Allowance for heat and vibration parameters variation of electric machines with extended failure interval
Peculiarities of heat and vibration parameters determination are substantiated for electric machines with extended failure interval under conditions of defects in the main structural units and elements. The necessity of their application to improving the existing research methods and reliability mod...
Saved in:
| Date: | 2014 |
|---|---|
| Main Authors: | Somka, O. O., Prus, V. V. |
| Format: | Article |
| Language: | Ukrainian |
| Published: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2014
|
| Subjects: | |
| Online Access: | http://eie.khpi.edu.ua/article/view/2074-272X.2014.2.12 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsSimilar Items
A COMPUTERIZED DIAGNOSTIC COMPLEX FOR RELIABILITY TESTING OF ELECTRIC MACHINES
by: Somka, O. O., et al.
Published: (2015)
by: Somka, O. O., et al.
Published: (2015)
POWER CHARACTERISTICS OF A VIBRATOR WITH A LINEAR NONSALIENT-POLE ARMATURE MOTOR DRIVE
by: Bondar, R. P.
Published: (2014)
by: Bondar, R. P.
Published: (2014)
Modeling of dynamic characteristics of a nonlinear oscillatory system with a magnetic spring. Part 1.
by: Bondar, R. P., et al.
Published: (2014)
by: Bondar, R. P., et al.
Published: (2014)
COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
by: Prakht, V. A., et al.
Published: (2020)
by: Prakht, V. A., et al.
Published: (2020)
IMPLEMENTING OF MICROSOFT AZURE MACHINE LEARNING TECHNOLOGY FOR ELECTRIC MACHINES OPTIMIZATION
by: Pliugin, V. E., et al.
Published: (2019)
by: Pliugin, V. E., et al.
Published: (2019)
PREMATURE FAILURE OF MEDIUM-POWER TWO-POLE INDUCTION MOTOR WINDINGS
by: Lushchik, V. D., et al.
Published: (2013)
by: Lushchik, V. D., et al.
Published: (2013)
MACHINE-TRANSFORMER UNITS FOR WIND TURBINES
by: Panchenko, V. I., et al.
Published: (2016)
by: Panchenko, V. I., et al.
Published: (2016)
Fault-tolerant control of a double star induction machine operating in active redundancy
by: Guizani, S., et al.
Published: (2025)
by: Guizani, S., et al.
Published: (2025)
PERFORMANCE ANALYSIS OF SIX-PHASE INDUCTION MACHINE-MULTILEVEL INVERTER WITH ARBITRARY DISPLACEMENT
by: Ben Slimene, Marwa
Published: (2020)
by: Ben Slimene, Marwa
Published: (2020)
Experimental analysis of forced nonlinear vibrations of beams with breathing cracks
by: Полищук, О. Ф., et al.
Published: (2017)
by: Полищук, О. Ф., et al.
Published: (2017)
Experimental analysis of forced nonlinear vibrations of beams with breathing cracks
by: Полищук, О. Ф., et al.
Published: (2017)
by: Полищук, О. Ф., et al.
Published: (2017)
Normal vibration modes in nonlinear system with pendulum absorber
by: Клименко, А. А., et al.
Published: (2014)
by: Клименко, А. А., et al.
Published: (2014)
Normal vibration modes in nonlinear system with pendulum absorber
by: Клименко, А. А., et al.
Published: (2014)
by: Клименко, А. А., et al.
Published: (2014)
FEATURES OF ELECTRIC MOTOR CHOICE FOR NUCLEAR POWER PLANT TECHNOLOGICAL OBJECTS
by: Pavlenko, T. P., et al.
Published: (2013)
by: Pavlenko, T. P., et al.
Published: (2013)
THE STABILITY MONITORING OF THE MANUFACTURING PROCESS OF ELECTRICAL INSULATING SYSTEMS OF TRACTION ELECTRIC MACHINES
by: Bezprozvannych, G. V., et al.
Published: (2017)
by: Bezprozvannych, G. V., et al.
Published: (2017)
REFINED MODELLING OF INDUCTION MACHINES OF RENEWABLE ENERGY SYSTEMS WITH CHANGES IN THE DEGREE OF LOAD
by: Popovych , O., et al.
Published: (2025)
by: Popovych , O., et al.
Published: (2025)
DIVERGENCE OF THERMAL FACTORS OF TRACTION MACHINE ARMATURE WINDINGS UNDER HEAT TEST VIA BACK-TO-BACK METHOD
by: Afanasov, A. M.
Published: (2012)
by: Afanasov, A. M.
Published: (2012)
Vibration Features of Titanium Alloy Blades with Erosive Damages
by: Vorobiov, Yu.S., et al.
Published: (2018)
by: Vorobiov, Yu.S., et al.
Published: (2018)
RESEARCH OF THE MAGNETOELECTRIC LINEAR OSCILLATORY MOTOR CHARACTERISTICS DURING OPERATION ON ELASTOVISCOUS LOADING
by: Bondar, R. P.
Published: (2019)
by: Bondar, R. P.
Published: (2019)
MODELING OF EQUIVALENT STIFFNESS OF A MAGNETIC SPRING OF VIBRATION EXCITER BASED ON COAXIAL-LINEAR MOTOR
by: Golenkov, G. M., et al.
Published: (2015)
by: Golenkov, G. M., et al.
