Buchumschlag

CALCULATION OF THE EQUIVALENT ELECTRICAL PARAMETERS OF THE INDUCTOR OF INDUCTION CHANNEL FURNACE WITH DEFECTS IN ITS LINING

Aim. The aim of the paper is to determine a quantitative relationship between measured impedance of the inductor and the electrical characteristics of the separated melt circuit parts for the determination of the place of a liquid metal leakage and for the improvement in such way the diagnostic syst...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	Podoltsev, A. D., Zolotaryov, V. M., Shcherba, M. A., Belyanin, R. V.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2018
Schlagworte:	equivalent electric parameters mathematical modeling induction channel furnace defects of lining diagnostics of the lining state 621.365.5
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2018.4.05
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

Calculation of the equivalent electrical parameters of the inductor of induction channel furnace with defects in its lining
von: Podoltsev, O.D., et al.
Veröffentlicht: (2018)

COMPARATIVE ANALYSIS OF ELECTRICAL AND THERMAL CONTROL OF THE LINING STATE OF INDUCTION APPARATUS OF COPPER WIRE MANUFACTURE
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2018)

Determination of individual values of four-element equivalent circuits elements parameters at technical diagnostics of insulation by absorption methods
von: Kyrylenko, V. M., et al.
Veröffentlicht: (2023)

Equivalent cable harness method generalized for predicting the electromagnetic emission of twisted-wire pairs
von: Bensiammar, S., et al.
Veröffentlicht: (2022)

Determination of the electric field strength of high-voltage substations
von: Koliushko, D. G., et al.
Veröffentlicht: (2023)

AN INDUCTION SENSOR FOR MEASURING CURRENTS OF NANOSECOND RANGE
von: Shalamov, S. P.
Veröffentlicht: (2016)

ELECTROMECHANICAL TRANSIENT PROCESSES DURING SUPPLY VOLTAGE CHANGING IN THE SYSTEM OF POLYMER INSULATION COVERING OF THE CURRENT-CARRYING CORE OF ULTRA HIGH VOLTAGE CABLES
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2018)

Analysis of the thermal state of the electromagnetic mill inductor with oil cooling in stationary operation modes
von: Milykh, V. I., et al.
Veröffentlicht: (2023)

MODELING PARAMETERS OF ARC OF ELECTRIC ARC FURNACE
von: Khrestin, R. N.
Veröffentlicht: (2015)

RESEARCH OF ARC FURNACE ELECTRICAL MODE WITH A FUZZY CONTROL MODEL
von: Paranchuk, Y. S., et al.
Veröffentlicht: (2020)

Continuous Light-Guide Control of Melts Temperature in Induction Furnaces
von: Zhukov, Leonid, et al.
Veröffentlicht: (2024)

DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)

ANALYSIS OF ELECTROMAGNETIC PROCESSES IN THE SYSTEM «CYLINDRICAL SOLENOID – MASSIVE CONDUCTOR»
von: Batygin, Yu. V., et al.
Veröffentlicht: (2018)

ANALYSIS OF MUTUAL CAPACITANCE AND INDUCTANCE OF PRINTED CIRCUIT
von: Ivanov, V. G.
Veröffentlicht: (2014)

FUZZY-STATISTICAL MODELLING OF OVERHEAD LINES FOR ESTIMATING THE FAILURE PROBABILITY IN THE TASKS OF ANALYSING THE POWER SYSTEMS OPERATIONAL RISK
von: Bardyk , Ye., et al.
Veröffentlicht: (2025)

Numerical simulation of electromagnetic and thermal fields in induction channel furnaces with defects of lining
von: M. A. Shcherba
Veröffentlicht: (2018)

Analysis of electromagnetic processes in the induction channel furnace used in the cable industry
von: V. M. Zolotarev, et al.
Veröffentlicht: (2016)

Steady-state analysis of a hybrid power supply system using an induction generator with a shunt AC/DC converter
von: Mazurenko, L. I., et al.
Veröffentlicht: (2024)

