Determination of stress and strain concentrations in the elastic-plastic materials under bending and torsion
Gespeichert in:
| Datum: | 2011 |
|---|---|
| Hauptverfasser: | M. Kurek, T. Јagoda, P. Warmuzek |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2011
|
| Schriftenreihe: | Materials Science (Physicochemical mechanics of materials) |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000658234 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Determination of stress and strain concentrations in the elastic-plastic materials under bending and torsion
von: Kurek, M., et al.
Veröffentlicht: (2011)
von: Kurek, M., et al.
Veröffentlicht: (2011)
Comparison of fatigue characteristics for some selected structural materials under bending and torsion
von: M. Kurek, et al.
Veröffentlicht: (2011)
von: M. Kurek, et al.
Veröffentlicht: (2011)
Comparison of fatigue characteristics for some selected structural materials under bending and torsion
von: Kurek, М., et al.
Veröffentlicht: (2011)
von: Kurek, М., et al.
Veröffentlicht: (2011)
Stress concentration at the holes in an elastic plane under antiplane strain
von: M. P. Savruk, et al.
Veröffentlicht: (2012)
von: M. P. Savruk, et al.
Veröffentlicht: (2012)
Evolution of torsion and bending moments in a frame support profile due to its plastic deformation
von: V. V. Nazymko, et al.
Veröffentlicht: (2018)
von: V. V. Nazymko, et al.
Veröffentlicht: (2018)
Bending the Plate on Elastic Foundation with Initial Stresses under Action of Moving Load
von: Ju. Babich, et al.
Veröffentlicht: (2017)
von: Ju. Babich, et al.
Veröffentlicht: (2017)
Area and point approaches in fatigue life evaluation under combined bending and torsion loading
von: Karolczuk, A., et al.
Veröffentlicht: (2008)
von: Karolczuk, A., et al.
Veröffentlicht: (2008)
To Solving the Problems of Fatigue under Combined Loading by Static Torsion and Symmetric Cyclic Bending
von: V. N. Pelykh
Veröffentlicht: (2019)
von: V. N. Pelykh
Veröffentlicht: (2019)
Stress-Strain State of Steam Turbine Lock Joint under Plastic Deformation
von: Palkov, Ihor A., et al.
Veröffentlicht: (2021)
von: Palkov, Ihor A., et al.
Veröffentlicht: (2021)
Stress-Strain State of Steam Turbine Lock Joint under Plastic Deformation
von: Palkov, Ihor A., et al.
Veröffentlicht: (2021)
von: Palkov, Ihor A., et al.
Veröffentlicht: (2021)
Stress-Strain State of Steam Turbine Lock Joint Under Plastic Deformation
von: I. A. Palkov, et al.
Veröffentlicht: (2020)
von: I. A. Palkov, et al.
Veröffentlicht: (2020)
Determination of Parameters of Heredity Kernels of Nonlinearly Viscoelastic Isotropic Materials under Torsion
von: V. P. Golub, et al.
Veröffentlicht: (2015)
von: V. P. Golub, et al.
Veröffentlicht: (2015)
Fatigue crack growth in AlCu4Mg1 under nonproportional bending with torsion loading
von: Rozumek, D., et al.
Veröffentlicht: (2010)
von: Rozumek, D., et al.
Veröffentlicht: (2010)
Application of variational method of homogeneous solutions for determination of stress concentration on the boundary of dissimilar isotropic elastic materials. Plane problem
von: V. Chekurin, et al.
Veröffentlicht: (2013)
von: V. Chekurin, et al.
Veröffentlicht: (2013)
Refined model of thermo-elastic-plastic bending of layered plates of regular structure. I. Problem statement
von: A. P. Jankovskij
Veröffentlicht: (2018)
von: A. P. Jankovskij
Veröffentlicht: (2018)
Refined model of thermo-elastic-plastic bending of layered plates of regular structure. II. Modeling problems
von: A. P. Jankovskij
Veröffentlicht: (2018)
von: A. P. Jankovskij
Veröffentlicht: (2018)
Fatigue crack growth in AlCu4Mg1 under non-proportional bending with torsion loading
von: D. Rozumek, et al.
Veröffentlicht: (2010)
von: D. Rozumek, et al.
Veröffentlicht: (2010)
Application of plastic strain method to determine threshold concentrations for cryoprotective substances during Saccharomyces cerevisiae yeast cell cryopreservation
von: A. I. Osetskij, et al.
Veröffentlicht: (2007)
von: A. I. Osetskij, et al.
Veröffentlicht: (2007)
Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
von: Major, S., et al.
Veröffentlicht: (2008)
von: Major, S., et al.
Veröffentlicht: (2008)
On numerical realization of torsion and bending problems for prismatic bars with arbitrary cross-sections
von: Ju. Fialko, et al.
Veröffentlicht: (2012)
von: Ju. Fialko, et al.
Veröffentlicht: (2012)
Stress-Strain State in Bending of Cirsular Plate with System of Cracks with Allowance for Strip Contact of their Edges
von: M. S. Slobodian, et al.
Veröffentlicht: (2024)
von: M. S. Slobodian, et al.
