Calculation of liquid cooling in film cooling towers with a profiled sprinkler surface
We have developed a method for calculating the degree of liquid cooling in film cooling towers with a profiled sprinkler surface under the conditions of quiescent air and intense blowing about the water film. The method is based on our experimental investigations that result in finding a highly effi...
Gespeichert in:
| Datum: | 2017 |
|---|---|
| 1. Verfasser: | Dubrovskyi V.V. |
| Format: | Artikel |
| Sprache: | Ukrainisch |
| Veröffentlicht: |
General Energy Institute of the National Academy of Sciences of Ukraine
2017
|
| Schlagworte: | |
| Online Zugang: | https://systemre.org/index.php/journal/article/view/596 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | System Research in Energy |
Institution
System Research in EnergyÄhnliche Einträge
A film-type cooling tower with a profiled sprinklers surface
von: Dubrovskyi V.V.
Veröffentlicht: (2016)
von: Dubrovskyi V.V.
Veröffentlicht: (2016)
Heat transfer on profiled surfaces of industrial film-type cooling towers
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014)
Possibility of Enhancing the Efficiency of Operation of Film Cooling Towers by Means of the Use of Sprinklers with Profiled Surface
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2011)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2011)
Heat transfer between liquid and air on surface with different shape of dimples
von: Dubrovskyi V.V.
Veröffentlicht: (2016)
von: Dubrovskyi V.V.
Veröffentlicht: (2016)
Optimization of the cooling mode of circulating water in atomizing cooling towers
von: Shraiber O.A., et al.
Veröffentlicht: (2007)
von: Shraiber O.A., et al.
Veröffentlicht: (2007)
Effect of the nonuniformity of water-concentration distribution on the cooling of circulation water in a drip-type cooling tower
von: Shraiber O.A., et al.
Veröffentlicht: (2012)
von: Shraiber O.A., et al.
Veröffentlicht: (2012)
Influence of the geometrical characteristics of the surface with spherical wells on heat exchange of water and air
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2015)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2015)
Calculation of liquid cooling in film cooling towers with a profiled sprinkler surface
von: V. V. Dubrovskyi
Veröffentlicht: (2017)
von: V. V. Dubrovskyi
Veröffentlicht: (2017)
A study of the hydraulic characteristics of centrifugal atomizers of cooling towers and ways of their improvement
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2008)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2008)
Enhancement of the cooling ability of a cooling tower at the expense of increasing the cooling surface in the course of liquid atomization by centrifugal atomizers
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2006)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2006)
A film-type cooling tower with a profiled sprinklers surface
von: V. V. Dubrovskyi
Veröffentlicht: (2016)
von: V. V. Dubrovskyi
Veröffentlicht: (2016)
Heat transfer in film-type cooling towers with a profiled surface of sprinklers under conditions of the longitudinal and cross direction of air flow
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014)
Heat transfer of a liquid film flowing over a flat surface with spherical indentations with air
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2008)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2008)
USE OF GEOTHERMAL COOLING BY AIR CONDITIONING SYSTEMS AS A MEANS OF REDUCING THE LOAD ON POWER SUPPLY SYSTEMS IN THE WARM SEASON
von: Lysak , O.
Veröffentlicht: (2025)
von: Lysak , O.
Veröffentlicht: (2025)
High-efficiency heat-exchange surface for film processes
von: Dubrovskyi V.V.
Veröffentlicht: (2017)
von: Dubrovskyi V.V.
Veröffentlicht: (2017)
APPLIED METHODOLOGY OF COMPLEX APPLICATION OF FREE COOLING AND HEAT PUMP TECHNOLOGIES
von: Perepelytsia , I., et al.
Veröffentlicht: (2024)
von: Perepelytsia , I., et al.
Veröffentlicht: (2024)
The energetic efficiency device for water atomization by low pressure centrifugal sprayers
von: Pidvysotskyi O.M., et al.
Veröffentlicht: (2001)
von: Pidvysotskyi O.M., et al.
Veröffentlicht: (2001)
COMPUTER MODELING ANALYSIS OF PHOTOVOLTAIC (PV) MODULES WITHOUT AND WITH INTEGRATED COOLING SYSTEMS
von: Axtamov , T. Z., et al.
Veröffentlicht: (2025)
von: Axtamov , T. Z., et al.
Veröffentlicht: (2025)
Usage the transfer properties in heating and evaporable cooling of the fluid film during design stage of heat and mass exchangers
von: Tuz V.E., et al.
Veröffentlicht: (2014)
von: Tuz V.E., et al.
Veröffentlicht: (2014)
Thermomechanical loads of powerful turbogenerator stator winding insulation in the presence of water cooling defects
von: Kuchynskyi, K. A., et al.
Veröffentlicht: (2023)
von: Kuchynskyi, K. A., et al.