OPTIMIZATION OF DESIGN PARAMETERS OF AUTOTRANSFORMERS IN ICE MELTING SCHEME WITH NON-INDUCTIVE CIRCUIT ON 6-10 KV OVERHEAD POWER LINES
von: Lazurenko, O. P., et al.
Veröffentlicht: (2019)

Modeling and Control of Long-Term Electromagnetic and Thermal Processes in Induction Channel Furnace for Copper Rod Production
von: A. A. Shcherba, et al.
Veröffentlicht: (2017)

Calculation of electrothermal processes in the induction channel furnace in the steady-state operation based on the theory of thermal circuits
von: A. A. Shcherba, et al.
Veröffentlicht: (2021)

Open circuit fault diagnosis for a five-level neutral point clamped inverter in a grid-connected photovoltaic system with hybrid energy storage system
von: Abdellah, A., et al.
Veröffentlicht: (2023)

Approximate method for calculating the magnetic field of 330-750 kV high-voltage power line in maintenance area under voltage
von: Rozov, V. Yu., et al.
Veröffentlicht: (2022)

Electromagnetic, thermal and hydrodynamic processes at induction heating of output channel of glass melting furnace
von: I. V. Volkov, et al.
Veröffentlicht: (2018)

APPROXIMATION OF UNIVERSAL CHARACTERISTICS OF HYDROTURBINES BY ENGINEERING GEOMETRY METHODS
von: Vasko, P.
Veröffentlicht: (2021)

Intensification of heat and mass transfer in induction channel furnaces
von: O. I. Bondar, et al.
Veröffentlicht: (2022)

Numerical modelling of induction channel furnace thermal state
von: O. I. Bondar, et al.
Veröffentlicht: (2021)

Electromagnetic parameters of two-phase induction channel furnace
von: O. I. Bondar, et al.
Veröffentlicht: (2020)

PYROLYSIS FURNACE OF CONTINUOUS COMBUSTION
von: Klyus , V., et al.
Veröffentlicht: (2024)

Coupled electromagnetic and thermal processes in thermal insulation of induction channel furnaces during changes of its defects configuration
von: M. A. Shcherba
Veröffentlicht: (2018)

Refined calculation of energy modes of a frequency-regulated induction motor
von: Volkov, V. A., et al.
Veröffentlicht: (2024)

REFINED MODELLING OF INDUCTION MACHINES OF RENEWABLE ENERGY SYSTEMS WITH CHANGES IN THE DEGREE OF LOAD
von: Popovych , O., et al.
Veröffentlicht: (2025)

Expression profiling of plac1 in murine cancer cell lines
von: Mahmoudian, J., et al.
Veröffentlicht: (2023)

study of high-frequency induction heating and melting of conducting workpieces taking into account the non-uniform current density in inductor windings
von: A. A. Shcherba, et al.
Veröffentlicht: (2015)

SYNTHESIS AND ANALYSIS OF ARC FURNACE ELECTRICAL MODE CONTROL SYSTEM ON THE BASIS OF THREE-DIMENSIONAL PHASE CURRENTS VECTOR DISTRIBUTION
von: Lozynskyi, O. Y., et al.
Veröffentlicht: (2019)

Problems of active protection of information from leakage through vibroacoustic channels
von: Kataiev, V. С., et al.
Veröffentlicht: (2016)

DEVELOPMENT OF METHODS AND MEANS OF COMPUTER SIMULATION FOR STUDYING ARC FURNACE ELECTRIC MODES
von: Lozynskyi, O. Y., et al.
Veröffentlicht: (2018)

AN INDUCTION INDUCTOR SYSTEM WITH A CIRCULAR TURN WITH A CUT BETWEEN TWO THIN-WALLED SHEET METALS
von: Gnatov, A. V.
Veröffentlicht: (2013)

Variations of induction vector in North America
von: Babak, V., et al.
Veröffentlicht: (2014)

Enhancement of the energy efficiency of electric steelmaking processes by means of natural gas conversion with the exhaust gases of an arc furnace
von: Gubinskii M.V., et al.
Veröffentlicht: (2017)