СРАВНЕНИЕ ПОТЕРЬ МОЩНОСТИ В КЛЮЧАХ ПОВЫШАЮЩИХ КРИП С ПАРАЛЛЕЛЬНЫМ И ПОСЛЕДОВАТЕЛЬНЫМ РЕЗОНАНСНЫМИ КОНТУРАМИ

In this work the calculation of energy indicators of electromagnetic processes in power switches of boost quasi-resonant pulse converters (QRPC) with parallel and series resonant circuits is performed. The calculations were performed using the operator method and the method of stitching the results...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2016
Автори та афіліації:
  • Ю.А. Денисов — Чернігівський Національний Технологічний Університет, вул. Шевченка, 95, Чернігів, 14035, Україна
  • А.Н. Городний — Чернігівський Національний Технологічний Університет, вул. Шевченка, 95, Чернігів, 14035, Україна
  • В.В. Гордиенко — Чернігівський Національний Технологічний Університет, вул. Шевченка, 95, Чернігів, 14035, Україна
  • С.А. Степенко — Чернігівський Національний Технологічний Університет, вул. Шевченка, 95, Чернігів, 14035, Україна
  • Р.Д. Ершов — Чернігівський Національний Технологічний Університет, вул. Шевченка, 95, Чернігів, 14035, Україна
  • Т.М. Теплая — Чернігівський Національний Технологічний Університет, вул. Шевченка, 95, Чернігів, 14035, Україна
Ключові слова:keywords
Автори: Денисов , Ю.А., Городний, А.Н., Гордиенко, В.В., Степенко, С.А., Ершов, Р.Д., Теплая, Т.М.
Формат: Стаття
Мова:Українська
Опубліковано: Інститут електродинаміки НАН України, Київ 2016
Теми:
Онлайн доступ:https://techned.org.ua/index.php/techned/article/view/851
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Technical Electrodynamics
Завантажити файл: Pdf

Репозитарії

Technical Electrodynamics
Опис
Резюме:In this work the calculation of energy indicators of electromagnetic processes in power switches of boost quasi-resonant pulse converters (QRPC) with parallel and series resonant circuits is performed. The calculations were performed using the operator method and the method of stitching the results of change of transistor switch current and voltage. For each switching interval the analytical expressions were obtained, which allow to estimate the energy losses at each interval, as well as total losses. The findings made it possible to compare two converters with the same parameters of supply, power stage and load depending on the connection of the resonant circuit. References 4, table 1, figures 4.
DOI:10.15407/techned2016.04.044