Buchumschlag

PHASE METHOD OF DETECTING BREAKS IN STATOR WINDINGS OF ASYNCHRONOUS MOTORS

The paper considers the specific features of the technical operation of asynchronous motors in hoisting machines and typical damages to stator windings. It is established that one promising approach to motor protection is the use of computer monitoring systems. These systems' algorithmic and ap...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2024
Hauptverfasser:	Yenikieiev, Olexander, Kuts, Yurii, Tkachenko, Andrii, Sherbak, Leonid
Format:	Artikel
Sprache:	Ukrainisch
Veröffentlicht:	General Energy Institute of the National Academy of Sciences of Ukraine 2024
Schlagworte:	asynchronous motor lifting machine stator winding break of parallel branch protection current overload diagnostics.
Online Zugang:	https://systemre.org/index.php/journal/article/view/874
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	System Research in Energy

Institution

System Research in Energy

Ähnliche Einträge

A 2-pole winding development technique for asynchronous machines with increased number of parallel branches
von: Lushchik, V. D., et al.
Veröffentlicht: (2014)

Фазовий метод виявлення обривів в статорних обмотках асинхронних двигунів
von: Yenikieiev, Olexander, et al.
Veröffentlicht: (2024)

Adding effect of current displacement and magnetic circuit saturation in an asynchronous motor mathematical model
von: Tsodik, I. A., et al.
Veröffentlicht: (2014)

A mathematical model of an induction motor with the stator and rotor unsymmetry
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)

DIRECT FREQUENCY CONVERTER WITH ARTIFICIAL AND NATURAL COMMUTATION FOR BRUSHLESS ASYNCHRONIZED MACHINES
von: Galinovskiy, A. M., et al.
Veröffentlicht: (2015)

REACTIVE POWER COMPENSATION IN ASYNCHRONOUS ELECTRIC DRIVES.
von: Malyar, V. S., et al.
Veröffentlicht: (2013)

DYNAMIC REGIMES OF ASYNCHRONOUS MOTORS WITH CONCATENATED CAPACITORS
von: Malyar, V. S., et al.
Veröffentlicht: (2015)

THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)

A truck’s starter motor with a nonsalient-pole stator
von: Lushchik, V. D., et al.
Veröffentlicht: (2012)

A REVERSE MODE OF THREE-PHASE ASYNCHRONOUS MOTORS WITH HEXAPHASE WINDINGS
von: Lushchik, V. D., et al.
Veröffentlicht: (2014)

STUDY OF FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR UNITS TEMPERATURE VERSUS LOAD AND POWER SUPPLY TYPE
von: Vakaruk, T. V., et al.
Veröffentlicht: (2014)

ELECTROMAGNETIC CALCULATION OF THREE-PHASE ASYNCHRONOUS MOTORS WITH A SIX-PHASE WINDING
von: Lushchik, V. D., et al.
Veröffentlicht: (2013)

Optimization of loading modes of a controlled asynchronous electric drive
von: Kanov, L. N.
Veröffentlicht: (2013)

RESEARCH INTO VALVE-ENGINE TRANSDUCERS OF BRUSHLESS SYNCHRONOUS AND ASYNCHRONIZED MACHINES IN A CIRCUIT SIMULATION SYSTEM.
von: Galinovskiy, A. M.
Veröffentlicht: (2013)

SIMULATION OF PARALLEL WORK OF ASYNCHRONOUS GENERATORS IN AUTONOMOUS INSTALLATION FOR CHARGING BATTERIES
von: Holovko, V., et al.
Veröffentlicht: (2018)

Application of a wavelet neural network approach to detect stator winding short circuits in asynchronous machines
von: Sakhara, S., et al.
Veröffentlicht: (2023)

Fuzzy current analysis-based fault diagnostic of induction motor using hardware co-simulation with field programmable gate array
von: Aib, A., et al.
Veröffentlicht: (2023)

DEVELOPMENT OF A MATHEMATICAL MODEL FOR A FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR ROTOR TEMPERATURE FIELD ON THE BASIS OF DIFFERENTIAL EQUATIONS OF HEAT CONDUCTION
von: Ostashevskiy, N. A., et al.
Veröffentlicht: (2013)

COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
von: Prakht, V. A., et al.
Veröffentlicht: (2020)

An adaptive controller for power quality control in high speed railway with electric locomotives with asynchronous traction motors
von: Chaib Ras, A., et al.
Veröffentlicht: (2024)

INCREASING THE POWER OF THE WINDOW GENERATOR FOR THE DECREASE OF AIR LENGTH BETWEEN THE STATOR AND THE ROTOR
von: Holovko, V., et al.
Veröffentlicht: (2020)

A new stator flow-oriented control method based on type-2 fuzzy logic controllers for permanent magnet synchronous motors
von: Tabbakh, M., et al.
Veröffentlicht: (2026)

Thermomechanical loads of powerful turbogenerator stator winding insulation in the presence of water cooling defects
von: Kuchynskyi, K. A., et al.
Veröffentlicht: (2023)

Numerical-field analysis of differential leakage reactance of stator winding in three-phase induction motors
von: Milykh, V. I.
Veröffentlicht: (2025)

Modelling and performance testing of a digital over-current relay enhanced designed model
von: Sekhane, H., et al.
Veröffentlicht: (2022)

NUMERICAL-FIELD ANALYSIS OF THE CHARACTERISTICS OF A THREE-PHASE MAGNETIC FIELD INDUCTOR FOR THE TREATMENT OF VARIOUS SUBSTANCES WITH CURRENT STABILIZATION
von: Milykh, V. I., et al.
Veröffentlicht: (2019)

Taking into account dynamic influences on geotechnical structures in conditions of compaced urban buildings on the example of Kyiv
von: Ischenko, Yurii, et al.
Veröffentlicht: (2020)

Model of pulsating current traction motor taking into consideration magnetic losses in steel
von: Goolak, S., et al.
Veröffentlicht: (2021)

The high harmonic components of voltage and current of the asynchronous generator with short-circuited rotor winding in small wind and hydroelectric installations
von: Vasko, P., et al.
Veröffentlicht: (2016)

DOUBLE STATOR AXIAL FLUX MAGNETOELECTRIC GENERATOR FOR CONVERSION OF LOW POTENTIAL MECHANICAL ENERGY
von: Kovalenko , M., et al.
Veröffentlicht: (2024)

Model reference adaptive backstepping control of double star induction machine with extended Kalman sensorless control
von: Chaabane, H., et al.
Veröffentlicht: (2022)

Mathematical modeling of a wind-electric plant with an asynchronous generator
von: Kanov, L. N.
Veröffentlicht: (2012)

DESIGN COMPARISON OF SYNCHRONOUS PERMANENT MAGNET GENERATOR FOR WIND TURBINES
von: Permynov, Y., et al.
Veröffentlicht: (2019)

DESIGN RANGE CRITERIA IN DESIGNING OF CONTROLLED ASYNCHRONOUS MOTORS
von: Petrushin, V. S., et al.
Veröffentlicht: (2014)

Simulation of asynchronous modes of synchronous motors with capacitors in the excitation circuit
von: Malyar, V. S., et al.
Veröffentlicht: (2012)

MOTORSOLVE SOFTWARE PACKAGE: VERIFICATION OF PARAMETERS AND CHARACTERISTICS OF THE BRUSHLESS PERMANENT MAGNET MOTOR
von: Rymsha, V. V., et al.
Veröffentlicht: (2019)

Improved speed sensorless control for induction motor drives using rotor flux angle estimation
von: Tran, C. D., et al.
Veröffentlicht: (2025)

DEVELOPMENT TRENDS FOR ROLLING STOCK TRACTION MOTORS
von: Ustenko, A. V., et al.
Veröffentlicht: (2013)

NUMERICAL FIELD ESTIMATION OF TURBOGENERATOR STATOR WINDING SHORTENING EFFICIENCY
von: Milykh, V. I., et al.
Veröffentlicht: (2014)

Numerical-field analysis of active and reactive winding parameters and mechanical characteristics of a squirrel-cage induction motor
von: Milykh, V. I.
Veröffentlicht: (2023)