Buchumschlag

DESIGN PERMANENT MAGNET WINDGENERATOR OF INCREASED POWER (600÷3600) KW

В статье на основе оценки характеристик некоторых ветрозон Украины [1] и применяемой при проектировании скорости ветра за рубежом проведено сравнение основных параметров ветрогенераторов. Для этого по определенному алгоритму [4-9] был рассчитан ряд синхронных генераторов мощностью от 600 до 3600 кВт...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
Hauptverfasser:	Permynov, Y., Monakhov, E., Volkov, L.
Format:	Artikel
Sprache:	Ukrainisch
Veröffentlicht:	Institute of Renewable Energy National Academy of Sciences of Ukraine 2020
Schlagworte:	synchronous generators asynchronous generators wind generator power rotation speed electromagnetic torque permanent mag-nets slots per pole and phase slot filling coefficient.
Online Zugang:	https://ve.org.ua/index.php/journal/article/view/243
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Vidnovluvana energetika

Institution

Vidnovluvana energetika

Ähnliche Einträge

FEATURES OF DESIGN THE PERMANENT MAGNET WINDGENERATOR OF HIGH POWER (600÷3600) kW
von: Permynov, Y., et al.
Veröffentlicht: (2020)

DESIGN COMPARISON OF SYNCHRONOUS PERMANENT MAGNET GENERATOR FOR WIND TURBINES
von: Permynov, Y., et al.
Veröffentlicht: (2019)

Design permanent magnet windgenerator of increased power (600ч3600) kW
von: Ju. N. Perminov, et al.
Veröffentlicht: (2020)

Features of design the permanent magnet windgenerator of high power (600÷3600) kW
von: Ju. N. Perminov, et al.
Veröffentlicht: (2020)

COMPARISON OF PARAMETERS OF ASYNCHRONOUS AND SYNCHRONOUS ELECTRIC GENERATORS WITH PERMANENT MAGNETS EXCITATION FOR WIND TURBINES
von: Permynov, Y., et al.
Veröffentlicht: (2021)

OPERATION OF PERMANENT MAGNET SYNCHRONOUS GENERATOR APPLIED TO THE GRID CONNECTED WIND TURBINES
von: Permynov, Yu., et al.
Veröffentlicht: (2022)

The influence of the design of the stator winding of a synchronous-reactive generator on increasing its energy efficiency
von: Iegorov, O. B., et al.
Veröffentlicht: (2025)

Algorithm for calculating synchronous end design generators with located at stator ends two magnetic systems for wind turbines
von: Permynov, Y., et al.
Veröffentlicht: (2016)

OPERATION OF THE SYNCHRONOUS GENERATOR WITH PERMANENT MAGNETS DURING THE MAGNETIZATION OF A SIDE CAPACITY
von: Kovalenko, I
Veröffentlicht: (2021)

Development of the heat generator calculation method with permanent magnets for wind turbines
von: Permynov, Y., et al.
Veröffentlicht: (2017)

SMALL HYDROPOWER PLANTS AND EFFECTIVE HYDROPOWER UNITS FOR THESE PLANTS
von: Permynov, Y., et al.
Veröffentlicht: (2018)

Mitigation of cogging torque in surface permanent magnet brushless DC motor using slot opening shift
von: Patel, A. N., et al.
Veröffentlicht: (2026)

APPROXIMATE SUBSTITUTION ELECTRICAL ЕQUIVALENT CIRCUIT OF EXPLICIT POLE SYNCHRONOUS GENERATOR FOR ANALYSIS OF LOADING OPERATING MODES AUTONOMOUS WIND-ELECTRIC AND HYDROELECTRIC INSTALLATIONS
von: Vasko, P.
Veröffentlicht: (2020)

Control of an autonomous wind energy conversion system based on doubly fed induction generator supplying a non-linear load
von: L’Hadj Said, M., et al.
Veröffentlicht: (2025)

SYNCHRONOUS OSCILLATIONS IN VAN DER POL GENERATOR WITH MODULATED NATURAL FREQUENCY
von: Nimets, A. Yu., et al.
Veröffentlicht: (2016)

Determination of parameters and basic dimensions of the generator for low power tidal plants (up to 1000 kW)
von: Permynov, Y., et al.
Veröffentlicht: (2017)

SIMULATION OF PARALLEL WORK OF ASYNCHRONOUS GENERATORS IN AUTONOMOUS INSTALLATION FOR CHARGING BATTERIES
von: Holovko, V., et al.
Veröffentlicht: (2018)

MATHEMATICAL FIELD MODELS OF BRUSHLESS DC MOTORS WITH PERMANENT MAGNETS AND THEIR COMPARATIVE ANALYSIS
von: Matyuschenko, A. V.
Veröffentlicht: (2015)

