Influence of the geometrical characteristics of the surface with spherical wells on heat exchange of water and air
One of the ways of increasing the cooling capacity of film-type cooling towers is the use of sprinklers in the form of profiled surfaces with spherical dimples, which provide a high efficiency of heat transfer from water to air. The search for new shapes of sprinkler surfaces, which can enhance the...
Gespeichert in:
| Datum: | 2015 |
|---|---|
| Hauptverfasser: | Dubrovskyi V.V., Pidvysotskyi O.M. |
| Format: | Artikel |
| Sprache: | Ukrainisch |
| Veröffentlicht: |
General Energy Institute of the National Academy of Sciences of Ukraine
2015
|
| Schlagworte: | |
| Online Zugang: | https://systemre.org/index.php/journal/article/view/72 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | System Research in Energy |
Institution
System Research in EnergyÄhnliche Einträge
Heat transfer on profiled surfaces of industrial film-type cooling towers
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014)
Heat transfer between liquid and air on surface with different shape of dimples
von: Dubrovskyi V.V.
Veröffentlicht: (2016)
von: Dubrovskyi V.V.
Veröffentlicht: (2016)
A film-type cooling tower with a profiled sprinklers surface
von: Dubrovskyi V.V.
Veröffentlicht: (2016)
von: Dubrovskyi V.V.
Veröffentlicht: (2016)
Calculation of liquid cooling in film cooling towers with a profiled sprinkler surface
von: Dubrovskyi V.V.
Veröffentlicht: (2017)
von: Dubrovskyi V.V.
Veröffentlicht: (2017)
Possibility of Enhancing the Efficiency of Operation of Film Cooling Towers by Means of the Use of Sprinklers with Profiled Surface
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2011)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2011)
Heat transfer of a liquid film flowing over a flat surface with spherical indentations with air
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2008)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2008)
Effect of the nonuniformity of water-concentration distribution on the cooling of circulation water in a drip-type cooling tower
von: Shraiber O.A., et al.
Veröffentlicht: (2012)
von: Shraiber O.A., et al.
Veröffentlicht: (2012)
High-efficiency heat-exchange surface for film processes
von: Dubrovskyi V.V.
Veröffentlicht: (2017)
von: Dubrovskyi V.V.
Veröffentlicht: (2017)
Optimization of the cooling mode of circulating water in atomizing cooling towers
von: Shraiber O.A., et al.
Veröffentlicht: (2007)
von: Shraiber O.A., et al.
Veröffentlicht: (2007)
The energetic efficiency device for water atomization by low pressure centrifugal sprayers
von: Pidvysotskyi O.M., et al.
Veröffentlicht: (2001)
von: Pidvysotskyi O.M., et al.
Veröffentlicht: (2001)
Heat transfer in film-type cooling towers with a profiled surface of sprinklers under conditions of the longitudinal and cross direction of air flow
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014)
Influence of the relative velocity between water and air on their heat transfer at the flow of a film along a profiled surface
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2012)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2012)
A study of the hydraulic characteristics of centrifugal atomizers of cooling towers and ways of their improvement
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2008)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2008)
Enhancement of the cooling ability of a cooling tower at the expense of increasing the cooling surface in the course of liquid atomization by centrifugal atomizers
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2006)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2006)
USE OF GEOTHERMAL COOLING BY AIR CONDITIONING SYSTEMS AS A MEANS OF REDUCING THE LOAD ON POWER SUPPLY SYSTEMS IN THE WARM SEASON
von: Lysak , O.
Veröffentlicht: (2025)
von: Lysak , O.
Veröffentlicht: (2025)
APPLIED METHODOLOGY OF COMPLEX APPLICATION OF FREE COOLING AND HEAT PUMP TECHNOLOGIES
von: Perepelytsia , I., et al.
Veröffentlicht: (2024)
von: Perepelytsia , I., et al.
Veröffentlicht: (2024)
COMPUTER MODELING ANALYSIS OF PHOTOVOLTAIC (PV) MODULES WITHOUT AND WITH INTEGRATED COOLING SYSTEMS
von: Axtamov , T. Z., et al.
Veröffentlicht: (2025)
von: Axtamov , T. Z., et al.
Veröffentlicht: (2025)
Usage the transfer properties in heating and evaporable cooling of the fluid film during design stage of heat and mass exchangers
von: Tuz V.E., et al.
Veröffentlicht: (2014)
von: Tuz V.E., et al.
Veröffentlicht: (2014)
Формирование слоистой структуры в плёнках никеля при электроосаждении импульсным током
von: Штапенко, Э.Ф., et al.
Veröffentlicht: (2019)
von: Штапенко, Э.Ф., et al.
Veröffentlicht: (2019)
Повышение качества поверхностных электроэрозионно-легированных слоёв комбинированными покрытиями и поверхностным пластическим деформированием. I. Особенности формирования комбинированных электроэрозионных покрытий на специальных сталях и сплавах
von: Тарельник, В.Б., et al.
Veröffentlicht: (2019)
von: Тарельник, В.Б., et al.
Veröffentlicht: (2019)
Heat recovery of the waste gas boilers, in combined heat and mass transfer apparatus
von: Tuz V.E., et al.
Veröffentlicht: (2011)
von: Tuz V.E., et al.