Veröffentlicht: (2024)
Axially symmetric stresses in piecewise-homogeneous elastic-plastic ring
von: T. Soliar
Veröffentlicht: (2015)
von: T. Soliar
Veröffentlicht: (2015)
Development of Strength and Yield Criteria Based on the Relationship between Elastic and Plastic Strains
von: Y. Li
Veröffentlicht: (2014)
von: Y. Li
Veröffentlicht: (2014)
Development of Strength and Yield Criteria Based on the Relationship between Elastic and Plastic Strains
von: Li, Y.
Veröffentlicht: (2014)
von: Li, Y.
Veröffentlicht: (2014)
Effect of dislocations on the structural order parameter in a crystal under severe plastic deformation by torsion
von: Ju. D. Zavorotnev, et al.
Veröffentlicht: (2016)
von: Ju. D. Zavorotnev, et al.
Veröffentlicht: (2016)
Numerical Investigations of the Crack Resistance of Ion-Strengthened Sheet Glass Under Bending Strains
von: Гонтаровский, П. П., et al.
Veröffentlicht: (2021)
von: Гонтаровский, П. П., et al.
Veröffentlicht: (2021)
Numerical Investigations of the Crack Resistance of Ion-Strengthened Sheet Glass Under Bending Strains
von: Гонтаровский, П. П., et al.
Veröffentlicht: (2021)
von: Гонтаровский, П. П., et al.
Veröffentlicht: (2021)
Numerical Investigations of the Crack Resistance of Ion-Strengthened Sheet Glass Under Bending Strains
von: P. P. Hontarovskyi, et al.
Veröffentlicht: (2021)
von: P. P. Hontarovskyi, et al.
Veröffentlicht: (2021)
Plasticity of materials determined by the indentation method
von: Milman, Yu.V., et al.
Veröffentlicht: (2018)
von: Milman, Yu.V., et al.
Veröffentlicht: (2018)
Plasticity of materials determined by the indentation method
von: Yu. V. Milman, et al.
Veröffentlicht: (2018)
von: Yu. V. Milman, et al.
Veröffentlicht: (2018)
Stress distribution near rounded V-notches in an orthotropic elastic plane under antiplane strain
von: M. P. Savruk, et al.
Veröffentlicht: (2019)
von: M. P. Savruk, et al.
Veröffentlicht: (2019)
Determination of the stress-strain state in thin orthotropic plates resting on the elastic Vinkler's foundation
von: M. V. Deliavskyi, et al.
Veröffentlicht: (2014)
von: M. V. Deliavskyi, et al.
Veröffentlicht: (2014)
Torsion of an elastic space with axisymmetric narrow cavity
von: V. S. Kravets, et al.
Veröffentlicht: (2012)
von: V. S. Kravets, et al.
Veröffentlicht: (2012)
The influence of the stress-strain state on distribution of hydrogen concentration in the prefracture region.
von: V. V. Panasiuk, et al.
Veröffentlicht: (2014)
von: V. V. Panasiuk, et al.
Veröffentlicht: (2014)
Stress-Strain State of Ribbed Cylindrical Shell Interacting with Elastic Foundation under Short-Time Loads
von: Ju. V. Skosarenko
Veröffentlicht: (2015)
von: Ju. V. Skosarenko
Veröffentlicht: (2015)
Dynamic bending of plastic polymetallic plates with piecewise-smooth elliptical contours
von: Ju. V. Nemirovskij
Veröffentlicht: (2019)
von: Ju. V. Nemirovskij
Veröffentlicht: (2019)
Plastic deformation of materials under loading along piecewise smooth trajectories with areas of unloading by elastic law
von: Yu. Shvaiko
Veröffentlicht: (2015)
von: Yu. Shvaiko
Veröffentlicht: (2015)
Elastic torsional wave and corresponding nonlinear wave equation
von: Ya. Ya. Rushchytskyi
Veröffentlicht: (2022)
von: Ya. Ya. Rushchytskyi
Veröffentlicht: (2022)
One problem of torsion of piecewise homogeneous elastic bodies
von: Pylypiuk, T.M.
Veröffentlicht: (2014)
von: Pylypiuk, T.M.
Veröffentlicht: (2014)
Torsion of a truncated conical-layered elastic cone
von: N. D. Vaisfeld, et al.
Veröffentlicht: (2013)
von: N. D. Vaisfeld, et al.
Veröffentlicht: (2013)
Ähnliche Einträge
-
Determination of stress and strain concentrations in the elastic-plastic materials under bending and torsion
von: Kurek, M., et al.
Veröffentlicht: (2011) -
Comparison of fatigue characteristics for some selected structural materials under bending and torsion
von: M. Kurek, et al.
Veröffentlicht: (2011) -
Comparison of fatigue characteristics for some selected structural materials under bending and torsion
von: Kurek, М., et al.
Veröffentlicht: (2011) -
Stress concentration at the holes in an elastic plane under antiplane strain
von: M. P. Savruk, et al.
Veröffentlicht: (2012) -
Evolution of torsion and bending moments in a frame support profile due to its plastic deformation
von: V. V. Nazymko, et al.
Veröffentlicht: (2018)