Buchumschlag

Expansion of cylindrical tubular workpieces on high-voltage magnetic-pulse installation with controlled vacuum discharger

Purpose. An experimental verification of the existence of a range of values for the parameters of the capacitive energy storage of the magnetic-pulse installations with controlled vacuum discharger, in which, with a high probability, there is a «cut» of the discharge current pulses and the expansion...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2021
Hauptverfasser:	Ljutenko, L. A., Mikhailov, V. M.
Format:	Artikel
Sprache:	Englisch Ukrainisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2021
Schlagworte:	high-voltage magnetic-pulse installations capacitive energy storage controlled vacuum discharger current pulse «cut» probability of «cut» external coil expansion of cylindrical tubular workpiece part of complicated shape
Online Zugang:	http://eie.khpi.edu.ua/article/view/234463
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

Optical Properties of Galvanic Series of Matrices for Microrelief Light Reflective Structures
von: Antonov, E. E., et al.
Veröffentlicht: (2013)

Methodology for forest loss assessment using GIS technologies
von: Horelyk, Stanislav, et al.
Veröffentlicht: (2023)

Analytical relations for fields and currents in magnetic-pulsed «expansion» of tubular conductors of small diameter
von: Batygin, Yu. V., et al.
Veröffentlicht: (2024)

A THIN CIRCULAR TURN WITH A CUT ABOVE A THIN-WALLED SHEET METAL
von: Gnatov, A. V.
Veröffentlicht: (2012)

RESEARCH INTO ELECTROMAGNETIC PROCESSES IN A COMBINED CYLINDRICAL-TYPE MATCHING DEVICE WITH A MASSIVE SINGLE-TURN INDUCTOR
von: Trunova, I. S.
Veröffentlicht: (2013)

EXPERIMENTAL APPROBATION OF AN ELECTRODYNAMIC DIRECT ELECTRIC SYSTEM FOR EXTERNAL AUTOMOBILE BODY REPAIR
von: Bondarenko, A. Yu., et al.
Veröffentlicht: (2014)

INVESTIGATION OF MECHANICAL STRESSES IN THE DRIVE SHAFT OF MV VACUUM CIRCUIT BREAKER
von: Baida, E. I., et al.
Veröffentlicht: (2017)

MAGNETIC PULSED PROCESSING OF METALS FOR ADVANCED TECHNOLOGIES OF MODERNITY – A BRIEF REVIEW
von: Batygin, Yu. V., et al.
Veröffentlicht: (2016)

Method for the Optimal Design of Vacuum-Evaporative Heat Pumps
von: Kuznetsov, Mikhail A., et al.
Veröffentlicht: (2019)

Method for the Optimal Design of Vacuum-Evaporative Heat Pumps
von: Kuznetsov, Mikhail A., et al.
Veröffentlicht: (2019)

SIMULATION OF PARALLEL WORK OF ASYNCHRONOUS GENERATORS IN AUTONOMOUS INSTALLATION FOR CHARGING BATTERIES
von: Holovko, V., et al.
Veröffentlicht: (2018)

EXPERIMENTAL INVESTIGATION OF THE CURRENT DISTRIBUTION ON THE SHEET BLANK SURFACE IN LINEAR TOOLS OF MAGNETIC-PULSED ATTRACTION
von: Batygin, Yu. V., et al.
Veröffentlicht: (2020)

INVESTIGATIONS OF THE DYNAMICS OF A BISTABLE ELECTROMAGNET WITH IMPROVED CHARACTERISTICS FOR MEDIUM VOLTAGE VACUUM CIRCUIT BREAKERS
von: Baida, E. I., et al.
Veröffentlicht: (2020)

Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
von: Вакуленко, А. Н., et al.
Veröffentlicht: (2015)

Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
von: Вакуленко, А. Н., et al.
Veröffentlicht: (2015)

Efficiency of multi-armature linear pulse electromechanical power and speed converters
von: Bolyukh, V. F., et al.
Veröffentlicht: (2024)

APPROXIMATE CALCULATION OF ACTIVE RESISTANCE AND TEMPERATURE OF THE PULSE ELECTRIC ARC CHANNEL IN A HIGH-CURRENT DISCHARGE CIRCUIT OF A POWERFUL HIGH-VOLTAGE CAPACITOR ENERGY STORAGE
von: Baranov, M. I., et al.
Veröffentlicht: (2017)

Determination of economically justified parameters of synchronous disconnection at low-voltage circuit switching via a synchronous vacuum contactor
von: Verkhola, A. V.
Veröffentlicht: (2014)

WORKING FEATURES OF POWER SOURCE SYSTEMS – A MULTIPLE CURRENT PULSE GENERATOR
von: Argun, Schasyana V.
Veröffentlicht: (2013)

