Buchumschlag

RNN-INTEGRATED MODEL PREDICTIVE CONTROL FOR FUEL CELL AND SOLAR-POWERED HYBRID ELECTRIC VEHICLES

This paper presents an innovative Hybrid Electric Vehicle (HEV) configuration utilizing a fuel cell as the primary energy source and an onboard Photovoltaic (PV) array as a supplementary source. The system features an advanced Model Predictive Control (MPC) enhanced by a Recurrent Neural Network (RN...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2024
Hauptverfasser:	Divya, G., Venkata Padmavathi , S.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Institute of Renewable Energy National Academy of Sciences of Ukraine 2024
Schlagworte:	Hybrid Electric Vehicle (HEV) Recurrent Neural Network (RNN) Fuel Cell Induction Motor Control Electro-lyzer Renewable Energy Integration Speed Control MATLAB/SIMULINK Simulation.
Online Zugang:	https://ve.org.ua/index.php/journal/article/view/483
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Vidnovluvana energetika

Institution

Vidnovluvana energetika

Ähnliche Einträge

Fractional-based iterative learning-optimal model predictive control of speed induction motor regulation for electric vehicles application
von: Nemouchi, B., et al.
Veröffentlicht: (2024)

Efficiency enhancement strategy implementation in hybrid electric vehicles using sliding mode control
von: Ibrar, A., et al.
Veröffentlicht: (2023)

Performance evaluation and analysis by simulation for sliding mode control with speed regulation of permanent magnet synchronous motor drives in electric vehicles
von: Senani, F., et al.
Veröffentlicht: (2025)

Optimal performance assessment of intelligent controllers used in solar-powered electric vehicle
von: Kumar, R. S., et al.
Veröffentlicht: (2023)

Development and study of a microprocessor automatic control system for a mono-switch tie type with a linear inductive electric motor and a discrete speed controller
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2022)

Ensuring service continuity in electric vehicles with vector control and linear quadratic regulator for dual star induction motors
von: Darsouni, Z., et al.
Veröffentlicht: (2025)

Implementation of a new flux rotor based on model reference adaptive system for sensorless direct torque control modified for induction motor
von: Saifi, R.
Veröffentlicht: (2023)

Tilt-fractional order proportional integral derivative control for DC motor using particle swarm optimization
von: Amieur, T., et al.
Veröffentlicht: (2023)

Recurrent neural network model for music generation
von: Komarskiy, O.C., et al.
Veröffentlicht: (2022)

Model reference adaptive system speed estimator based on type-1 and type-2 fuzzy logic sensorless control of electrical vehicle with electrical differential
von: Khemis, A., et al.
Veröffentlicht: (2023)

Electric drive vehicle based on sliding mode control technique using a 21-level asymmetrical inverter under different operating conditions
von: Djafer, L., et al.
Veröffentlicht: (2025)

ENERGY-EFFICIENT DOUBLE CAGE INDUCTION MOTOR DESIGN AND SIMULATION FOR RENEWABLE-POWERED ELECTRIC VEHICLES
von: Patel, Dhavalkumar Kantilal, et al.
Veröffentlicht: (2025)

Intelligent cascaded adaptive neuro fuzzy interface system controller fed KY converter for hybrid energy based microgrid applications
von: Sathish, Ch., et al.
Veröffentlicht: (2023)

Performance enhancement of direct torque control induction motor drive using space vector modulation strategy
von: Moussaoui, L.
Veröffentlicht: (2022)

Energy management based on a fuzzy controller of a photovoltaic/fuel cell/Li-ion battery/supercapacitor for unpredictable, fluctuating, high-dynamic three-phase AC load
von: Ayat, Y., et al.
Veröffentlicht: (2023)

Robust fault-tolerant sliding mode control and advanced fault diagnosis for doubly-fed induction generators
von: Hamdi, N., et al.
Veröffentlicht: (2025)

Electromechanical guidance system based on a fuzzy proportional-plus-differential position controller
von: Paranchuk, Ya. S., et al.
Veröffentlicht: (2021)

