Cover Image

REFINED MODELLING OF INDUCTION MACHINES OF RENEWABLE ENERGY SYSTEMS WITH CHANGES IN THE DEGREE OF LOAD

Обґрунтовано значущість впливу режимів з малим завантаженням асинхронних машин систем відновлюваної енергетики на якість проєктних рішень. З урахуванням додаткових чинників розроблено уточнені математичні моделі асинхронних машин за малих завантажень та виконано дослідження їх ефективності у порівня...

Full description

Saved in:

Bibliographic Details
Date:	2025
Main Authors:	Popovych , O., Golovan , I.
Format:	Article
Language:	Ukrainian
Published:	Institute of Renewable Energy National Academy of Sciences of Ukraine 2025
Subjects:	lightly loaded induction machines mathematical modeling losses in steel parameters of the substitute circuit.
Online Access:	https://ve.org.ua/index.php/journal/article/view/564
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Vidnovluvana energetika

Institution

Vidnovluvana energetika

Similar Items

ANALYSIS OF THE SPECIAL FEATURES OF THE THERMAL PROCESS IN AN INDUCTION GENERATOR AT HIGH SATURATION OF THE MAGNETIC SYSTEM
by: Chenchevoi, V., et al.
Published: (2017)

Refined calculation of energy modes of a frequency-regulated induction motor
by: Volkov, V. A., et al.
Published: (2024)

DIELECTRIC SPECTROSCOPY OF CASING THERMOSETTING COMPOSITE ELECTRICAL INSULATION SYSTEM OF INDUCTION TRACTION ELECTRIC MACHINES
by: Bezprozvannych, G. V., et al.
Published: (2018)

PERFORMANCE ANALYSIS OF SIX-PHASE INDUCTION MACHINE-MULTILEVEL INVERTER WITH ARBITRARY DISPLACEMENT
by: Ben Slimene, Marwa
Published: (2020)

Fault-tolerant control of a double star induction machine operating in active redundancy
by: Guizani, S., et al.
Published: (2025)

A COMPUTERIZED DIAGNOSTIC COMPLEX FOR RELIABILITY TESTING OF ELECTRIC MACHINES
by: Somka, O. O., et al.
Published: (2015)

Development of methods for adapting the parameters of spatial end winding sections in 2D circuit-field models of induction-synchronous electric machines
by: Kotsur, M. I.
Published: (2024)

System-structural cycles analysis of refrigerating machines and heat pump installations
by: Харлампиди, Д. Х.
Published: (2015)

System-structural cycles analysis of refrigerating machines and heat pump installations
by: Харлампиди, Д. Х.
Published: (2015)

Allowance for heat and vibration parameters variation of electric machines with extended failure interval
by: Somka, O. O., et al.
Published: (2014)

Investigation of a three-phase-single-phase induction electric drive under stochastic loads
by: Shurub, Yu. V.
Published: (2014)

Theory and practice of numerical-field analysis and refinement of electromagnetic and energy parameters in the designs of three-phase induction motors
by: Milykh, V. I.
Published: (2026)

Control of an autonomous wind energy conversion system based on doubly fed induction generator supplying a non-linear load
by: L’Hadj Said, M., et al.
Published: (2025)

Effective parameters of dielectric absorption of polymeric insulation with semiconductor coatings of power high voltage cables
by: Bezprozvannych, G. V., et al.
Published: (2022)

UNBALANCED LOAD FLOW WITH HYBRID WAVELET TRANSFORM AND SUPPORT VECTOR MACHINE BASED ERROR-CORRECTING OUTPUT CODES FOR POWER QUALITY DISTURBANCES CLASSIFICATION INCLUDING WIND ENERGY
by: Rahmani, Ala eddine, et al.
Published: (2019)

Analytical method of determining conditions for full compensation of reactive power in the power supply system
by: Yagup, V. G., et al.
Published: (2024)

MODELLING OF DYNAMIC MODES OF AN INDUCTION ELECTRIC DRIVE AT PERIODIC LOAD
by: Malyar, V. S., et al.
Published: (2020)

A novel load shedding methodology to mitigate voltage instability in power system
by: Chappa, H., et al.
Published: (2022)

RESEARCH INTO VALVE-ENGINE TRANSDUCERS OF BRUSHLESS SYNCHRONOUS AND ASYNCHRONIZED MACHINES IN A CIRCUIT SIMULATION SYSTEM.
by: Galinovskiy, A. M.
Published: (2013)

