Buchumschlag

PROSPECTS FOR THE USE OF LIMITED-ANGLE TORQUE MOTORS IN RENEWABLE ENERGY SYSTEMS

Two original designs of permanent-magnet limited-angle torque motors (LATMs) are presented. Development trends for 2014–2024 are summarized, including new topologies, numerical-simulation methods, and application areas. The study highlights LATM capabilities in solar, wind, and bio-energy systems th...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2025
Hauptverfasser:	Chumak , V., Reutskyi , M., Haidenko , Yu., Ihnatiuk , Ye., Stulishenko , A.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Institute of Renewable Energy National Academy of Sciences of Ukraine 2025
Schlagworte:	torque motor limited-angle rotor renewable energy magnetoelectric drive LATM electromechanical actuator.
Online Zugang:	https://ve.org.ua/index.php/journal/article/view/545
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Vidnovluvana energetika

Institution

Vidnovluvana energetika

Ähnliche Einträge

Optimization of cogging torque in interior permanent magnet synchronous motor using optimum magnet v-angle
von: Patel, A. N., et al.
Veröffentlicht: (2023)

Performance enhancement of direct torque control induction motor drive using space vector modulation strategy
von: Moussaoui, L.
Veröffentlicht: (2022)

Influence of limiting the duration of the armature winding current on the operating indicators of a linear pulse electromechanical induction type converter
von: Bolyukh, V.F., et al.
Veröffentlicht: (2021)

DOUBLE STATOR AXIAL FLUX MAGNETOELECTRIC GENERATOR FOR CONVERSION OF LOW POTENTIAL MECHANICAL ENERGY
von: Kovalenko , M., et al.
Veröffentlicht: (2024)

The method of limitation of dynamic loads of nonlinear electromechanical systems under state vector robust control
von: Kuznetsov, B. I., et al.
Veröffentlicht: (2022)

RESEARCH OF THE MAGNETOELECTRIC LINEAR OSCILLATORY MOTOR CHARACTERISTICS DURING OPERATION ON ELASTOVISCOUS LOADING
von: Bondar, R. P.
Veröffentlicht: (2019)

Reduction of cogging torque of radial flux permanent magnet brushless DC motor by magnet shifting technique
von: Panchal, T. H., et al.
Veröffentlicht: (2022)

Mathematical modelling of transients in the electric drive of the turnout of the mono-sleeper type with switched-inductor motor
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2021)

Improve of the direct torque control strategy applied to a multi-phase interior permanent magnet synchronous motor using a super twisting sliding mode algorithm
von: Mehedi, F., et al.
Veröffentlicht: (2025)

Implementation of a new flux rotor based on model reference adaptive system for sensorless direct torque control modified for induction motor
von: Saifi, R.
Veröffentlicht: (2023)

The influence of the design of the stator winding of a synchronous-reactive generator on increasing its energy efficiency
von: Iegorov, O. B., et al.
Veröffentlicht: (2025)

Direct torque control based on second order sliding mode controller for three-level inverter-fed permanent magnet synchronous motor: comparative study
von: Guezi, A., et al.
Veröffentlicht: (2022)

Frequency analysis of stator currents of an induction motor controlled by direct torque control associated with a fuzzy flux estimator
von: Mabrouk, Y. A., et al.
Veröffentlicht: (2023)

Improved speed sensorless control for induction motor drives using rotor flux angle estimation
von: Tran, C. D., et al.
Veröffentlicht: (2025)

Slot opening displacement technique for cogging torque reduction of axial flux brushless DC motor for electric two-wheeler application
von: Patel, A. N.
Veröffentlicht: (2023)

PECULIARITIES OF APPLICATION OF THE NORMATIVE DOCUMENTS ON LIMITATION OF POLLUTANT EMISSIONS AT BIOMASS COMBUSTION
von: Zhovmir, M., et al.
Veröffentlicht: (2019)

Construction of Sensemaking Systems on the Basis of a Paradigm of Limiting Generalizations
von: Prokopchuk, I. A.
Veröffentlicht: (2014)

CHARACTERISTICS OF A 4-PHASE VALVE RELUCTANCE MOTOR WHEN POWERED BY UNCAPACITOR SWITCHBOARD
von: Finkelshtein, V. B., et al.
Veröffentlicht: (2016)

