Analysis of the thermal state of the electromagnetic mill inductor with oil cooling in stationary operation modes
Introduction. An electromagnetic mill (EMM) for the technological processing of various substances, which is based on the stator of a three-phase induction motor, is being studied. The stator winding has an increased current density, so the mill is provided with a system of forced cooling with trans...
Збережено в:
Дата: | 2023 |
---|---|
Автори: | , , |
Формат: | Стаття |
Мова: | English Ukrainian |
Опубліковано: |
National Technical University "Kharkiv Polytechnic Institute" and State Institution “Institute of Technical Problems of Magnetism of the National Academy of Sciences of Ukraine”
2023
|
Теми: | |
Онлайн доступ: | http://eie.khpi.edu.ua/article/view/277577 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Назва журналу: | Electrical Engineering & Electromechanics |