Veröffentlicht: (2023)
TECHNOLOGICAL PARAMETERS OF THE COOLING MODE OF POLYMER INSULATION OF POWER CABLES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2019)
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2019)
Experimental investigation of the liquid outflow process from centrifugal atomizers intended for cooling towers
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2001)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2001)
Influence of the relative velocity between water and air on their heat transfer at the flow of a film along a profiled surface
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2012)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2012)
Heat recovery of the waste gas boilers, in combined heat and mass transfer apparatus
von: Tuz V.E., et al.
Veröffentlicht: (2011)
von: Tuz V.E., et al.
Veröffentlicht: (2011)
DEVELOPMENT OF A SYSTEM FOR GENERATING HEAT AND COLD FOR THE NEEDS OF PHARMACEUTICAL COMPANIES
von: Perepelytsia , I., et al.
Veröffentlicht: (2025)
von: Perepelytsia , I., et al.
Veröffentlicht: (2025)
Influence of Lubricating-Cooling Technological Media on Metal Destruction During Cutting
von: Soshko, Oleksandr I., et al.
Veröffentlicht: (2019)
von: Soshko, Oleksandr I., et al.
Veröffentlicht: (2019)
Influence of Lubricating-Cooling Technological Media on Metal Destruction During Cutting
von: Soshko, Oleksandr I., et al.
Veröffentlicht: (2019)
von: Soshko, Oleksandr I., et al.
Veröffentlicht: (2019)
Analysis of the thermal state of the electromagnetic mill inductor with oil cooling in stationary operation modes
von: Milykh, V. I., et al.
Veröffentlicht: (2023)
von: Milykh, V. I., et al.
Veröffentlicht: (2023)
Increasing the efficiency of industrial mazut-gas boilers
von: Tuz V.E., et al.
Veröffentlicht: (2011)
von: Tuz V.E., et al.
Veröffentlicht: (2011)
An engineering method for calculating the abrasive wear of heat-transfer surfaces of a boiler
von: Yatsenko V.P., et al.
Veröffentlicht: (2009)
von: Yatsenko V.P., et al.
Veröffentlicht: (2009)
Water Cooling Device of Cooling Tower of Cherkassky Thermal Power Station Efficiency Increase
von: A. S. Biletskaja, et al.
Veröffentlicht: (2011)
von: A. S. Biletskaja, et al.
Veröffentlicht: (2011)
Multiplicative orders of elements in Conway's towers of finite fields
von: Popovych, Roman
Veröffentlicht: (2018)
von: Popovych, Roman
Veröffentlicht: (2018)
Using the enthalpy of cooling of the high-temperature elements of thermal plants by the method of thermochemical recuperation (thermochemical protection)
von: Shraiber O.A.
Veröffentlicht: (2016)
von: Shraiber O.A.
Veröffentlicht: (2016)
Enhancement of the operation efficiency of a cooling tower at the expense of regulation of the uniformity of distribution of atomized drops over the irrigation area
von: Dubrovskyi, et al.
Veröffentlicht: (2006)
von: Dubrovskyi, et al.
Veröffentlicht: (2006)
Analysis of technical requirements for heating mains in geothermal heating supply systems
von: Oliinichenko, V.
Veröffentlicht: (2016)
von: Oliinichenko, V.
Veröffentlicht: (2016)
The word problem in Hanoi Towers groups
von: Bondarenko, Ievgen
Veröffentlicht: (2018)
von: Bondarenko, Ievgen
Veröffentlicht: (2018)
ENERGY EFFICIENCY OF THE SHALLOW AQUIFERS UTILIZATION FOR THE DISTRICT HEATING AND COOLING
von: Morozov, Yu., et al.
Veröffentlicht: (2019)
von: Morozov, Yu., et al.
Veröffentlicht: (2019)
Optical Properties of Dye-Filled Polymer Films Deposited in Vacuum
von: Гриценко, К., et al.
Veröffentlicht: (2012)
von: Гриценко, К., et al.
Veröffentlicht: (2012)
Calculation of thermoelectric system for cooling leds
von: V. S. Zakordonets, et al.
Veröffentlicht: (2018)
von: V. S. Zakordonets, et al.
Veröffentlicht: (2018)
Calculation of thermoelectric system for cooling leds
von: V. S. Zakordonets, et al.
Veröffentlicht: (2018)
von: V. S. Zakordonets, et al.
Veröffentlicht: (2018)
Ähnliche Einträge
-
A film-type cooling tower with a profiled sprinklers surface
von: Dubrovskyi V.V.
Veröffentlicht: (2016) -
Heat transfer on profiled surfaces of industrial film-type cooling towers
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014) -
Possibility of Enhancing the Efficiency of Operation of Film Cooling Towers by Means of the Use of Sprinklers with Profiled Surface
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2011) -
Heat transfer between liquid and air on surface with different shape of dimples
von: Dubrovskyi V.V.
Veröffentlicht: (2016) -
Optimization of the cooling mode of circulating water in atomizing cooling towers
von: Shraiber O.A., et al.
Veröffentlicht: (2007)