Development and study of a microprocessor automatic control system for a mono-switch tie type with a linear inductive electric motor and a discrete speed controller
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2022)

Determination of optimum tilt angle for PV panels considering solar radiation anisotropy
von: Ushkalenko, O.
Veröffentlicht: (2016)

Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
von: Веремеенко, И. С., et al.
Veröffentlicht: (2014)

Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
von: Веремеенко, И. С., et al.
Veröffentlicht: (2014)

ON THE ACHIEVABLE UPPER LIMIT OF THE ELEVATION ANGLES OF EFFECTIVE DIRECTION FINDING OF TARGETS OVER THE SEA BY THE ROOT-MUSIC METHOD PROVIDED WITH ADEQUATE A PRIORI PARAMETERS
von: Logvinov, Yu. F., et al.
Veröffentlicht: (2024)

Improvement of technical processes for producing cast rotor parts to increase performance characteristics of traction elecric drive
von: Акімов, Олег Вікторович
Veröffentlicht: (2014)

Improvement of technical processes for producing cast rotor parts to increase performance characteristics of traction elecric drive
von: Акімов, Олег Вікторович
Veröffentlicht: (2014)

Modeling and research of a magnetoelectric converter for hydro and pneumo actuators
von: Rymsha, V. V., et al.
Veröffentlicht: (2023)

ENERGY-EFFICIENT DOUBLE CAGE INDUCTION MOTOR DESIGN AND SIMULATION FOR RENEWABLE-POWERED ELECTRIC VEHICLES
von: Patel, Dhavalkumar Kantilal, et al.
Veröffentlicht: (2025)

Discrete limit theorems for Estermann zeta-functions. I
von: Laurincikas, Antanas, et al.
Veröffentlicht: (2018)

Continuous limits of tilting modules
von: Braga, Clezio Aparecido
Veröffentlicht: (2020)

Field programmable gate array hardware in the loop validation of fuzzy direct torque control for induction machine drive
von: Aib, A., et al.
Veröffentlicht: (2023)

FUZZY DYNAMIC RESPONSE OF A BISTABLE ELECTROMAGNETIC ACTUATOR BASED ON HIGH-COERCITIVITY PERMANENT MAGNETS
von: Baida, E. I.
Veröffentlicht: (2012)

ANALYSIS OF THE OPERATION PECULIARITIES OF THE SUPERCONDUCTING INDUCTIVE CURRENT LIMITER WITH ADDITIONAL SUPERCONDUCTING SCREEN
von: Dan'ko, V. G., et al.
Veröffentlicht: (2017)

Fault tolerant control of a permanent magnet synchronous machine using multiple constraints Takagi-Sugeno approach
von: Moussaoui, L., et al.
Veröffentlicht: (2022)

MATHEMATICAL MODELLING OF TRANSIENTS IN THE ELECTRIC DRIVE OF THE SWITCH – THE MAIN EXECUTIVE ELEMENT OF RAILWAY AUTOMATION
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2020)

STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS
von: Golik, O. V.
Veröffentlicht: (2016)

Impact of transmission line lightning performance on an operational substation reliability considering the lightning stroke incidence angle
von: Hamel, T., et al.
Veröffentlicht: (2025)

RESEARCH OF THE APPLICATIONS POSSIBILITY OF INTERFACE RELAY IN HYBRID SWITCHING SYSTEMS OF BISTABLE ACTUATORS WINDINGS
von: Klymenko, B. V., et al.
Veröffentlicht: (2016)

Simulation of asynchronous modes of synchronous motors with capacitors in the excitation circuit
von: Malyar, V. S., et al.
Veröffentlicht: (2012)

ROOT-MUSIC MEASUREMENTS OF TARGET ELEVATION ANGLES WITH ACCOUNT OF RADIO WAVE’S PHASE FRONT SPHERICITY
von: Pedenko, Yu. O.
Veröffentlicht: (2023)

INFLUENCE OF BISTABLE POLARIZED ACTUATOR CORE MAGNETIC PERMEABILITY AND RESISTIVITY ON BREAKAWAY TIME
von: Baida, E. I.
Veröffentlicht: (2013)