Buchumschlag

Heat transfer on profiled surfaces of industrial film-type cooling towers

Film-type cooling towers for circulation water are widely used in power engineering and industry. The search for new shapes of sprinkler surfaces, which can enhance the efficiency of the operation of cooling towers, is an important scientific and technical problem.One of the ways of increasing the c...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	Dubrovskyi V.V., Pidvysotskyi O.M., Gryshuk M.S., Nedilko A.P.
Format:	Artikel
Sprache:	Ukrainisch
Veröffentlicht:	General Energy Institute of the National Academy of Sciences of Ukraine 2014
Schlagworte:	film-type cooling tower profiled surface of sprinklers heat transfer cooling degree.
Online Zugang:	https://systemre.org/index.php/journal/article/view/530
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	System Research in Energy

Institution

System Research in Energy

Ähnliche Einträge

Influence of the geometrical characteristics of the surface with spherical wells on heat exchange of water and air
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2015)

A film-type cooling tower with a profiled sprinklers surface
von: Dubrovskyi V.V.
Veröffentlicht: (2016)

Calculation of liquid cooling in film cooling towers with a profiled sprinkler surface
von: Dubrovskyi V.V.
Veröffentlicht: (2017)

Heat transfer between liquid and air on surface with different shape of dimples
von: Dubrovskyi V.V.
Veröffentlicht: (2016)

Possibility of Enhancing the Efficiency of Operation of Film Cooling Towers by Means of the Use of Sprinklers with Profiled Surface
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2011)

Effect of the nonuniformity of water-concentration distribution on the cooling of circulation water in a drip-type cooling tower
von: Shraiber O.A., et al.
Veröffentlicht: (2012)

Optimization of the cooling mode of circulating water in atomizing cooling towers
von: Shraiber O.A., et al.
Veröffentlicht: (2007)

Heat transfer in film-type cooling towers with a profiled surface of sprinklers under conditions of the longitudinal and cross direction of air flow
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014)

Heat transfer of a liquid film flowing over a flat surface with spherical indentations with air
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2008)

A study of the hydraulic characteristics of centrifugal atomizers of cooling towers and ways of their improvement
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2008)

Enhancement of the cooling ability of a cooling tower at the expense of increasing the cooling surface in the course of liquid atomization by centrifugal atomizers
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2006)

High-efficiency heat-exchange surface for film processes
von: Dubrovskyi V.V.
Veröffentlicht: (2017)

The energetic efficiency device for water atomization by low pressure centrifugal sprayers
von: Pidvysotskyi O.M., et al.
Veröffentlicht: (2001)

Influence of the relative velocity between water and air on their heat transfer at the flow of a film along a profiled surface
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2012)

USE OF GEOTHERMAL COOLING BY AIR CONDITIONING SYSTEMS AS A MEANS OF REDUCING THE LOAD ON POWER SUPPLY SYSTEMS IN THE WARM SEASON
von: Lysak , O.
Veröffentlicht: (2025)

APPLIED METHODOLOGY OF COMPLEX APPLICATION OF FREE COOLING AND HEAT PUMP TECHNOLOGIES
von: Perepelytsia , I., et al.
Veröffentlicht: (2024)

COMPUTER MODELING ANALYSIS OF PHOTOVOLTAIC (PV) MODULES WITHOUT AND WITH INTEGRATED COOLING SYSTEMS
von: Axtamov , T. Z., et al.
Veröffentlicht: (2025)

Usage the transfer properties in heating and evaporable cooling of the fluid film during design stage of heat and mass exchangers
von: Tuz V.E., et al.
Veröffentlicht: (2014)

Heat recovery of the waste gas boilers, in combined heat and mass transfer apparatus
von: Tuz V.E., et al.
Veröffentlicht: (2011)

An engineering method for calculating the abrasive wear of heat-transfer surfaces of a boiler
von: Yatsenko V.P., et al.
Veröffentlicht: (2009)

Формирование слоистой структуры в плёнках никеля при электроосаждении импульсным током
von: Штапенко, Э.Ф., et al.
Veröffentlicht: (2019)

Повышение качества поверхностных электроэрозионно-легированных слоёв комбинированными покрытиями и поверхностным пластическим деформированием. I. Особенности формирования комбинированных электроэрозионных покрытий на специальных сталях и сплавах
von: Тарельник, В.Б., et al.
Veröffentlicht: (2019)

Modeling of the abrasive wear of convective heat transfer surfaces of a boiler
von: Shraiber O.A., et al.
Veröffentlicht: (2008)

DEVELOPMENT OF A SYSTEM FOR GENERATING HEAT AND COLD FOR THE NEEDS OF PHARMACEUTICAL COMPANIES
von: Perepelytsia , I., et al.
Veröffentlicht: (2025)

Calculation of liquid cooling in film cooling towers with a profiled sprinkler surface
von: V. V. Dubrovskyi
Veröffentlicht: (2017)

Thermomechanical loads of powerful turbogenerator stator winding insulation in the presence of water cooling defects
von: Kuchynskyi, K. A., et al.
Veröffentlicht: (2023)

A film-type cooling tower with a profiled sprinklers surface
von: V. V. Dubrovskyi
Veröffentlicht: (2016)

Experimental investigation of the liquid outflow process from centrifugal atomizers intended for cooling towers
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2001)

Increasing the efficiency of industrial mazut-gas boilers
von: Tuz V.E., et al.
Veröffentlicht: (2011)

Multiplicative orders of elements in Conway's towers of finite fields
von: Popovych, Roman
Veröffentlicht: (2018)

TECHNOLOGICAL PARAMETERS OF THE COOLING MODE OF POLYMER INSULATION OF POWER CABLES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2019)

DETERMINATION HEAT TRANSFER COEFFICIENTS UV AND UV FOR PV PLANT`S MODELING USING PVSYST SOFTWARE
von: Bordakov, M.
Veröffentlicht: (2021)

R-functions and chevron surfaces in machine building
von: Шейко, Т. И., et al.
Veröffentlicht: (2017)

R-functions and chevron surfaces in machine building
von: Шейко, Т. И., et al.
Veröffentlicht: (2017)

Influence of Lubricating-Cooling Technological Media on Metal Destruction During Cutting
von: Soshko, Oleksandr I., et al.
Veröffentlicht: (2019)

Influence of Lubricating-Cooling Technological Media on Metal Destruction During Cutting
von: Soshko, Oleksandr I., et al.
Veröffentlicht: (2019)

The word problem in Hanoi Towers groups
von: Bondarenko, Ievgen
Veröffentlicht: (2018)

Analysis of technical requirements for heating mains in geothermal heating supply systems
von: Oliinichenko, V.
Veröffentlicht: (2016)

Тепловіддача на профільованих поверхнях промислових плівкових градирень
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014)

Analysis of the thermal state of the electromagnetic mill inductor with oil cooling in stationary operation modes
von: Milykh, V. I., et al.
Veröffentlicht: (2023)