Buchumschlag

Expansion of cylindrical tubular workpieces on high-voltage magnetic-pulse installation with controlled vacuum discharger

Purpose. An experimental verification of the existence of a range of values for the parameters of the capacitive energy storage of the magnetic-pulse installations with controlled vacuum discharger, in which, with a high probability, there is a «cut» of the discharge current pulses and the expansion...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2021
Hauptverfasser:	Ljutenko, L. A., Mikhailov, V. M.
Format:	Artikel
Sprache:	Englisch Ukrainisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2021
Schlagworte:	high-voltage magnetic-pulse installations capacitive energy storage controlled vacuum discharger current pulse «cut» probability of «cut» external coil expansion of cylindrical tubular workpiece part of complicated shape
Online Zugang:	http://eie.khpi.edu.ua/article/view/234463
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

Analytical relations for fields and currents in magnetic-pulsed «expansion» of tubular conductors of small diameter
von: Batygin, Yu. V., et al.
Veröffentlicht: (2024)

Optical Properties of Galvanic Series of Matrices for Microrelief Light Reflective Structures
von: Antonov, E. E., et al.
Veröffentlicht: (2013)

MATHEMATICAL MODEL OF THE EMC DISCHARGE PROCESS SOLUTION IN ALONE STATE WIND TURBINE WITH ELECTRODYNAMIC PUMP DRIVER
von: Holovko, V., et al.
Veröffentlicht: (2019)

Methodology for forest loss assessment using GIS technologies
von: Horelyk, Stanislav, et al.
Veröffentlicht: (2023)

WORKING FEATURES OF POWER SOURCE SYSTEMS – A MULTIPLE CURRENT PULSE GENERATOR
von: Argun, Schasyana V.
Veröffentlicht: (2013)

RESEARCH INTO ELECTROMAGNETIC PROCESSES IN A COMBINED CYLINDRICAL-TYPE MATCHING DEVICE WITH A MASSIVE SINGLE-TURN INDUCTOR
von: Trunova, I. S.
Veröffentlicht: (2013)

A THIN CIRCULAR TURN WITH A CUT ABOVE A THIN-WALLED SHEET METAL
von: Gnatov, A. V.
Veröffentlicht: (2012)

A NEW TREND IN MAGNETIC-PULSE METAL WORKING ASSOCIATED WITH THIN-WALLED SHEET METAL ATTRACTION. HISTORY AND DEVELOPMENT PROSPECTS
von: Gnatov, A. V.
Veröffentlicht: (2013)

THE EFFECT OF THE ACTIVE RESISTANCE OF THE PULSE TRANSFORMER WINDINGS ON THE PARAMETERS OF VOLTAGE PULSES GENERATED ON A CAPACITIVE LOAD
von: Gurin, A. G., et al.
Veröffentlicht: (2019)

CONTROLLABILITY OF NON-CONTACT MAGNETIC PULSE STRAIGHTENING
von: Gnatov, A. V.
Veröffentlicht: (2013)

EXPERIMENTAL APPROBATION OF AN ELECTRODYNAMIC DIRECT ELECTRIC SYSTEM FOR EXTERNAL AUTOMOBILE BODY REPAIR
von: Bondarenko, A. Yu., et al.
Veröffentlicht: (2014)

MAGNETIC PULSED PROCESSING OF METALS FOR ADVANCED TECHNOLOGIES OF MODERNITY – A BRIEF REVIEW
von: Batygin, Yu. V., et al.
Veröffentlicht: (2016)

POWERFUL GENERATORS OF HIGH-VOLTAGE PULSES WITH NANOSECOND FRONTS
von: Boyko, N. I.
Veröffentlicht: (2018)

EXPERIMENTAL INVESTIGATION OF THE CURRENT DISTRIBUTION ON THE SHEET BLANK SURFACE IN LINEAR TOOLS OF MAGNETIC-PULSED ATTRACTION
von: Batygin, Yu. V., et al.
Veröffentlicht: (2020)

SIMULATION OF PARALLEL WORK OF ASYNCHRONOUS GENERATORS IN AUTONOMOUS INSTALLATION FOR CHARGING BATTERIES
von: Holovko, V., et al.
Veröffentlicht: (2018)

Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
von: Вакуленко, А. Н., et al.
Veröffentlicht: (2015)

Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
von: Вакуленко, А. Н., et al.
Veröffentlicht: (2015)

PERFORMANCE ANALYSIS OF USING TAPERED WINDOWS FOR SIDELOBE REDUCTION IN CHIRP-PULSE COMPRESSION
von: Galushko, V. G.
Veröffentlicht: (2019)

Efficiency of multi-armature linear pulse electromechanical power and speed converters
von: Bolyukh, V. F., et al.
Veröffentlicht: (2024)

Analysis of energy characteristics of a transistor pulse generator in the process of electric spark dispersion of current-conductive granular media
von: Khrysto, O. I.
Veröffentlicht: (2025)

On the contact interaction of hard-alloy deforming broaches with the workpiece during the formation of grooves in the holes of tubular products
von: Ye. Sheikin, et al.
Veröffentlicht: (2021)

INVESTIGATION OF MECHANICAL STRESSES IN THE DRIVE SHAFT OF MV VACUUM CIRCUIT BREAKER
von: Baida, E. I., et al.
Veröffentlicht: (2017)

FORMING CAPABILITIES OF A PULSE MAGNETIC FIELD GENERATOR
von: Petkov, A. A.
Veröffentlicht: (2015)

Method for the Optimal Design of Vacuum-Evaporative Heat Pumps
von: Kuznetsov, Mikhail A., et al.
Veröffentlicht: (2019)

Method for the Optimal Design of Vacuum-Evaporative Heat Pumps
von: Kuznetsov, Mikhail A., et al.
Veröffentlicht: (2019)

ON THE APPLICABILITY OF THE PHASE SCANNING METHOD IN ANTENNA ARRAYS OF CHIRP PULSE RADARS
von: Galushko, V. G., et al.
Veröffentlicht: (2019)

INVESTIGATION OF A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH DIFFERENT INDUCTOR POWER SUPPLY CIRCUITS
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

INVESTIGATIONS OF THE DYNAMICS OF A BISTABLE ELECTROMAGNET WITH IMPROVED CHARACTERISTICS FOR MEDIUM VOLTAGE VACUUM CIRCUIT BREAKERS
von: Baida, E. I., et al.
Veröffentlicht: (2020)

Influence of the initial winding displacement on the indicators of the electromechanical induction accelerator of cylindrical configuration
von: Bolyukh, V. F., et al.
Veröffentlicht: (2021)

THE PROBLEM OF CORRECT CHOICE OF FERRITE BEADS
von: Gurevich, Vladimir I.
Veröffentlicht: (2016)

The possible degassing nature of some local structures of concentric and zonal structure on the territory of the Volyn-Podolye plate and the Western part of the Ukrainian Shield and the way of their subsequent study
von: Entin, V.A., et al.
Veröffentlicht: (2020)

THE SEVENTY YEARS’ HISTORY OF "YUZHCABLE" WORKS
von: Zolotaryov, V. M.
Veröffentlicht: (2013)

High pure substances for astrophysical research
von: Kovtun, G.P.
Veröffentlicht: (2020)

Application in a linear proton accelerator of a non-vaporizable Zr(86)-Al(14) getter located inside the chamber of a plasma-ion proton injector for its additional pumping
von: Aksonova, A.M., et al.
Veröffentlicht: (2022)

INFLUENCE OF ARMATURE PARAMETERS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER ON ITS EFFICIENCY
von: Bolyukh, V. F., et al.
Veröffentlicht: (2017)

The use of shape memory alloys in fuses for the protection of electrical installations
von: Kozyrskyi, V. V., et al.
Veröffentlicht: (2026)

Use of simulation for homogenization of temperature field in Al2O3 workpiece in the process of hot vacuum pressing
von: V. A. Dutka, et al.
Veröffentlicht: (2020)

INFLUENCE OF GEOMETRICAL PARAMETERS OF THE INDUCTOR AND ARMATURE ON THE INDICATORS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER OF AN ELECTRODYNAMIC TYPE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2019)

Determination of economically justified parameters of synchronous disconnection at low-voltage circuit switching via a synchronous vacuum contactor
von: Verkhola, A. V.
Veröffentlicht: (2014)

FINE STRUCTURE OF ANOMALOUSLY INTENSE PULSES OF PSR J0814+7429 RADIO EMISSION IN THE DECAMETER RANGE
von: Skoryk, A. O., et al.
Veröffentlicht: (2017)