Influence of permanent magnet parameters on the performances of claw pole machines used in hybrid vehicles
von: Kimouche, A., et al.
Veröffentlicht: (2024)

A novel scheme for control by active and reactive power utilized in gearless variable speed wind turbine system with PMSG connected to the grid
von: Ghanem, S., et al.
Veröffentlicht: (2022)

INCREASING THE POWER OF THE WINDOW GENERATOR FOR THE DECREASE OF AIR LENGTH BETWEEN THE STATOR AND THE ROTOR
von: Holovko, V., et al.
Veröffentlicht: (2020)

New application of artificial neural network-based direct power control for permanent magnet synchronous generator
von: Akkouchi, K., et al.
Veröffentlicht: (2021)

ELECTRIC GENERATOR IN THE RECUPERATION SYSTEM OF THE ENERGY FROM MECHANICAL OSCILLATIONS IN VEHICLES
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2018)

Direct torque control based on second order sliding mode controller for three-level inverter-fed permanent magnet synchronous motor: comparative study
von: Guezi, A., et al.
Veröffentlicht: (2022)

Performance evaluation and analysis by simulation for sliding mode control with speed regulation of permanent magnet synchronous motor drives in electric vehicles
von: Senani, F., et al.
Veröffentlicht: (2025)

AMELIORATE DIRECT POWER CONTROL OF STANDALONE WIND ENERGY GENERATION SYSTEM BASED ON PERMANENT MAGNET SYNCHRONOUS GENERATOR BY USING FUZZY LOGIC CONTROL
von: Lebied, R., et al.
Veröffentlicht: (2020)

MATHEMATICAL SIMULATION OF AUTONOMOUS WIND INSTALLATION WITH SYNCHRONOUS MAGNETO-ELECTRIC TYPE GENERATOR
von: Golovko, V., et al.
Veröffentlicht: (2020)

STUDY OF THE METHOD AND ADJUSTMENT RANGE OF A MAGNETO-ELECTRIC SYNCHRONOUS GENERATOR WITH A VARIABLE CONDUCTANCE MAGNETIC SHUNT
von: Chumak, V., et al.
Veröffentlicht: (2023)

Smart current control of the wind energy conversion system based permanent magnet synchronous generator using predictive and hysteresis model
von: Zine, H. K. E., et al.
Veröffentlicht: (2024)

Evolution of hydrocarbon deposits in the South Caspian Basin
von: Seidov, V.M., et al.
Veröffentlicht: (2023)

Improve of the direct torque control strategy applied to a multi-phase interior permanent magnet synchronous motor using a super twisting sliding mode algorithm
von: Mehedi, F., et al.
Veröffentlicht: (2025)

SENSORLESS DIRECT POWER CONTROL FOR THREE-PHASE GRID SIDE CONVERTER INTEGRATED INTO WIND TURBINE SYSTEM UNDER DISTURBED GRID VOLTAGES
von: Boukhechem, I., et al.
Veröffentlicht: (2020)

Association smooth-pole dual open-end windings permanent magnet synchronous machine with cascaded 2-level inverters for improved performances
von: Nayli, A., et al.
Veröffentlicht: (2026)

Slot opening displacement technique for cogging torque reduction of axial flux brushless DC motor for electric two-wheeler application
von: Patel, A. N.
Veröffentlicht: (2023)

Investigation of biogas generation potential during digestion of food waste
von: Matveev, Yu., et al.
Veröffentlicht: (2016)

ENERGY EFFICIENCY OF WIND-HYDRO PUMPING STATION SIGNIFICANT POWER
von: Vasko, P., et al.
Veröffentlicht: (2020)

MODELING DYNAMICS LOADING MODES WORK OF THE HYDRO-PUMP STATION WITH THE ELECTRIC DRIVE FROM POWER SUPPLY OF THE WIND ELECTRIC INSTALLATION WITH THE SYNCHRONOUS GENERATOR
von: Vasko, P., et al.
Veröffentlicht: (2020)

ANALYSIS AND OPTIMIZATION OF THE OPERATING RANGE OF A MONOPOLE ANTENNA INVOLVING ‘MEANDER’ TYPE SLOT INHOMOGENEITIES
von: Lytvynenko, L. M., et al.
Veröffentlicht: (2023)

OPERATOR METHOD IN THE SCALAR WAVE DIFFRACTION BY AXIALLY-SYMMETRIC DISCONTINUITIES IN THE SCREEN
von: Kaliberda, M. E., et al.
Veröffentlicht: (2018)

ANALYSIS OF THERMAL STATE OF TRACTION BRUSHLESS PERMANENT MAGNET MOTOR FOR MINE ELECTRIC LOCOMOTIVE
von: Matyuschenko, A. V.
Veröffentlicht: (2016)