Buchumschlag

Analysis of the thermal state of the electromagnetic mill inductor with oil cooling in stationary operation modes

Introduction. An electromagnetic mill (EMM) for the technological processing of various substances, which is based on the stator of a three-phase induction motor, is being studied. The stator winding has an increased current density, so the mill is provided with a system of forced cooling with trans...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2023
Hauptverfasser:	Milykh, V. I., Shaida, V. Р., Yurieva, O. Yu.
Format:	Artikel
Sprache:	Englisch Ukrainisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2023
Schlagworte:	electromagnetic mill forced cooling of the inductor with oil analysis of the thermal state of the mill method of equivalent thermal circuits analysis of hydraulic parameters
Online Zugang:	http://eie.khpi.edu.ua/article/view/277577
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

TECHNOLOGICAL PARAMETERS OF THE COOLING MODE OF POLYMER INSULATION OF POWER CABLES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2019)

STRUCTURAL-PARAMETRIC SYNTHESIS OF ROLLING MILLS MULTI-MOTOR ELECTRIC DRIVES
von: Kuznetsov, B. I., et al.
Veröffentlicht: (2020)

Едафо-кліматична характеристика біотопів Передкарпаття за участі ценопопуляцій видів роду Рolygonatum Мill.
von: Riznychuk, N. I., et al.
Veröffentlicht: (2021)

ВПЛИВ ФОРМИ СТРУМУ ІНДУКТОРІВ ТА МАГНІТНОГО ПОТОКУ ЕЛЕКТРОМАГНІТУ НА ЕЛЕКТРОМАГНІТНУ СИЛУ, ЩО ДІЄ НА РОЗПЛАВЛЕНИЙ МЕТАЛ В АКТИВНІЙ ЗОНІ МАГНІТОДИНАМІЧНОГО НАСОСУ
von: Щерба, А.А., et al.
Veröffentlicht: (2023)

ANALYSIS OF STABILITY OF NONLINEAR THERMAL PROCESSES IN ENVIRONMENTS WITH DIFFERENT SPATIAL STRUCTURES OF DISTURBANCE
von: Bondarenko, D., et al.
Veröffentlicht: (2023)

Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
von: Кобзарь, К. А., et al.
Veröffentlicht: (2015)

Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
von: Кобзарь, К. А., et al.
Veröffentlicht: (2015)

Thermal and Stress State of the Steam Turbine Control Valve Casing, with the Turbine Operation in the Stationary Modes
von: Koliadiuk, Andrii S., et al.
Veröffentlicht: (2019)

Thermal and Stress State of the Steam Turbine Control Valve Casing, with the Turbine Operation in the Stationary Modes
von: Koliadiuk, Andrii S., et al.
Veröffentlicht: (2019)

Thermal behavior of apatite-like compounds Pb₁₀(ХO₄)₆(OH)₂, where X = P, V
von: Smolyak Svitlana
Veröffentlicht: (2025)

Solution of the Structural Optimization Problem of a Multiagent Approach Based Cutter Design
von: Anosov, V. L., et al.
Veröffentlicht: (2019)

Solution of the Structural Optimization Problem of a Multiagent Approach Based Cutter Design
von: Anosov, V. L., et al.
Veröffentlicht: (2019)

Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
von: Овсянникова, Е. А.
Veröffentlicht: (2017)

Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
von: Овсянникова, Е. А.
Veröffentlicht: (2017)

AN ANALYSIS OF THE ELECTROMAGNETIC PROCESSES IN THE INDUCTOR SYSTEM – TOOL OF THE STRAIGHTENING OF CAR BODIES
von: Batygin, Yu. V., et al.
Veröffentlicht: (2015)

CONTROL CURRENT METHOD OF THE CONCENTRATION OF FERROMAGNETIC ELEMENTS IN THE WORKING CHAMBER OF THE TECHNOLOGICAL INDUCTOR OF MAGNETIC FIELD DURING ITS OPERATION
von: Milykh, V. I., et al.
Veröffentlicht: (2020)

USE OF GEOTHERMAL COOLING BY AIR CONDITIONING SYSTEMS AS A MEANS OF REDUCING THE LOAD ON POWER SUPPLY SYSTEMS IN THE WARM SEASON
von: Lysak , O.
Veröffentlicht: (2025)

