Enhancement of the cooling ability of a cooling tower at the expense of increasing the cooling surface in the course of liquid atomization by centrifugal atomizers
We have carried out an investigation of the effect of geometrical sizes of centrifugal atomizers and the modes of water outflow on the disperse composition of atomized drops. The cooling surface of drops depending on their fractional composition has been evaluated. We have established the factors wi...
Saved in:
| Date: | 2006 |
|---|---|
| Main Authors: | Dubrovskyi V.V., Pidvysotskyi O.M., Bashtovyi A.I. |
| Format: | Article |
| Language: | Ukrainian |
| Published: |
General Energy Institute of the National Academy of Sciences of Ukraine
2006
|
| Subjects: | |
| Online Access: | https://systemre.org/index.php/journal/article/view/297 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | System Research in Energy |
Institution
System Research in EnergySimilar Items
Optimization of the cooling mode of circulating water in atomizing cooling towers
by: Shraiber O.A., et al.
Published: (2007)
by: Shraiber O.A., et al.
Published: (2007)
A study of the hydraulic characteristics of centrifugal atomizers of cooling towers and ways of their improvement
by: Dubrovskyi V.V., et al.
Published: (2008)
by: Dubrovskyi V.V., et al.
Published: (2008)
Enhancement of the operation efficiency of a cooling tower at the expense of regulation of the uniformity of distribution of atomized drops over the irrigation area
by: Dubrovskyi, et al.
Published: (2006)
by: Dubrovskyi, et al.
Published: (2006)
Experimental investigation of the liquid outflow process from centrifugal atomizers intended for cooling towers
by: Dubrovskyi V.V., et al.
Published: (2001)
by: Dubrovskyi V.V., et al.
Published: (2001)
Calculation of liquid cooling in film cooling towers with a profiled sprinkler surface
by: Dubrovskyi V.V.
Published: (2017)
by: Dubrovskyi V.V.
Published: (2017)
The energetic efficiency device for water atomization by low pressure centrifugal sprayers
by: Pidvysotskyi O.M., et al.
Published: (2001)
by: Pidvysotskyi O.M., et al.
Published: (2001)
Effect of the nonuniformity of water-concentration distribution on the cooling of circulation water in a drip-type cooling tower
by: Shraiber O.A., et al.
Published: (2012)
by: Shraiber O.A., et al.
Published: (2012)
Possibility of Enhancing the Efficiency of Operation of Film Cooling Towers by Means of the Use of Sprinklers with Profiled Surface
by: Dubrovskyi V.V., et al.
Published: (2011)
by: Dubrovskyi V.V., et al.
Published: (2011)
Heat transfer on profiled surfaces of industrial film-type cooling towers
by: Dubrovskyi V.V., et al.
Published: (2014)
by: Dubrovskyi V.V., et al.
Published: (2014)
A film-type cooling tower with a profiled sprinklers surface
by: Dubrovskyi V.V.
Published: (2016)
by: Dubrovskyi V.V.
Published: (2016)
Calculation of liquid cooling in film cooling towers with a profiled sprinkler surface
by: V. V. Dubrovskyi
Published: (2017)
by: V. V. Dubrovskyi
Published: (2017)
Influence of Lubricating-Cooling Technological Media on Metal Destruction During Cutting
by: Soshko, Oleksandr I., et al.
Published: (2019)
by: Soshko, Oleksandr I., et al.
Published: (2019)
Influence of Lubricating-Cooling Technological Media on Metal Destruction During Cutting
by: Soshko, Oleksandr I., et al.
Published: (2019)
by: Soshko, Oleksandr I., et al.
Published: (2019)
USE OF GEOTHERMAL COOLING BY AIR CONDITIONING SYSTEMS AS A MEANS OF REDUCING THE LOAD ON POWER SUPPLY SYSTEMS IN THE WARM SEASON
by: Lysak , O.
Published: (2025)
by: Lysak , O.
Published: (2025)
A film-type cooling tower with a profiled sprinklers surface
by: V. V. Dubrovskyi
Published: (2016)
by: V. V. Dubrovskyi
Published: (2016)
Water Cooling Device of Cooling Tower of Cherkassky Thermal Power Station Efficiency Increase
by: A. S. Biletskaja, et al.
Published: (2011)
by: A. S. Biletskaja, et al.
Published: (2011)
APPLIED METHODOLOGY OF COMPLEX APPLICATION OF FREE COOLING AND HEAT PUMP TECHNOLOGIES
by: Perepelytsia , I., et al.
Published: (2024)
by: Perepelytsia , I., et al.
Published: (2024)
Optimal cooling of a driven artificial atom in dissipative environment
by: L. Du, et al.
Published: (2013)
by: L. Du, et al.
Published: (2013)
Optimal cooling of a driven artificial atom in dissipative environment
by: Du, Lingjie, et al.
Published: (2013)
by: Du, Lingjie, et al.
Published: (2013)
Heat transfer in film-type cooling towers with a profiled surface of sprinklers under conditions of the longitudinal and cross direction of air flow
by: Dubrovskyi V.V., et al.
Published: (2014)
by: Dubrovskyi V.V., et al.