Veröffentlicht: (2011)
DEVELOPMENT OF A SYSTEM FOR GENERATING HEAT AND COLD FOR THE NEEDS OF PHARMACEUTICAL COMPANIES
von: Perepelytsia , I., et al.
Veröffentlicht: (2025)
von: Perepelytsia , I., et al.
Veröffentlicht: (2025)
Influence of the geometric characteristics of a surface with spherical dimples on heat transfer from water to air
von: V. V. Dubrovskyi, et al.
Veröffentlicht: (2015)
von: V. V. Dubrovskyi, et al.
Veröffentlicht: (2015)
An engineering method for calculating the abrasive wear of heat-transfer surfaces of a boiler
von: Yatsenko V.P., et al.
Veröffentlicht: (2009)
von: Yatsenko V.P., et al.
Veröffentlicht: (2009)
Increasing the efficiency of industrial mazut-gas boilers
von: Tuz V.E., et al.
Veröffentlicht: (2011)
von: Tuz V.E., et al.
Veröffentlicht: (2011)
Thermomechanical loads of powerful turbogenerator stator winding insulation in the presence of water cooling defects
von: Kuchynskyi, K. A., et al.
Veröffentlicht: (2023)
von: Kuchynskyi, K. A., et al.
Veröffentlicht: (2023)
HEAT EXCHANGE DURING THE MOVEMENT OF THE GEOTHERMAL HEAT CARRIER IN THE WELL
von: Morozov, Y., et al.
Veröffentlicht: (2022)
von: Morozov, Y., et al.
Veröffentlicht: (2022)
Modeling of the abrasive wear of convective heat transfer surfaces of a boiler
von: Shraiber O.A., et al.
Veröffentlicht: (2008)
von: Shraiber O.A., et al.
Veröffentlicht: (2008)
R-functions and chevron surfaces in machine building
von: Шейко, Т. И., et al.
Veröffentlicht: (2017)
von: Шейко, Т. И., et al.
Veröffentlicht: (2017)
R-functions and chevron surfaces in machine building
von: Шейко, Т. И., et al.
Veröffentlicht: (2017)
von: Шейко, Т. И., et al.
Veröffentlicht: (2017)
Analysis of technical requirements for heating mains in geothermal heating supply systems
von: Oliinichenko, V.
Veröffentlicht: (2016)
von: Oliinichenko, V.
Veröffentlicht: (2016)
DETERMINATION HEAT TRANSFER COEFFICIENTS UV AND UV FOR PV PLANT`S MODELING USING PVSYST SOFTWARE
von: Bordakov, M.
Veröffentlicht: (2021)
von: Bordakov, M.
Veröffentlicht: (2021)
The results of the study of spatio-temporal changes in surface temperatures of Zaporizhya based on satellite data
von: Lischenko, Lyidmila, et al.
Veröffentlicht: (2021)
von: Lischenko, Lyidmila, et al.
Veröffentlicht: (2021)
Structural investigations of photosensitive composites «Au Nps/Selenium film»
von: Рубіш, В. М., et al.
Veröffentlicht: (2020)
von: Рубіш, В. М., et al.
Veröffentlicht: (2020)
TECHNOLOGICAL PARAMETERS OF THE COOLING MODE OF POLYMER INSULATION OF POWER CABLES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2019)
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2019)
ANALYSIS OF THE DEPENDENCE OF THE BOILER'S ENERGY EFFICIENCY ON THE SOOT LAYER THICKNESS DEPOSITED ON ITS HEAT EXCHANGE SURFACE
von: Surzhyk , O.
Veröffentlicht: (2025)
von: Surzhyk , O.
Veröffentlicht: (2025)
Mantle heat flow in the territory of Ukraine
von: Gordienko, V.V., et al.
Veröffentlicht: (2025)
von: Gordienko, V.V., et al.
Veröffentlicht: (2025)
Structural and morphological properties of annealed films of the As2S3-Sb2S3-SbI3 system
von: Грещук, О. М., et al.
Veröffentlicht: (2023)
von: Грещук, О. М., et al.
Veröffentlicht: (2023)
Study of functioning of heat exchanger in soils with different thermal diffusivity
von: Kovyazin, О. S.
Veröffentlicht: (2018)
von: Kovyazin, О. S.
Veröffentlicht: (2018)
THE THEORETICAL JUSTIFICATION FOR THE NEAT-MOISTURE EXCHANGE PARAMETERS IN SOILS AND ATMOSPHERIC AIR UNDER THE CONDITIONS OF CAVE COMPLEX OF KIEV-PECHERSK LAVRA
von: Sitnikov, А.B.
Veröffentlicht: (2014)
von: Sitnikov, А.B.
Veröffentlicht: (2014)
Ähnliche Einträge
-
Heat transfer on profiled surfaces of industrial film-type cooling towers
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2014) -
Heat transfer between liquid and air on surface with different shape of dimples
von: Dubrovskyi V.V.
Veröffentlicht: (2016) -
A film-type cooling tower with a profiled sprinklers surface
von: Dubrovskyi V.V.
Veröffentlicht: (2016) -
Calculation of liquid cooling in film cooling towers with a profiled sprinkler surface
von: Dubrovskyi V.V.
Veröffentlicht: (2017) -
Possibility of Enhancing the Efficiency of Operation of Film Cooling Towers by Means of the Use of Sprinklers with Profiled Surface
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2011)