Heat transfer on profiled surfaces of industrial film-type cooling towers
Film-type cooling towers for circulation water are widely used in power engineering and industry. The search for new shapes of sprinkler surfaces, which can enhance the efficiency of the operation of cooling towers, is an important scientific and technical problem.One of the ways of increasing the c...
Saved in:
| Date: | 2014 |
|---|---|
| Main Authors: | Dubrovskyi V.V., Pidvysotskyi O.M., Gryshuk M.S., Nedilko A.P. |
| Format: | Article |
| Language: | Ukrainian |
| Published: |
General Energy Institute of the National Academy of Sciences of Ukraine
2014
|
| Subjects: | |
| Online Access: | https://systemre.org/index.php/journal/article/view/530 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | System Research in Energy |
Institution
System Research in EnergySimilar Items
Influence of the geometrical characteristics of the surface with spherical wells on heat exchange of water and air
by: Dubrovskyi V.V., et al.
Published: (2015)
by: Dubrovskyi V.V., et al.
Published: (2015)
A film-type cooling tower with a profiled sprinklers surface
by: Dubrovskyi V.V.
Published: (2016)
by: Dubrovskyi V.V.
Published: (2016)
Calculation of liquid cooling in film cooling towers with a profiled sprinkler surface
by: Dubrovskyi V.V.
Published: (2017)
by: Dubrovskyi V.V.
Published: (2017)
Heat transfer between liquid and air on surface with different shape of dimples
by: Dubrovskyi V.V.
Published: (2016)
by: Dubrovskyi V.V.
Published: (2016)
Possibility of Enhancing the Efficiency of Operation of Film Cooling Towers by Means of the Use of Sprinklers with Profiled Surface
by: Dubrovskyi V.V., et al.
Published: (2011)
by: Dubrovskyi V.V., et al.
Published: (2011)
Effect of the nonuniformity of water-concentration distribution on the cooling of circulation water in a drip-type cooling tower
by: Shraiber O.A., et al.
Published: (2012)
by: Shraiber O.A., et al.
Published: (2012)
Optimization of the cooling mode of circulating water in atomizing cooling towers
by: Shraiber O.A., et al.
Published: (2007)
by: Shraiber O.A., et al.
Published: (2007)
Heat transfer in film-type cooling towers with a profiled surface of sprinklers under conditions of the longitudinal and cross direction of air flow
by: Dubrovskyi V.V., et al.
Published: (2014)
by: Dubrovskyi V.V., et al.
Published: (2014)
Heat transfer of a liquid film flowing over a flat surface with spherical indentations with air
by: Dubrovskyi V.V., et al.
Published: (2008)
by: Dubrovskyi V.V., et al.
Published: (2008)
A study of the hydraulic characteristics of centrifugal atomizers of cooling towers and ways of their improvement
by: Dubrovskyi V.V., et al.
Published: (2008)
by: Dubrovskyi V.V., et al.
Published: (2008)
Enhancement of the cooling ability of a cooling tower at the expense of increasing the cooling surface in the course of liquid atomization by centrifugal atomizers
by: Dubrovskyi V.V., et al.
Published: (2006)
by: Dubrovskyi V.V., et al.
Published: (2006)
High-efficiency heat-exchange surface for film processes
by: Dubrovskyi V.V.
Published: (2017)
by: Dubrovskyi V.V.
Published: (2017)
The energetic efficiency device for water atomization by low pressure centrifugal sprayers
by: Pidvysotskyi O.M., et al.
Published: (2001)
by: Pidvysotskyi O.M., et al.
Published: (2001)
Influence of the relative velocity between water and air on their heat transfer at the flow of a film along a profiled surface
by: Dubrovskyi V.V., et al.
Published: (2012)
by: Dubrovskyi V.V., et al.
Published: (2012)
USE OF GEOTHERMAL COOLING BY AIR CONDITIONING SYSTEMS AS A MEANS OF REDUCING THE LOAD ON POWER SUPPLY SYSTEMS IN THE WARM SEASON
by: Lysak , O.
Published: (2025)
by: Lysak , O.
Published: (2025)
APPLIED METHODOLOGY OF COMPLEX APPLICATION OF FREE COOLING AND HEAT PUMP TECHNOLOGIES
by: Perepelytsia , I., et al.
Published: (2024)
by: Perepelytsia , I., et al.
Published: (2024)
COMPUTER MODELING ANALYSIS OF PHOTOVOLTAIC (PV) MODULES WITHOUT AND WITH INTEGRATED COOLING SYSTEMS
by: Axtamov , T. Z., et al.
Published: (2025)
by: Axtamov , T. Z., et al.
Published: (2025)
Usage the transfer properties in heating and evaporable cooling of the fluid film during design stage of heat and mass exchangers
by: Tuz V.E., et al.
Published: (2014)
by: Tuz V.E., et al.
Published: (2014)
Heat recovery of the waste gas boilers, in combined heat and mass transfer apparatus
by: Tuz V.E., et al.
Published: (2011)
by: Tuz V.E., et al.
