Cover Image

PROSPECTS FOR THE USE OF LIMITED-ANGLE TORQUE MOTORS IN RENEWABLE ENERGY SYSTEMS

Two original designs of permanent-magnet limited-angle torque motors (LATMs) are presented. Development trends for 2014–2024 are summarized, including new topologies, numerical-simulation methods, and application areas. The study highlights LATM capabilities in solar, wind, and bio-energy systems th...

Full description

Saved in:

Bibliographic Details
Date:	2025
Main Authors:	Chumak , V., Reutskyi , M., Haidenko , Yu., Ihnatiuk , Ye., Stulishenko , A.
Format:	Article
Language:	English
Published:	Institute of Renewable Energy National Academy of Sciences of Ukraine 2025
Subjects:	torque motor limited-angle rotor renewable energy magnetoelectric drive LATM electromechanical actuator.
Online Access:	https://ve.org.ua/index.php/journal/article/view/545
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Vidnovluvana energetika

Institution

Vidnovluvana energetika

Similar Items

Optimization of cogging torque in interior permanent magnet synchronous motor using optimum magnet v-angle
by: Patel, A. N., et al.
Published: (2023)

Performance enhancement of direct torque control induction motor drive using space vector modulation strategy
by: Moussaoui, L.
Published: (2022)

Mitigation of cogging torque in surface permanent magnet brushless DC motor using slot opening shift
by: Patel, A. N., et al.
Published: (2026)

Reduction of cogging torque of radial flux permanent magnet brushless DC motor by magnet shifting technique
by: Panchal, T. H., et al.
Published: (2022)

Implementation of a new flux rotor based on model reference adaptive system for sensorless direct torque control modified for induction motor
by: Saifi, R.
Published: (2023)

RESEARCH OF THE MAGNETOELECTRIC LINEAR OSCILLATORY MOTOR CHARACTERISTICS DURING OPERATION ON ELASTOVISCOUS LOADING
by: Bondar, R. P.
Published: (2019)

CHARACTERISTICS OF A 4-PHASE VALVE RELUCTANCE MOTOR WHEN POWERED BY UNCAPACITOR SWITCHBOARD
by: Finkelshtein, V. B., et al.
Published: (2016)

Direct torque control based on second order sliding mode controller for three-level inverter-fed permanent magnet synchronous motor: comparative study
by: Guezi, A., et al.
Published: (2022)

Improve of the direct torque control strategy applied to a multi-phase interior permanent magnet synchronous motor using a super twisting sliding mode algorithm
by: Mehedi, F., et al.
Published: (2025)

DOUBLE STATOR AXIAL FLUX MAGNETOELECTRIC GENERATOR FOR CONVERSION OF LOW POTENTIAL MECHANICAL ENERGY
by: Kovalenko , M., et al.
Published: (2024)

Improved speed sensorless control for induction motor drives using rotor flux angle estimation
by: Tran, C. D., et al.
Published: (2025)

Slot opening displacement technique for cogging torque reduction of axial flux brushless DC motor for electric two-wheeler application
by: Patel, A. N.
Published: (2023)

Frequency analysis of stator currents of an induction motor controlled by direct torque control associated with a fuzzy flux estimator
by: Mabrouk, Y. A., et al.
Published: (2023)

ENERGY-EFFICIENT DOUBLE CAGE INDUCTION MOTOR DESIGN AND SIMULATION FOR RENEWABLE-POWERED ELECTRIC VEHICLES
by: Patel, Dhavalkumar Kantilal, et al.
Published: (2025)

Development and study of a microprocessor automatic control system for a mono-switch tie type with a linear inductive electric motor and a discrete speed controller
by: Buriakovskyi, S. G., et al.
Published: (2022)

POWER CHARACTERISTICS OF A VIBRATOR WITH A LINEAR NONSALIENT-POLE ARMATURE MOTOR DRIVE
by: Bondar, R. P.
Published: (2014)

Mathematical modelling of transients in the electric drive of the turnout of the mono-sleeper type with switched-inductor motor
by: Buriakovskyi, S. G., et al.
Published: (2021)

Simulation of asynchronous modes of synchronous motors with capacitors in the excitation circuit
by: Malyar, V. S., et al.
Published: (2012)

A mathematical model of an induction motor with the stator and rotor unsymmetry
by: Chaban, V. Y., et al.
Published: (2012)

Mathematical modeling of electromechanical processes in a brushless DC motor
by: Tkachuk, V. I., et al.
Published: (2014)

THE THYRISTOR CONVERTER INFLUENCE ON THE PULSATIONS OF THE ELECTROMAGNETIC TORQUE OF THE INDUCTION MOTOR AT PARAMETRICAL CONTROL
by: Lobov, V. I., et al.
Published: (2017)

DEVELOPMENT TRENDS FOR ROLLING STOCK TRACTION MOTORS
by: Ustenko, A. V., et al.
Published: (2013)

The influence of the design of the stator winding of a synchronous-reactive generator on increasing its energy efficiency
by: Iegorov, O. B., et al.
Published: (2025)

THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
by: Zagirnyak, M. V., et al.
Published: (2014)

RESEARCH OF DYNAMIC PARAMETERS OF THE ELECTRIC DRIVE ON THE BASIS OF ROLLING ROTOR MOTOR
by: Kulinchenko, G. V., et al.
Published: (2016)

Wavelet packet analysis for rotor bar breakage in an inverter induction motor
by: Abu Ibaid, O. Z. I., et al.
Published: (2023)

Influence of limiting the duration of the armature winding current on the operating indicators of a linear pulse electromechanical induction type converter
by: Bolyukh, V.F., et al.
Published: (2021)

Estimation of the main dimensions of the traction permanent magnet-assisted synchronous reluctance motor
by: Liubarskyi, B. G., et al.
Published: (2021)

MATHEMATICAL FIELD MODELS OF BRUSHLESS DC MOTORS WITH PERMANENT MAGNETS AND THEIR COMPARATIVE ANALYSIS
by: Matyuschenko, A. V.
Published: (2015)

Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
by: Malyar, V. S., et al.
Published: (2022)

Additional power loss in a frequency-controlled induction motor due to voltage higher harmonics
by: Petrenko, A. N., et al.
Published: (2012)

Research for an enhanced fault-tolerant solution against the current sensor fault types in induction motor drives
by: Tran, C. D., et al.
Published: (2024)

Substantiation of Boundary Accelerations of Roller Forming Unit Optimal Reversal Mode According to Forth-Order Acceleration
by: Loveykin, V. S., et al.
Published: (2019)

Substantiation of Boundary Accelerations of Roller Forming Unit Optimal Reversal Mode According to Forth-Order Acceleration
by: Loveykin, V. S., et al.
Published: (2019)

STRUCTURAL-PARAMETRIC SYNTHESIS OF ROLLING MILLS MULTI-MOTOR ELECTRIC DRIVES
by: Kuznetsov, B. I., et al.
Published: (2020)

Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
by: Веремеенко, И. С., et al.
Published: (2014)

Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
by: Веремеенко, И. С., et al.
Published: (2014)

Forming the induction motor torque when starting
by: O. Khrebtova
Published: (2020)

Torque of a permanent magnet slotless torque motor with solid stator back iron
by: Ye. V. Isayev, et al.
Published: (2024)

A MULTIPURPOSE SWITCHED RELUCTANCE MOTOR WITH A SERIES COMMUTATION BUFFER
by: Vasil'ev, L. A., et al.
Published: (2014)