Buchumschlag

THE DETERMINATION OF PARAMETERS OF A REACTOR-MIXER WITH A DISK INJECTOR

Diesel biofuel is mainly received in the process of transesterification, due to the interaction of vegetal oil and methyl spirit under catalysts presence. Methyl spirit, catalyst and oil create a multiphase medium in which the reaction process is going slower. To speed up the transesterification rea...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	Yarosh, Y., Kukharets, S., Tsyvenkova, N.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Institute of Renewable Energy National Academy of Sciences of Ukraine 2018
Schlagworte:	diesel biofuel transesterification hydraulic pump Reinold’s number hydraulic mixing energy efficiency
Online Zugang:	https://ve.org.ua/index.php/journal/article/view/151
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Vidnovluvana energetika

Institution

Vidnovluvana energetika

Ähnliche Einträge

The determination of parameters of a reactor-mixer with a disk injector
von: Y. Yarosh, et al.
Veröffentlicht: (2018)

ANALYSIS OF ENERGY PARAMETERS OF A CLOSED-CYCLE PUMPED STORAGE HYDROPOWER PLANT
von: Golovko , V., et al.
Veröffentlicht: (2025)

USE OF BIOFUELS BY PUBLIC ROAD TRANSPORT AS ONE OF THE INSTRUMENTS TO STIMULATE THE DEMAND FOR BIOFUEL IN UKRAINE
von: Trypolska, G.
Veröffentlicht: (2019)

Еstimating the Chézy roughness coefficient as a characteristic of hydraulic resistance to flow in river channels: a general overview, existing challenges, and ways of their overcoming
von: Stefanyshyn, Dmytro V., et al.
Veröffentlicht: (2021)

Research of energy balance regularities in a complex closed-loop hydraulic grid within a technical economic model of water supply system
von: Kaplin M.I., et al.
Veröffentlicht: (2011)

AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 45: TRADITIONAL POWER ENGINEERING. HYDRAULIC POWER PLANTS: STATE AND PROSPECTS OF THEIR DEVELOPMENT
von: Baranov, M. I.
Veröffentlicht: (2018)

ENERGY EFFICIENCY OF WIND-HYDRO PUMPING STATION SIGNIFICANT POWER
von: Vasko, P., et al.
Veröffentlicht: (2020)

MODELING DYNAMICS LOADING MODES WORK OF THE HYDRO-PUMP STATION WITH THE ELECTRIC DRIVE FROM POWER SUPPLY OF THE WIND ELECTRIC INSTALLATION WITH THE SYNCHRONOUS GENERATOR
von: Vasko, P., et al.
Veröffentlicht: (2020)

THE POTENTIAL AND WAYS OF AGRICULTURAL BIOMASS HYDROGEN PRODUCTION ASSESSMENT
von: Kukharets, S., et al.
Veröffentlicht: (2020)

Microseismic monitoring technique for hydraulic fracturing of a formation for hydrocarbon deposits
von: Kobrunov, Serhii, et al.
Veröffentlicht: (2024)

RESULTS OF THE XXIV INTERNATIONAL CONFERENCE «RENEWABLE ENERGY AND ENERGY EFFICIENCY IN THE XXI CENTURY»: SECTION «BIOENERGY»
von: Chetveryk, H., et al.
Veröffentlicht: (2023)

IMPACT OF A HYDRAULIC DAMPER ON TWO-POSITION POLARIZED ACTUATOR DYNAMICS
von: Baida, E. I.
Veröffentlicht: (2013)

A study of the hydraulic characteristics of centrifugal atomizers of cooling towers and ways of their improvement
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2008)

MODERN APPROACHES TO THE SOLUTION OF THE PROBLEM OF INCREASING THE ENERGY EFFICIENCY OF SEED GRAIN DRYING
von: Pazіuk, V.
Veröffentlicht: (2021)

THE EFFECTS OF NANOADDITIVES ON A SINGLE CYLINDER DIESEL ENGINE USING PROSOPIS JULIFLORA BIODIESEL
von: Arunachalam, V., et al.
Veröffentlicht: (2024)

Methodological Platform for Determining Energy Efficiency Indicators of a Complex System
von: Eutukhova, Tatiana, et al.
Veröffentlicht: (2023)

ОСОБЛИВОСТІ ЗАСТОСУВАННЯ ЧИСЛОВОГО МЕТОДУ РІШЕННЯ МАТЕМАТИЧНОЇ МОДЕЛІ НЕСТАЦІОНАРНИХ ЕЛЕКТРОМЕХАНІЧНИХ ПРОЦЕСІВ У СИСТЕМІ ВІТРОЕЛЕКТРИЧНА УСТАНОВКА – ЕЛЕКТРОГІДРАВЛІЧНИЙ НАСОС СТАНЦІЇ ОПРІСНЕННЯ МОРСЬКОЇ ВОДИ
von: Vasko, P., et al.
Veröffentlicht: (2023)

