Роль механiчних напружень при iоннiй імплантацiї твердих розчинiв CdHgTe

The properties of n-CdxHg1 xTe/CdZnTe (x = 0.223) structures implanted with B+ and Ag+ ions with an energy of 100 keV to a dose of 3 x 10^13 cm^-2 are studied. The software package TRIM_2008 was applied to simulate the ion implantation process. The surface morphology of heterostructures and their op...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Datum:2018
Hauptverfasser: Smirnov, A. B., Lytvyn, O. S., Morozhenko, V. A., Savkina, R. K., Smoliy, M. I., Udovytska, R. S., Sizov, F. F.
Format: Artikel
Sprache:English
Ukrainian
Veröffentlicht: Publishing house "Academperiodika" 2018
Schlagworte:
Online Zugang:https://ujp.bitp.kiev.ua/index.php/ujp/article/view/2018364
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:Ukrainian Journal of Physics

Institution

Ukrainian Journal of Physics
Beschreibung
Zusammenfassung:The properties of n-CdxHg1 xTe/CdZnTe (x = 0.223) structures implanted with B+ and Ag+ ions with an energy of 100 keV to a dose of 3 x 10^13 cm^-2 are studied. The software package TRIM_2008 was applied to simulate the ion implantation process. The surface morphology of heterostructures and their optical, mechanical and electrical properties are studied. It is found that the ion irradiation of specimens gives rise to the formation of a characteristic relief on their surface, as well as a layer in the near-surface region, where the optical parameters differ from those in the matrix. The implantation of CdxHg1 xTe epitaxial layers with boron and silver ions with the same energy and to the same dose brings about the formation of a damaged layer, substantially non-uniform by the thickness and the damage character, with maximum mechanical stresses that differ by two orders of magnitude. The values of the crystal lattice contraction coefficient b and the mechanical stresses omax in the region of radiation-induced disordering in the solid solution are determined. The influence of mechanical stresses in the doped layer on the defect redistribution and the formation of properties of Cd0:223Hg0:777Te after the implantation is discussed.