Research for an enhanced fault-tolerant solution against the current sensor fault types in induction motor drives
von: Tran, C. D., et al.
Veröffentlicht: (2024)

Intelligent power control strategy based on self-tuning fuzzy MPPT for grid-connected hybrid system
von: Chaib, H., et al.
Veröffentlicht: (2025)

Fundamentals of automatic frequency and power control system based on the controllable loads
von: Kulyk М.M., et al.
Veröffentlicht: (2010)

HARMONIC ANALYSIS OF THE COMBINED CIRCUIT OF SINGLE-PHASE SWITCHING OF INDUCTION ELECTRIC DRIVE WITH THYRISTOR CONTROL
von: Shurub, Yu. V., et al.
Veröffentlicht: (2020)

Increasing the damping properties of the magnetorheological actuator of the vehicle suspension control system
von: Dushchenko, V. V., et al.
Veröffentlicht: (2024)

Technology of Intelligent Control of Unmanned Aerial Vehicles Monitoring in the Airspace Using 5G Cellular Networks
von: Odarchenko, R.S., et al.
Veröffentlicht: (2020)

Nonlinear vector control of multiphase induction motor using linear quadratic regulator and active disturbances rejection control under disturbances and parameter variations
von: Rezgui, S. E., et al.
Veröffentlicht: (2025)

Mathematical modelling of transients in the electric drive of the turnout of the mono-sleeper type with switched-inductor motor
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2021)

Intelligent fuzzy back-stepping observer design based induction motor robust nonlinear sensorless control
von: Abed, K., et al.
Veröffentlicht: (2024)

Model reference adaptive backstepping control of double star induction machine with extended Kalman sensorless control
von: Chaabane, H., et al.
Veröffentlicht: (2022)

Analysis and testing of internal combustion engine driven linear alternator
von: Arslan, S., et al.
Veröffentlicht: (2023)

APPLICATION OF MAGNETORHEOLOGICAL ELASTOMERS FOR PERFORMANCE CONTROL OF CUSHIONING SYSTEMS FOR WHEELED VEHICLES
von: Dushchenko, V. V., et al.
Veröffentlicht: (2019)

Frequency analysis of stator currents of an induction motor controlled by direct torque control associated with a fuzzy flux estimator
von: Mabrouk, Y. A., et al.
Veröffentlicht: (2023)

BIOFUEL CELLS. CURRENT STATE AND PERSPECTIVES OF DEVELOPMENT IN UKRAINE
von: Kuzminskiy, Y., et al.
Veröffentlicht: (2018)

Artificial neural network and discrete wavelet transform for inter-turn short circuit and broken rotor bars faults diagnosis under various operating conditions
von: Rouaibia, R., et al.
Veröffentlicht: (2024)

A robust hybrid control strategy for enhancing torque stability and performance in PMSM drives
von: Nhi, V. T. K., et al.
Veröffentlicht: (2025)

USE OF WIND TURBINE FOR PRODUCE HYDROGEN IN THE COMPOSITION OF AUTONOMOUS FILLING STATIONS OF ELECTRIC VEHICLES ON FUEL CELLS
von: Budko, V., et al.
Veröffentlicht: (2019)

Research of the application of GPGPU and TPU technologies for ensuring comment quality in version control systems
von: Semonov, B.O., et al.
Veröffentlicht: (2025)

A precision system for thermostabilization with increased power
von: Kosyak, I. V.
Veröffentlicht: (2018)

Improved speed sensorless control for induction motor drives using rotor flux angle estimation
von: Tran, C. D., et al.
Veröffentlicht: (2025)

Optimization of fractional PI controller parameters for enhanced induction motor speed control via indirect field-oriented control
von: Alnaib, I. I., et al.
Veröffentlicht: (2025)

Software means of modeling of the vector type of reactive engine control system
von: Doroshenko, А.Yu., et al.
Veröffentlicht: (2018)

IMITATION MODEL OF A HIGH-SPEED INDUCTION MOTOR WITH FREQUENCY CONTROL
von: Pliugin, V. E., et al.
Veröffentlicht: (2017)