Heat transfer between liquid and air on surface with different shape of dimples
Profiling of the surface of sprinklers of film-type cooling towers in the form of dimples leads to a significant increase in heat transfer between the liquid and surrounding air as compared with a smooth surface. The shape of dimples on the surface of the flow affects the degree of flow turbulizatio...
Saved in:
| Date: | 2016 |
|---|---|
| Main Author: | Dubrovskyi V.V. |
| Format: | Article |
| Language: | Ukrainian |
| Published: |
General Energy Institute of the National Academy of Sciences of Ukraine
2016
|
| Subjects: | |
| Online Access: | https://systemre.org/index.php/journal/article/view/93 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | System Research in Energy |
Institution
System Research in EnergySimilar Items
Influence of the geometrical characteristics of the surface with spherical wells on heat exchange of water and air
by: Dubrovskyi V.V., et al.
Published: (2015)
by: Dubrovskyi V.V., et al.
Published: (2015)
Heat transfer on profiled surfaces of industrial film-type cooling towers
by: Dubrovskyi V.V., et al.
Published: (2014)
by: Dubrovskyi V.V., et al.
Published: (2014)
A film-type cooling tower with a profiled sprinklers surface
by: Dubrovskyi V.V.
Published: (2016)
by: Dubrovskyi V.V.
Published: (2016)
Calculation of liquid cooling in film cooling towers with a profiled sprinkler surface
by: Dubrovskyi V.V.
Published: (2017)
by: Dubrovskyi V.V.
Published: (2017)
Possibility of Enhancing the Efficiency of Operation of Film Cooling Towers by Means of the Use of Sprinklers with Profiled Surface
by: Dubrovskyi V.V., et al.
Published: (2011)
by: Dubrovskyi V.V., et al.
Published: (2011)
Heat transfer of a liquid film flowing over a flat surface with spherical indentations with air
by: Dubrovskyi V.V., et al.
Published: (2008)
by: Dubrovskyi V.V., et al.
Published: (2008)
Effect of the nonuniformity of water-concentration distribution on the cooling of circulation water in a drip-type cooling tower
by: Shraiber O.A., et al.
Published: (2012)
by: Shraiber O.A., et al.
Published: (2012)
Influence of the relative velocity between water and air on their heat transfer at the flow of a film along a profiled surface
by: Dubrovskyi V.V., et al.
Published: (2012)
by: Dubrovskyi V.V., et al.
Published: (2012)
Optimization of the cooling mode of circulating water in atomizing cooling towers
by: Shraiber O.A., et al.
Published: (2007)
by: Shraiber O.A., et al.
Published: (2007)
High-efficiency heat-exchange surface for film processes
by: Dubrovskyi V.V.
Published: (2017)
by: Dubrovskyi V.V.
Published: (2017)
The energetic efficiency device for water atomization by low pressure centrifugal sprayers
by: Pidvysotskyi O.M., et al.
Published: (2001)
by: Pidvysotskyi O.M., et al.
Published: (2001)
Heat transfer between liquid and air on surface with different shape of dimples
by: V. V. Dubrovskyi
Published: (2016)
by: V. V. Dubrovskyi
Published: (2016)
USE OF GEOTHERMAL COOLING BY AIR CONDITIONING SYSTEMS AS A MEANS OF REDUCING THE LOAD ON POWER SUPPLY SYSTEMS IN THE WARM SEASON
by: Lysak , O.
Published: (2025)
by: Lysak , O.
Published: (2025)
Heat transfer in film-type cooling towers with a profiled surface of sprinklers under conditions of the longitudinal and cross direction of air flow
by: Dubrovskyi V.V., et al.
Published: (2014)
by: Dubrovskyi V.V., et al.
Published: (2014)
Enhancement of the cooling ability of a cooling tower at the expense of increasing the cooling surface in the course of liquid atomization by centrifugal atomizers
by: Dubrovskyi V.V., et al.
Published: (2006)
by: Dubrovskyi V.V., et al.
Published: (2006)
A study of the hydraulic characteristics of centrifugal atomizers of cooling towers and ways of their improvement
by: Dubrovskyi V.V., et al.
Published: (2008)
by: Dubrovskyi V.V., et al.
Published: (2008)
APPLIED METHODOLOGY OF COMPLEX APPLICATION OF FREE COOLING AND HEAT PUMP TECHNOLOGIES
by: Perepelytsia , I., et al.
Published: (2024)
by: Perepelytsia , I., et al.
Published: (2024)
Heat recovery of the waste gas boilers, in combined heat and mass transfer apparatus
by: Tuz V.E., et al.
Published: (2011)
by: Tuz V.E., et al.
Published: (2011)
COMPUTER MODELING ANALYSIS OF PHOTOVOLTAIC (PV) MODULES WITHOUT AND WITH INTEGRATED COOLING SYSTEMS
by: Axtamov , T. Z., et al.
Published: (2025)
by: Axtamov , T. Z., et al.
Published: (2025)
An engineering method for calculating the abrasive wear of heat-transfer surfaces of a boiler
by: Yatsenko V.P., et al.