Published: (2015)
MODERN SOLUTIONS FOR PROVIDING ASSESSMENT AND CONTROL OF SECURITY OF ELECTRICITY SUPPLY
by: Pryshchepa, Yaroslav, et al.
Published: (2024)
by: Pryshchepa, Yaroslav, et al.
Published: (2024)
The study of the gas compressor units profile blade changes influence on the nature of generated by them vibrations
by: Заміховський, Л. М., et al.
Published: (2013)
by: Заміховський, Л. М., et al.
Published: (2013)
The study of the gas compressor units profile blade changes influence on the nature of generated by them vibrations
by: Заміховський, Л. М., et al.
Published: (2013)
by: Заміховський, Л. М., et al.
Published: (2013)
Features of modeling of stress in vinicity of crack tip at vibrations of turbomashine blading
by: Чугай, А. М.
Published: (2014)
by: Чугай, А. М.
Published: (2014)
Features of modeling of stress in vinicity of crack tip at vibrations of turbomashine blading
by: Чугай, А. М.
Published: (2014)
by: Чугай, А. М.
Published: (2014)
REFINED SELECTION OF ALLOWABLE CROSS-SECTIONS OF ELECTRICAL CONDUCTORS AND CABLES IN THE POWER CIRCUITS OF INDUSTRIAL ELECTRICAL EQUIPMENT TAKING INTO ACCOUNT EMERGENCY OPERATING MODES
by: Baranov, M. I.
Published: (2019)
by: Baranov, M. I.
Published: (2019)
Determination of grinding conditions for renewal of a wheel cutting ability allowing for its variation during the machining process
by: P. G. Matjukha, et al.
Published: (2017)
by: P. G. Matjukha, et al.
Published: (2017)
ENSURING BALANCE RELIABILITY OF ELECTRIC POWER SYSTEMS WITH RENEWABLE ENERGY SOURCES
by: Kazanskiy, S., et al.
Published: (2019)
by: Kazanskiy, S., et al.
Published: (2019)
Optimal design of tubularbar structures subjected to corrosion
by: Фридман, М. М.
Published: (2016)
by: Фридман, М. М.
Published: (2016)
Optimal design of tubularbar structures subjected to corrosion
by: Фридман, М. М.
Published: (2016)
by: Фридман, М. М.
Published: (2016)
Modernization of domestic power machine-building – basic of power security of Ukraine
by: Мацевитый, Ю. М., et al.
Published: (2013)
by: Мацевитый, Ю. М., et al.
Published: (2013)
Modernization of domestic power machine-building – basic of power security of Ukraine
by: Мацевитый, Ю. М., et al.
Published: (2013)
by: Мацевитый, Ю. М., et al.
Published: (2013)
DIRECT FREQUENCY CONVERTER WITH ARTIFICIAL AND NATURAL COMMUTATION FOR BRUSHLESS ASYNCHRONIZED MACHINES
by: Galinovskiy, A. M., et al.
Published: (2015)
by: Galinovskiy, A. M., et al.
Published: (2015)
THE LAW OF ELECTROMAGNETIC FORCE
by: Kutkovetskyy, V. J.
Published: (2014)
by: Kutkovetskyy, V. J.
Published: (2014)
ANALYSIS OF METHODS AND ALGORITHMS FOR STUDYING THE REGIME RELIABILITY OF POWER SYSTEMS IN CONDITIONS OF CASCADE FAILURE PROGRESSION
by: Bardyk, Ye., et al.
Published: (2023)
by: Bardyk, Ye., et al.
Published: (2023)
Experimental analysis of prestressed pipelines vibrations
by: Айнабеков, А. И., et al.
Published: (2016)
by: Айнабеков, А. И., et al.
Published: (2016)
Experimental analysis of prestressed pipelines vibrations
by: Айнабеков, А. И., et al.
Published: (2016)
by: Айнабеков, А. И., et al.
Published: (2016)
Association smooth-pole dual open-end windings permanent magnet synchronous machine with cascaded 2-level inverters for improved performances
by: Nayli, A., et al.
Published: (2026)
by: Nayli, A., et al.
Published: (2026)
To the Theory of Transverse Vibrations of Plates with allowance for Shear Strains
by: A. I. Manevich, et al.
Published: (2014)
by: A. I. Manevich, et al.
Published: (2014)
System aspects of design guaranteased cloud calculations
by: Kosovets, N.A., et al.
Published: (2018)
by: Kosovets, N.A., et al.
Published: (2018)
Similar Items
-
A COMPUTERIZED DIAGNOSTIC COMPLEX FOR RELIABILITY TESTING OF ELECTRIC MACHINES
by: Somka, O. O., et al.
Published: (2015) -
POWER CHARACTERISTICS OF A VIBRATOR WITH A LINEAR NONSALIENT-POLE ARMATURE MOTOR DRIVE
by: Bondar, R. P.
Published: (2014) -
Modeling of dynamic characteristics of a nonlinear oscillatory system with a magnetic spring. Part 1.
by: Bondar, R. P., et al.
Published: (2014) -
COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
by: Prakht, V. A., et al.
Published: (2020) -
IMPLEMENTING OF MICROSOFT AZURE MACHINE LEARNING TECHNOLOGY FOR ELECTRIC MACHINES OPTIMIZATION
by: Pliugin, V. E., et al.
Published: (2019)