Published: (2011)
An engineering method for calculating the abrasive wear of heat-transfer surfaces of a boiler
by: Yatsenko V.P., et al.
Published: (2009)
by: Yatsenko V.P., et al.
Published: (2009)
Формирование слоистой структуры в плёнках никеля при электроосаждении импульсным током
by: Штапенко, Э.Ф., et al.
Published: (2019)
by: Штапенко, Э.Ф., et al.
Published: (2019)
Повышение качества поверхностных электроэрозионно-легированных слоёв комбинированными покрытиями и поверхностным пластическим деформированием. I. Особенности формирования комбинированных электроэрозионных покрытий на специальных сталях и сплавах
by: Тарельник, В.Б., et al.
Published: (2019)
by: Тарельник, В.Б., et al.
Published: (2019)
Modeling of the abrasive wear of convective heat transfer surfaces of a boiler
by: Shraiber O.A., et al.
Published: (2008)
by: Shraiber O.A., et al.
Published: (2008)
DEVELOPMENT OF A SYSTEM FOR GENERATING HEAT AND COLD FOR THE NEEDS OF PHARMACEUTICAL COMPANIES
by: Perepelytsia , I., et al.
Published: (2025)
by: Perepelytsia , I., et al.
Published: (2025)
Calculation of liquid cooling in film cooling towers with a profiled sprinkler surface
by: V. V. Dubrovskyi
Published: (2017)
by: V. V. Dubrovskyi
Published: (2017)
Thermomechanical loads of powerful turbogenerator stator winding insulation in the presence of water cooling defects
by: Kuchynskyi, K. A., et al.
Published: (2023)
by: Kuchynskyi, K. A., et al.
Published: (2023)
A film-type cooling tower with a profiled sprinklers surface
by: V. V. Dubrovskyi
Published: (2016)
by: V. V. Dubrovskyi
Published: (2016)
Experimental investigation of the liquid outflow process from centrifugal atomizers intended for cooling towers
by: Dubrovskyi V.V., et al.
Published: (2001)
by: Dubrovskyi V.V., et al.
Published: (2001)
Increasing the efficiency of industrial mazut-gas boilers
by: Tuz V.E., et al.
Published: (2011)
by: Tuz V.E., et al.
Published: (2011)
Multiplicative orders of elements in Conway's towers of finite fields
by: Popovych, Roman
Published: (2018)
by: Popovych, Roman
Published: (2018)
TECHNOLOGICAL PARAMETERS OF THE COOLING MODE OF POLYMER INSULATION OF POWER CABLES
by: Bezprozvannych, G. V., et al.
Published: (2019)
by: Bezprozvannych, G. V., et al.
Published: (2019)
DETERMINATION HEAT TRANSFER COEFFICIENTS UV AND UV FOR PV PLANT`S MODELING USING PVSYST SOFTWARE
by: Bordakov, M.
Published: (2021)
by: Bordakov, M.
Published: (2021)
R-functions and chevron surfaces in machine building
by: Шейко, Т. И., et al.
Published: (2017)
by: Шейко, Т. И., et al.
Published: (2017)
R-functions and chevron surfaces in machine building
by: Шейко, Т. И., et al.
Published: (2017)
by: Шейко, Т. И., et al.
Published: (2017)
Influence of Lubricating-Cooling Technological Media on Metal Destruction During Cutting
by: Soshko, Oleksandr I., et al.
Published: (2019)
by: Soshko, Oleksandr I., et al.
Published: (2019)
Influence of Lubricating-Cooling Technological Media on Metal Destruction During Cutting
by: Soshko, Oleksandr I., et al.
Published: (2019)
by: Soshko, Oleksandr I., et al.
Published: (2019)
The word problem in Hanoi Towers groups
by: Bondarenko, Ievgen
Published: (2018)
by: Bondarenko, Ievgen
Published: (2018)
Analysis of technical requirements for heating mains in geothermal heating supply systems
by: Oliinichenko, V.
Published: (2016)
by: Oliinichenko, V.
Published: (2016)
Тепловіддача на профільованих поверхнях промислових плівкових градирень
by: Dubrovskyi V.V., et al.
Published: (2014)
by: Dubrovskyi V.V., et al.
Published: (2014)
Analysis of the thermal state of the electromagnetic mill inductor with oil cooling in stationary operation modes
by: Milykh, V. I., et al.
Published: (2023)
by: Milykh, V. I., et al.
Published: (2023)
Similar Items
-
Influence of the geometrical characteristics of the surface with spherical wells on heat exchange of water and air
by: Dubrovskyi V.V., et al.
Published: (2015) -
A film-type cooling tower with a profiled sprinklers surface
by: Dubrovskyi V.V.
Published: (2016) -
Calculation of liquid cooling in film cooling towers with a profiled sprinkler surface
by: Dubrovskyi V.V.
Published: (2017) -
Heat transfer between liquid and air on surface with different shape of dimples
by: Dubrovskyi V.V.
Published: (2016) -
Possibility of Enhancing the Efficiency of Operation of Film Cooling Towers by Means of the Use of Sprinklers with Profiled Surface
by: Dubrovskyi V.V., et al.
Published: (2011)