PERFORMANCE ANALYSIS OF USING TAPERED WINDOWS FOR SIDELOBE REDUCTION IN CHIRP-PULSE COMPRESSION
von: Galushko, V. G.
Veröffentlicht: (2019)

The possible degassing nature of some local structures of concentric and zonal structure on the territory of the Volyn-Podolye plate and the Western part of the Ukrainian Shield and the way of their subsequent study
von: Entin, V.A., et al.
Veröffentlicht: (2020)

FORMING CAPABILITIES OF A PULSE MAGNETIC FIELD GENERATOR
von: Petkov, A. A.
Veröffentlicht: (2015)

THE SEVENTY YEARS’ HISTORY OF "YUZHCABLE" WORKS
von: Zolotaryov, V. M.
Veröffentlicht: (2013)

ON THE APPLICABILITY OF THE PHASE SCANNING METHOD IN ANTENNA ARRAYS OF CHIRP PULSE RADARS
von: Galushko, V. G., et al.
Veröffentlicht: (2019)

MATHEMATICAL MODEL OF THE EMC DISCHARGE PROCESS SOLUTION IN ALONE STATE WIND TURBINE WITH ELECTRODYNAMIC PUMP DRIVER
von: Holovko, V., et al.
Veröffentlicht: (2019)

INFLUENCE OF ARMATURE PARAMETERS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER ON ITS EFFICIENCY
von: Bolyukh, V. F., et al.
Veröffentlicht: (2017)

SYNTHESIS GAS REGENERATION ELECTROTECHNOLOGY USING VOLUME HIGH-VOLTAGE PULSED DISCHARGES: CORONA AND BARRIER ONES
von: Boyko, N. I., et al.
Veröffentlicht: (2014)

PIEZOELECTRIC WAVEGUIDE SENSOR FOR MEASURING PULSE PRESSURE IN CLOSED LIQUID VOLUMES AT HIGH VOLTAGE ELECTRIC DISCHARGE
von: Zhekul, V. G., et al.
Veröffentlicht: (2017)

INFLUENCE OF CORONARY DISCHARGE PARAMETERS ON THE EFFICIENCY OF LIGHTNING PROTECTION SYSTEM ELEMENTS
von: Chernukhin, A. Yu.
Veröffentlicht: (2017)

THE MICRO- AND NANOSECOND DISCHARGES IN GAS BUBBLES FOR WATER DISINFECTION AND PURIFICATION
von: Boyko, N. I., et al.
Veröffentlicht: (2019)

INFLUENCE OF GEOMETRICAL PARAMETERS OF THE INDUCTOR AND ARMATURE ON THE INDICATORS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER OF AN ELECTRODYNAMIC TYPE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2019)

THE PROBLEM OF CORRECT CHOICE OF FERRITE BEADS
von: Gurevich, Vladimir I.
Veröffentlicht: (2016)

Calculation and experimental determination of the speed of advancement of the plasma leader channel of a pulse spark discharge in atmospheric air
von: Baranov, M. I.
Veröffentlicht: (2024)

A NEW TREND IN MAGNETIC-PULSE METAL WORKING ASSOCIATED WITH THIN-WALLED SHEET METAL ATTRACTION. HISTORY AND DEVELOPMENT PROSPECTS
von: Gnatov, A. V.
Veröffentlicht: (2013)

AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 42: ELECTRONICS: RETROSPECTIVE VIEW, SUCCESSES AND PROSPECTS OF ITS DEVELOPMENT
von: Baranov, M. I.
Veröffentlicht: (2018)

THE EFFECT OF THE ACTIVE RESISTANCE OF THE PULSE TRANSFORMER WINDINGS ON THE PARAMETERS OF VOLTAGE PULSES GENERATED ON A CAPACITIVE LOAD
von: Gurin, A. G., et al.
Veröffentlicht: (2019)

IDENTIFICATION OF TECHNOLOGICAL DEFECTS IN HIGH-VOLTAGE SOLID INSULATION OF ELECTRICAL INSULATION STRUCTURES ON THE CHARACTERISTICS OF PARTIAL DISCHARGES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2019)

РОЗРОБКА ТЕХНОЛОГІЇ ЧИЩЕННЯ ВАКУУМНИХ ПОВЕРХОНЬ ПЛАЗМОЮ ВИСОКОЧАСТОТНОГО РОЗРЯДУ В КОМБІНАЦІЇ З РОЗРЯДОМ ПОСТІЙНОГО СТРУМУ
von: Kovtun, Yurii, et al.
Veröffentlicht: (2021)

EFFICIENCY OF APPLICATION OF SEMICONDUCTIVE COATINGS FOR REGULATION OF ELECTRIC FIELD IN HIGH-VOLTAGE INSULATION OF ELECTRIC MACHINES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2019)

CONTROLLABILITY OF NON-CONTACT MAGNETIC PULSE STRAIGHTENING
von: Gnatov, A. V.
Veröffentlicht: (2013)