SIMULATION OF OPTOELECTRONIC LOAD POWERED BY PHOTOCELL AND BATTERY
by: Bondarenko, D.
Published: (2020)

A DETERMINATION OF THE FLUX DENSITY IN CORE OF DISTRIBUTION TRANSFORMERS, WHAT BUILT WITH THE COMMON USING OF GRAIN AND NON GRAIN ORIENTED MAGNETIC STEELS
by: Pentegov, I. V., et al.
Published: (2015)

ANALYSIS OF THE IMPACT OF DISTRIBUTED GENERATION OF RENEWABLE ENERGY SOURCES ON THE RESERVE OF UNDER FREQUENCY LOAD SHEDDING
by: Lytvynchuk, V., et al.
Published: (2022)

Application of a wavelet neural network approach to detect stator winding short circuits in asynchronous machines
by: Sakhara, S., et al.
Published: (2023)

Impact of fractional filter in PI control loop applied to induction motor speed drive
by: Hassainia, S., et al.
Published: (2022)

HIGH CURRENT HARMONICS INFLUENCE ON THE CHOICE OF CONDUCTORS OF CRANE POWER SUPPLY SYSTEMS
by: Andrienko, P. D., et al.
Published: (2019)

Effect of short-circuit in stator windings on the operation of doubly-fed induction generators operating in a wind power system
by: Diboune, Y., et al.
Published: (2025)

Steady-state analysis of a hybrid power supply system using an induction generator with a shunt AC/DC converter
by: Mazurenko, L. I., et al.
Published: (2024)

COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
by: Prakht, V. A., et al.
Published: (2020)

INCREASE OF ENERGY EFFICIENCY OF TESTING OF TRACTION ELECTRIC MACHINES OF DIRECT AND PULSATING CURRENT
by: Afanasov, A. M.
Published: (2015)

THE THYRISTOR CONVERTER INFLUENCE ON THE PULSATIONS OF THE ELECTROMAGNETIC TORQUE OF THE INDUCTION MOTOR AT PARAMETRICAL CONTROL
by: Lobov, V. I., et al.
Published: (2017)

IDENTIFICATION OF GENERALIZED LINEAR LOAD IN THREE-PHASE THREE-WIRE NETWORK IN THE PROBLEM OF THE DISTRIBUTION OF ACTUAL CONTRIBUTIONS AT THE POINT OF COMMON COUPLING
by: Sayenko, Yu. L., et al.
Published: (2016)

STUDY OF FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR UNITS TEMPERATURE VERSUS LOAD AND POWER SUPPLY TYPE
by: Vakaruk, T. V., et al.
Published: (2014)

IMPLEMENTING OF MICROSOFT AZURE MACHINE LEARNING TECHNOLOGY FOR ELECTRIC MACHINES OPTIMIZATION
by: Pliugin, V. E., et al.
Published: (2019)

A TECHNIQUE OF MEASURING OF RESISTANCE OF A GROUNDING DEVICE
by: Nizhevskyi, I. V., et al.
Published: (2016)

ІНКРЕМЕНТНИЙ ЦИФРОВИЙ КВАЗІІДЕАЛ ІНТЕГРАТОР ЗАЯВКИ ПОПЕРЕДНЬОГО ПОТОКУ ОЦІНКИ КЕРУЮЧОЇ ІНДУКЦІЙНОЇ МАШИНИ
by: Ustun, O., et al.
Published: (2008)

DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
by: Vaskovskyi, Yu. M., et al.
Published: (2013)

Optimization of loading modes of a controlled asynchronous electric drive
by: Kanov, L. N.
Published: (2013)

CALCULATION AND DESIGN OF A ROBUST SPEED CONTROLLER OF A FREQUENCY-CONTROLLED INDUCTION ELECTRIC DRIVE
by: Khlopenko, N. J.
Published: (2020)

STATISTICAL OPTIMIZATION OF FREQUENCY REGULATED INDUCTION ELECTRIC DRIVES WITH SCALAR CONTROL
by: Shurub, Yu. V.
Published: (2017)

AN INDUCTION SENSOR FOR MEASURING CURRENTS OF NANOSECOND RANGE
by: Shalamov, S. P.
Published: (2016)