Published: (2014)
TECHNOLOGICAL PARAMETERS OF THE COOLING MODE OF POLYMER INSULATION OF POWER CABLES
by: Bezprozvannych, G. V., et al.
Published: (2019)
by: Bezprozvannych, G. V., et al.
Published: (2019)
Thermomechanical loads of powerful turbogenerator stator winding insulation in the presence of water cooling defects
by: Kuchynskyi, K. A., et al.
Published: (2023)
by: Kuchynskyi, K. A., et al.
Published: (2023)
INVESTIGATION OF THE SPECTRUM OF ZN I ATOMS IN THE TRIPLET RYDBERG STATES
by: Pogrebnyak, N. I., et al.
Published: (2021)
by: Pogrebnyak, N. I., et al.
Published: (2021)
COMPUTER MODELING ANALYSIS OF PHOTOVOLTAIC (PV) MODULES WITHOUT AND WITH INTEGRATED COOLING SYSTEMS
by: Axtamov , T. Z., et al.
Published: (2025)
by: Axtamov , T. Z., et al.
Published: (2025)
EXCITATION OF Zn ATOMS TO THE 4snf RYDBERG STATES
by: Kutsenko, A. S., et al.
Published: (2015)
by: Kutsenko, A. S., et al.
Published: (2015)
LASER-MICROWAVE SPECTROMETER AND SPECTROSCOPY OF ZINC ATOM IN TRIPLET RYDBERG STATES
by: Pogrebnyak, N. L., et al.
Published: (2019)
by: Pogrebnyak, N. L., et al.
Published: (2019)
Review of some schemes of cooling of turbogenerators and control of humidity of cooling hydrogen
by: A. S. Levytskyi, et al.
Published: (2014)
by: A. S. Levytskyi, et al.
Published: (2014)
Cooled contact connections
by: N. N. Dzektser, et al.
Published: (2016)
by: N. N. Dzektser, et al.
Published: (2016)
The released cooling system containing melting substances used for cooling of powerful transistor
by: A. I. Shapiro, et al.
Published: (2002)
by: A. I. Shapiro, et al.
Published: (2002)
Analysis of the thermal state of the electromagnetic mill inductor with oil cooling in stationary operation modes
by: Milykh, V. I., et al.
Published: (2023)
by: Milykh, V. I., et al.
Published: (2023)
ANALYSIS OF STATIC CHARACTERISTICS OF THE CENTRIFUGAL REGULATOR OF THE WIND ROTOR WITH FLUGE CONTROL
by: Golovko, V., et al.
Published: (2021)
by: Golovko, V., et al.
Published: (2021)
The limits of thermoelectric cooling for photodetectors
by: L. I. Anatychuk, et al.
Published: (2013)
by: L. I. Anatychuk, et al.
Published: (2013)
ANALYSIS OF STATIC CHARACTERISTICS OF THE CENTRIFUGAL REGULATOR OF THE WIND ROTOR ROTOR WITH ANTI-FLUGE CONTROL
by: Golovko, V., et al.
Published: (2022)
by: Golovko, V., et al.
Published: (2022)
Influence of the geometrical characteristics of the surface with spherical wells on heat exchange of water and air
by: Dubrovskyi V.V., et al.
Published: (2015)
by: Dubrovskyi V.V., et al.
Published: (2015)
Effect of radial dispersion of cooling rates in frozen sample on colony-forming ability of Saccharomyces cerevisiae
by: Ju. Sirenko, et al.
Published: (2009)
by: Ju. Sirenko, et al.
Published: (2009)
Enhancing the Efficiency of the Turbogenerator Cooling System Through the Use of Finned Tubes in the Gas Cooler
by: Шестак, Б. К.
Published: (2026)
by: Шестак, Б. К.
Published: (2026)
Enhancing the Efficiency of the Turbogenerator Cooling System Through the Use of Finned Tubes in the Gas Cooler
by: Шестак, Б. К.
Published: (2026)
by: Шестак, Б. К.
Published: (2026)
Quantum field methods in the electron cooling
by: Khelemelya, O.V., et al.
Published: (2013)
by: Khelemelya, O.V., et al.
Published: (2013)
Cooling of mechanical vibrations by heat flow
by: Kulinich, S.I., et al.
Published: (2018)
by: Kulinich, S.I., et al.
Published: (2018)
Numerical approach for simulation of Palmer cooling
by: Dolinska, M.E., et al.
Published: (2018)
by: Dolinska, M.E., et al.
Published: (2018)
Similar Items
-
Optimization of the cooling mode of circulating water in atomizing cooling towers
by: Shraiber O.A., et al.
Published: (2007) -
A study of the hydraulic characteristics of centrifugal atomizers of cooling towers and ways of their improvement
by: Dubrovskyi V.V., et al.
Published: (2008) -
Enhancement of the operation efficiency of a cooling tower at the expense of regulation of the uniformity of distribution of atomized drops over the irrigation area
by: Dubrovskyi, et al.
Published: (2006) -
Experimental investigation of the liquid outflow process from centrifugal atomizers intended for cooling towers
by: Dubrovskyi V.V., et al.
Published: (2001) -
Calculation of liquid cooling in film cooling towers with a profiled sprinkler surface
by: Dubrovskyi V.V.
Published: (2017)