Computer-aided Design of Centrifugal Pump Hydraulics
von: Косторной, А. С.
Veröffentlicht: (2015)

Computer-aided Design of Centrifugal Pump Hydraulics
von: Косторной, А. С.
Veröffentlicht: (2015)

STUDY OF THE ENERGY EFFICIENCY OF THE ELECTROMECHANICAL SYSTEM OF SMALL GS IN SHUNTING MODES OF OPERATION BY MEANS OF COMPLEX MODELLING
von: Popovych , O., et al.
Veröffentlicht: (2024)

Problems and perspectives for small and medium reactor utilization
von: Kovetskaya M.M., et al.
Veröffentlicht: (2003)

Analysis of the payback period of a modernized pump unit with induction electric motors of advanced energy efficiency classes
von: Goman, V.V., et al.
Veröffentlicht: (2021)

A method of designing flow parts of the high-pressure shaft fan and blower fans
von: Гриценко, Н. И., et al.
Veröffentlicht: (2016)

A method of designing flow parts of the high-pressure shaft fan and blower fans
von: Гриценко, Н. И., et al.
Veröffentlicht: (2016)

RENEWABLE ENERGY SOURCES IN HEAT PUMPS FOR ENERGY EFFICIENT LOW-TEMPERATURE DRYING OF SEED GRAIN
von: Sniezhkin , Yu., et al.
Veröffentlicht: (2025)

ELECTRICITY AND HEAT SUPPLY TECHNOLOGIES FOR INCREASING THE ENERGY INDEPENDENCE OF CERTAIN TERRITORIAL COMMUNITIES
von: Stanytsina, Valentyna, et al.
Veröffentlicht: (2023)

Selection of System Characteristic of Turbo-Compressor Package Based on Efficiency Analysis according to Full-Scale Test Results. P. III. Efficiency Research of Basic Systems of Turbo-Compressor Package GPA-C-6,3A/56-1,45 on Full-Scale Test Results
von: Щербаков, Н. С., et al.
Veröffentlicht: (2017)

Selection of System Characteristic of Turbo-Compressor Package Based on Efficiency Analysis according to Full-Scale Test Results. P. III. Efficiency Research of Basic Systems of Turbo-Compressor Package GPA-C-6,3A/56-1,45 on Full-Scale Test Results
von: Щербаков, Н. С., et al.
Veröffentlicht: (2017)

EVALUATION OF THE EFFICIENCY OF USING THE THERMAL POTENTIAL OF THE ENVIRONMENT AND THE TOP LAYERS OF THE LAND OF UKRAINE
von: Morozov, Yu., et al.
Veröffentlicht: (2020)

RENEWABLE ENERGY SOURCES IN ELECTRIC-POWER INDUSTRY OF NAKHCHIVAN AUTONOMOUS REPUBLIC
von: Rzayev, M. A., et al.
Veröffentlicht: (2018)

Evaluation of the effectiveness of energy technologies by the methodology of determination of total energy costs
von: Bilodid V.D.
Veröffentlicht: (2012)

Data arrangements to train an artificial neural network within solving the tasks for calculating the Chézy roughness coefficient under uncertainty of parameters determining the hydraulic resistance to flow in river channels
von: Khodnevych, Yaroslav V., et al.
Veröffentlicht: (2022)

Determination of parameters and basic dimensions of the generator for low power tidal plants (up to 1000 kW)
von: Permynov, Y., et al.
Veröffentlicht: (2017)

THE IMPACT OF DIESEL AND VARIOUS BLENDS OF BIODIESEL ON PERFORMANCE, EMISSIONS, AND COMBUSTION IN DI DIESEL ENGINES
von: Sekharraj , K., et al.
Veröffentlicht: (2026)

Optimisation of Agricultural Crop Allocation in Sustainable Biofuel Production and Energy Security Strategies
von: Tokarchuk, Dina, et al.
Veröffentlicht: (2026)

ENERGY EFFICIENCY OF THE SHALLOW AQUIFERS UTILIZATION FOR THE DISTRICT HEATING AND COOLING
von: Morozov, Yu., et al.
Veröffentlicht: (2019)

A natural method of evaluating the permeability of the water-collector skeleter and optimization of the debit of fountain wells
von: Ludanov, K., et al.
Veröffentlicht: (2017)

ANALYSIS OF ELECTRICITY CONSUMPTION OF INDUCTION MOTORS OF IE1 AND IE2 EFFICIENCY CLASSES IN A 11 kW PUMP INSTALLATION
von: Oshurbekov, S. Kh., et al.
Veröffentlicht: (2020)

SINGLE-CIRCUIT AND DUAL-CIRCUIT HEAT PUMP SYSTEMS. INTERRELATION OF PHYSICAL PROCESSES AND EFFICIENCY
von: Goshovskyi, S., et al.
Veröffentlicht: (2019)

Test rig of OJSC «Turboatom» for physical simulation of hydrodynamic process in water passages of model Kaplan hydroturbines
von: Линник, А. В., et al.
Veröffentlicht: (2014)