DETERMINATION OF THE FEATURES OF THERMAL DECOMPOSITION OF SUNFLOWER HUSK IN A FLUIDIZED BED

Sunflower husk (SH) is a plant waste fuel. The carbon content in different samples of SH ranges from 40.5% to 54.5% in an operating state, with ash content ranging from 1.5% to 8.5%, moisture content ranging from 6.9% to 9.5%, chlorine content ranging from 0.05% to 0.3%, and lower heating value rang...

Повний опис

Збережено в:
Бібліографічні деталі
Видавець:Institute of Renewable Energy National Academy of Sciences of Ukraine
Дата:2024
Автори: Haponych, L., Topal , O., Holenko , I., Kobzar , S.
Формат: Стаття
Мова:Ukrainian
Опубліковано: Institute of Renewable Energy National Academy of Sciences of Ukraine 2024
Теми:
Онлайн доступ:https://ve.org.ua/index.php/journal/article/view/464
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!

Репозиторії

Vidnovluvana energetika
Опис
Резюме:Sunflower husk (SH) is a plant waste fuel. The carbon content in different samples of SH ranges from 40.5% to 54.5% in an operating state, with ash content ranging from 1.5% to 8.5%, moisture content ranging from 6.9% to 9.5%, chlorine content ranging from 0.05% to 0.3%, and lower heating value ranging from 14.5 MJ/kg to 20.5 MJ/kg. These characteristics make it a suitable substitute for fossil fuels in power boilers. Waste-to-energy (WTE) technologies are rapidly developing worldwide, offering the potential for generating renewable energy from waste, including agricultural and food industry waste such as SH. According to our estimates, Ukraine has an annual energy potential of approximately 3.4 million tons of SH or about two million tons of fuel equivalent. Approximately half of this volume is currently being burned in oil extraction plants' boilers; however, up to one million tons of SH end up in landfills annually, resulting in significant energy losses. To develop new and improve existing WTE technologies that utilize SH as a fuel source, it's essential to understand the thermal processing characteristics of SH under conditions similar to those found in different zones within real power boilers - specifically the heating of fuel particles at rates up to 500 °C/s over a temperature range of 500–1000 °C. In this study, we aimed to investigate the thermal processing characteristics by subjecting SH particles within a laboratory fluidized bed reactor to high-speed heating within the aforementioned temperature range. During rapid heating between 500–1000 °C temperatures range, SH particles undergo conversion into volatile compounds and solid carbon residue. Two distinct stages can be observed on the dynamic yield curves for volatiles. The release and burnout of volatiles occurs during the first stage while the second stage involves coke ash residue burnout. We obtained empirical temperature-dependents for total heat treatment time and carbon residue burnout time under fast heating conditions in the investigated temperature range. The stage of carbon residue combustion is the most enduring and determines the overall duration of thermal treatment. This stage determines the degree of fuel transformation, especially in cases where low-reactivity carbon residue enters the low-temperature combustion chamber area of the boiler. The obtained regularities have practical significance in designing combustion chambers for thermal processing of sunflower husk.