification of thermal processes
von: Ju. M. Matsevityj, et al.
Veröffentlicht: (2011)

Choosing of values for coefficient of dynamic interaction between cargo and roller carriage of the belt conveyer
von: V. F. Monastyrskij, et al.
Veröffentlicht: (2017)

Thermal management system for electronic devices
von: I. V. Tsevukh, et al.
Veröffentlicht: (2016)

Some peculiarities in design of devices for metal melt dispersion
von: V. A. Shapovalov, et al.
Veröffentlicht: (2009)

Predicting of oil-gas-water-saturation of rocks of different lithology and geodynamic genesis in open-casts of wells
von: L. V. Skakalska, et al.
Veröffentlicht: (2015)

Ground frequency spectrum device for treatment of drilling fluid in drilling wells
von: O. M. Davydenko, et al.
Veröffentlicht: (2016)

Waste Tires Thermolysis Oil-Fuel as Addition Agent to Oil Products
von: V. I. Kashkovskij
Veröffentlicht: (2011)

The experience of field operation of tubing with protective diffusion zinc coating in deep oil and gas wells in Ukraine
von: E. V. Proskurkin, et al.
Veröffentlicht: (2017)

Reclamation of Waste Oil Refining Materials in a Steam-Boiler of Oils and Fats Factories
von: A. A. Sobchenko, et al.
Veröffentlicht: (2012)

Choosing a Universal Air Collector Design for a Cylindrical-Shaped Hot-Wire Anemometer
von: Цаканян, О. С., et al.
Veröffentlicht: (2021)

Choosing a Universal Air Collector Design for a Cylindrical-Shaped Hot-Wire Anemometer
von: Цаканян, О. С., et al.
Veröffentlicht: (2021)