Numerical-field analysis of active and reactive winding parameters and mechanical characteristics of a squirrel-cage induction motor
Introduction. The active and reactive (inductive) winding resistances of three-phase asynchronous motors (IM) are investigated. These important parameters are determined during design and are the basis for calculating a number of energy parameters and characteristics. Problem. In the classical desig...
Gespeichert in:
| Datum: | 2023 |
|---|---|
| 1. Verfasser: | Milykh, V. I. |
| Format: | Artikel |
| Sprache: | Englisch Ukrainisch |
| Veröffentlicht: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2023
|
| Schlagworte: | |
| Online Zugang: | http://eie.khpi.edu.ua/article/view/281060 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsÄhnliche Einträge
A METHOD FOR CALCULATING MECHANICAL CHARACTERISTICS OF INDUCTION MOTORS WITH SQUIRREL-CAGE ROTOR
von: Malyar, V. S., et al.
Veröffentlicht: (2019)
von: Malyar, V. S., et al.
Veröffentlicht: (2019)
Numerical-field analysis of differential leakage reactance of stator winding in three-phase induction motors
von: Milykh, V. I.
Veröffentlicht: (2025)
von: Milykh, V. I.
Veröffentlicht: (2025)
Mathematical modelling of starting modes of induction motors with squirrel-cage rotor
von: Malyar, V. S., et al.
Veröffentlicht: (2021)
von: Malyar, V. S., et al.
Veröffentlicht: (2021)
A mathematical model of an induction motor with the stator and rotor unsymmetry
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)
Theory and practice of numerical-field analysis and refinement of electromagnetic and energy parameters in the designs of three-phase induction motors
von: Milykh, V. I.
Veröffentlicht: (2026)
von: Milykh, V. I.
Veröffentlicht: (2026)
Improved speed sensorless control for induction motor drives using rotor flux angle estimation
von: Tran, C. D., et al.
Veröffentlicht: (2025)
von: Tran, C. D., et al.
Veröffentlicht: (2025)
The influence of the design of the stator winding of a synchronous-reactive generator on increasing its energy efficiency
von: Iegorov, O. B., et al.
Veröffentlicht: (2025)
von: Iegorov, O. B., et al.
Veröffentlicht: (2025)
Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
von: Malyar, V. S., et al.
Veröffentlicht: (2022)
von: Malyar, V. S., et al.
Veröffentlicht: (2022)
Automated system for calgulating corrective loads and predicting vibration during dynamic balancing of turbines
von: Trykush, N. P., et al.
Veröffentlicht: (2018)
von: Trykush, N. P., et al.
Veröffentlicht: (2018)
FEATURES OF EDDY CURRENT DISTRIBUTION IN A HOLLOW PERFORATED ROTOR OF A POLYFUNCTIONAL ELECTROMECHANICAL CONVERTER
von: Zablodskii, N. N., et al.
Veröffentlicht: (2013)
von: Zablodskii, N. N., et al.
Veröffentlicht: (2013)
NUMERICAL-FIELD ANALYSIS OF THE CHARACTERISTICS OF A THREE-PHASE MAGNETIC FIELD INDUCTOR FOR THE TREATMENT OF VARIOUS SUBSTANCES WITH CURRENT STABILIZATION
von: Milykh, V. I., et al.
Veröffentlicht: (2019)
von: Milykh, V. I., et al.
Veröffentlicht: (2019)
COMSOL MULTIPHYSICS BASED CALCULATION OF CONTACT PRESSURE IN MECHANICAL SYSTEMS
von: Baida, E. I.
Veröffentlicht: (2013)
von: Baida, E. I.
Veröffentlicht: (2013)
NUMERICAL FIELD ESTIMATION OF TURBOGENERATOR STATOR WINDING SHORTENING EFFICIENCY
von: Milykh, V. I., et al.
Veröffentlicht: (2014)
von: Milykh, V. I., et al.
Veröffentlicht: (2014)
A TURBO-GENERATOR DESIGN SYNTHESIS BASED ON THE NUMERICAL-FIELD CALCULATIONS AT VARYING THE NUMBER OF STATOR SLOTS
von: Milykh, V. I.