TURBOGENERATOR ROTOR HEATING IN PRESENCE OF ROTOR WINDING DEFECTS AND EXCITATION CURRENT FORCING
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2020)

INVESTIGATION OF A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH DIFFERENT INDUCTOR POWER SUPPLY CIRCUITS
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

PECULIARITIES OF CALCULATING STATIONARY HEATING OF WINDINGS OPERATING IN COMPLEX FORCED CONTROL SYSTEMS
von: Baida, E. I., et al.
Veröffentlicht: (2019)

APPLIED METHODOLOGY OF COMPLEX APPLICATION OF FREE COOLING AND HEAT PUMP TECHNOLOGIES
von: Perepelytsia , I., et al.
Veröffentlicht: (2024)

К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up
von: Бахмутская, Ю. О., et al.
Veröffentlicht: (2017)

К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up
von: Бахмутская, Ю. О., et al.
Veröffentlicht: (2017)

DEVELOPMENT OF A MATHEMATICAL MODEL FOR A FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR ROTOR TEMPERATURE FIELD ON THE BASIS OF DIFFERENTIAL EQUATIONS OF HEAT CONDUCTION
von: Ostashevskiy, N. A., et al.
Veröffentlicht: (2013)

INVESTIGATION AND CALCULATION OF VALLEYS OF OUTGOING FROM SUBSTATION GROUNDING CONDUCTORS FOR SHORT-CIRCUIT IN SINGLE-PHASE SHORT OF ELECTRICAL GRID
von: Nizhevskyi, V. I., et al.
Veröffentlicht: (2015)

Experimental Strength Analysis of Variable Stiffness Waffel-Grid Cylindrical Compartments. Part 2. Analysis Results
von: Degtyarev, Maksim A., et al.
Veröffentlicht: (2019)

Experimental Strength Analysis of Variable Stiffness Waffel-Grid Cylindrical Compartments. Part 2. Analysis Results
von: Degtyarev, Maksim A., et al.
Veröffentlicht: (2019)

The effect of thermal ageing on electrical and mechanical properties of thermoplastic nanocomposite insulation of power high-voltage cables
von: El Sherkawy, E., et al.
Veröffentlicht: (2024)

APPLICATION OF AN ARTIFICIAL NEURAL NETWORK FOR PREDICTING THE THERMAL STATE OF AN AIR-SOIL HEAT EXCHANGER
von: Basok , B., et al.
Veröffentlicht: (2025)

A comparative analysis of the parameters of a rotating magnetic field inductor when using concentric and loop windings
von: Milykh, V. I., et al.
Veröffentlicht: (2021)

EXPERIMENTAL STUDY OF PROCESSES IN AN ATTRACTIVE-SCREEN INDUCTOR SYSTEM UNDER ADDITIONAL COIL INSERTION
von: Batygin, Yu. V., et al.
Veröffentlicht: (2014)

Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
von: Rudenko, Andrii A., et al.
Veröffentlicht: (2020)

Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
von: Rudenko, Andrii A., et al.
Veröffentlicht: (2020)

Problems of building an effective system for development processes on management of the aviation forces of Ukraine
von: Dodonov, A. G., et al.
Veröffentlicht: (2019)

CALCULATION OF THE EQUIVALENT ELECTRICAL PARAMETERS OF THE INDUCTOR OF INDUCTION CHANNEL FURNACE WITH DEFECTS IN ITS LINING
von: Podoltsev, A. D., et al.
Veröffentlicht: (2018)

Thermomechanical loads of powerful turbogenerator stator winding insulation in the presence of water cooling defects
von: Kuchynskyi, K. A., et al.
Veröffentlicht: (2023)

INVESTIGATION OF THERMAL PROCESSES IN A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER OF CYCLIC ACTION
von: Bolyukh, V. F., et al.
Veröffentlicht: (2017)

Features load capacity assessment of power transformers in the wind power plants
von: Kazanskiy, S., et al.
Veröffentlicht: (2017)

IMPACT OF A HYDRAULIC DAMPER ON TWO-POSITION POLARIZED ACTUATOR DYNAMICS
von: Baida, E. I.
Veröffentlicht: (2013)

COMPUTER MODELING ANALYSIS OF PHOTOVOLTAIC (PV) MODULES WITHOUT AND WITH INTEGRATED COOLING SYSTEMS
von: Axtamov , T. Z., et al.
Veröffentlicht: (2025)