Published: (2009)
by: Yatsenko V.P., et al.
Published: (2009)
Usage the transfer properties in heating and evaporable cooling of the fluid film during design stage of heat and mass exchangers
by: Tuz V.E., et al.
Published: (2014)
by: Tuz V.E., et al.
Published: (2014)
Формирование слоистой структуры в плёнках никеля при электроосаждении импульсным током
by: Штапенко, Э.Ф., et al.
Published: (2019)
by: Штапенко, Э.Ф., et al.
Published: (2019)
Повышение качества поверхностных электроэрозионно-легированных слоёв комбинированными покрытиями и поверхностным пластическим деформированием. I. Особенности формирования комбинированных электроэрозионных покрытий на специальных сталях и сплавах
by: Тарельник, В.Б., et al.
Published: (2019)
by: Тарельник, В.Б., et al.
Published: (2019)
Modeling of the abrasive wear of convective heat transfer surfaces of a boiler
by: Shraiber O.A., et al.
Published: (2008)
by: Shraiber O.A., et al.
Published: (2008)
DEVELOPMENT OF A SYSTEM FOR GENERATING HEAT AND COLD FOR THE NEEDS OF PHARMACEUTICAL COMPANIES
by: Perepelytsia , I., et al.
Published: (2025)
by: Perepelytsia , I., et al.
Published: (2025)
Increasing the efficiency of industrial mazut-gas boilers
by: Tuz V.E., et al.
Published: (2011)
by: Tuz V.E., et al.
Published: (2011)
Influence of the geometric characteristics of a surface with spherical dimples on heat transfer from water to air
by: V. V. Dubrovskyi, et al.
Published: (2015)
by: V. V. Dubrovskyi, et al.
Published: (2015)
DETERMINATION HEAT TRANSFER COEFFICIENTS UV AND UV FOR PV PLANT`S MODELING USING PVSYST SOFTWARE
by: Bordakov, M.
Published: (2021)
by: Bordakov, M.
Published: (2021)
Intensification of heat transfer in liquid heat exchangers with dimple-pin finning
by: V. E. Trofimov, et al.
Published: (2016)
by: V. E. Trofimov, et al.
Published: (2016)
R-functions and chevron surfaces in machine building
by: Шейко, Т. И., et al.
Published: (2017)
by: Шейко, Т. И., et al.
Published: (2017)
R-functions and chevron surfaces in machine building
by: Шейко, Т. И., et al.
Published: (2017)
by: Шейко, Т. И., et al.
Published: (2017)
Analysis of technical requirements for heating mains in geothermal heating supply systems
by: Oliinichenko, V.
Published: (2016)
by: Oliinichenko, V.
Published: (2016)
Thermomechanical loads of powerful turbogenerator stator winding insulation in the presence of water cooling defects
by: Kuchynskyi, K. A., et al.
Published: (2023)
by: Kuchynskyi, K. A., et al.
Published: (2023)
Aerodynamics Features of Heat Transfer Surfaces with Cylindrical Dimples
by: G. V. Kovalenko
Published: (2014)
by: G. V. Kovalenko
Published: (2014)
Experimental investigation of the liquid outflow process from centrifugal atomizers intended for cooling towers
by: Dubrovskyi V.V., et al.
Published: (2001)
by: Dubrovskyi V.V., et al.
Published: (2001)
Analysis of dimple shape on fractographic heat-resistant steel images
by: I. B. Ivasenko, et al.
Published: (2018)
by: I. B. Ivasenko, et al.
Published: (2018)
Structural investigations of photosensitive composites «Au Nps/Selenium film»
by: Рубіш, В. М., et al.
Published: (2020)
by: Рубіш, В. М., et al.
Published: (2020)
The use of shape memory alloys in fuses for the protection of electrical installations
by: Kozyrskyi, V. V., et al.
Published: (2026)
by: Kozyrskyi, V. V., et al.
Published: (2026)
TECHNOLOGICAL PARAMETERS OF THE COOLING MODE OF POLYMER INSULATION OF POWER CABLES
by: Bezprozvannych, G. V., et al.
Published: (2019)
by: Bezprozvannych, G. V., et al.
Published: (2019)
Mantle heat flow in the territory of Ukraine
by: Gordienko, V.V., et al.
Published: (2025)
by: Gordienko, V.V., et al.
Published: (2025)
Similar Items
-
Influence of the geometrical characteristics of the surface with spherical wells on heat exchange of water and air
by: Dubrovskyi V.V., et al.
Published: (2015) -
Heat transfer on profiled surfaces of industrial film-type cooling towers
by: Dubrovskyi V.V., et al.
Published: (2014) -
A film-type cooling tower with a profiled sprinklers surface
by: Dubrovskyi V.V.
Published: (2016) -
Calculation of liquid cooling in film cooling towers with a profiled sprinkler surface
by: Dubrovskyi V.V.
Published: (2017) -
Possibility of Enhancing the Efficiency of Operation of Film Cooling Towers by Means of the Use of Sprinklers with Profiled Surface
by: Dubrovskyi V.V., et al.
Published: (2011)