Veröffentlicht: (2016)
von: Milykh, V. I.
Veröffentlicht: (2016)
INVESTIGATION OF MECHANICAL STRESSES IN THE DRIVE SHAFT OF MV VACUUM CIRCUIT BREAKER
von: Baida, E. I., et al.
Veröffentlicht: (2017)
von: Baida, E. I., et al.
Veröffentlicht: (2017)
MECHANICAL CHARACTERISTICS OF THREE-PHASE INDUCTION MOTORS WITH SINGLE-PHASE POWER SUPPLY
von: Malyar, V. S., et al.
Veröffentlicht: (2016)
von: Malyar, V. S., et al.
Veröffentlicht: (2016)
RAPID NONDESTRUCTIVE MECHANICAL STRESS CONTROL
von: Bezotosniy, V. F., et al.
Veröffentlicht: (2013)
von: Bezotosniy, V. F., et al.
Veröffentlicht: (2013)
Internal capacitive compensation of the reactive power of the screw electromechanical converter
von: Zablodskiy, M. M., et al.
Veröffentlicht: (2024)
von: Zablodskiy, M. M., et al.
Veröffentlicht: (2024)
COMPARISON OF ADJUSTABLE HIGH-PHASE ORDER INDUCTION MOTORS’ MERITS
von: Petrushin, V. S., et al.
Veröffentlicht: (2016)
von: Petrushin, V. S., et al.
Veröffentlicht: (2016)
RESEARCH OF THE MODES OF FULL COMPENSATION OF REACTIVE POWER IN A THREE-PHASE POWER SUPPLY SYSTEM
von: Yagup, V. G., et al.
Veröffentlicht: (2019)
von: Yagup, V. G., et al.
Veröffentlicht: (2019)
ENERGY-EFFICIENT DOUBLE CAGE INDUCTION MOTOR DESIGN AND SIMULATION FOR RENEWABLE-POWERED ELECTRIC VEHICLES
von: Patel, Dhavalkumar Kantilal, et al.
Veröffentlicht: (2025)
von: Patel, Dhavalkumar Kantilal, et al.
Veröffentlicht: (2025)
ANALYSIS OF THE VARIABLE COMPONENT OF MAGNETIC FIELD ON THE ROTATING ROTOR SURFACE OF A TURBOGENERATOR.
von: Milykh, V. I., et al.
Veröffentlicht: (2013)
von: Milykh, V. I., et al.
Veröffentlicht: (2013)
DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)
Digital Program Control and Complex Component Processing in Performance-Driven Production Engineering
von: Petrova, Desislava, et al.
Veröffentlicht: (2025)
von: Petrova, Desislava, et al.
Veröffentlicht: (2025)
Model of pulsating current traction motor taking into consideration magnetic losses in steel
von: Goolak, S., et al.
Veröffentlicht: (2021)
von: Goolak, S., et al.
Veröffentlicht: (2021)
Influence of Thermal and Mechanical Factors on the Stressed State of Large Components of Hydrogenerator-Motors
von: Tretyak, Aleksey V., et al.
Veröffentlicht: (2018)
von: Tretyak, Aleksey V., et al.
Veröffentlicht: (2018)
Influence of Thermal and Mechanical Factors on the Stressed State of Large Components of Hydrogenerator-Motors
von: Tretyak, Aleksey V., et al.
Veröffentlicht: (2018)
von: Tretyak, Aleksey V., et al.
Veröffentlicht: (2018)
THE USE OF TELESCOPIC MECHANISMS AS A DIRECTION FOR THE DEVELOPMENT OF ENERGY-ACTIVE FENCING TECHNOLOGY
von: Svirsa , V., et al.
Veröffentlicht: (2021)
von: Svirsa , V., et al.
Veröffentlicht: (2021)
ANALYSIS OF ELECTROMAGNETIC VIBRATION FORCES IN THE ELEMENTS OF THE TURBOGENERATOR STATOR FASTENING TO THE CASE IN NON-NOMINAL OPERATION MODES
von: Shevchenko, V. V., et al.
Veröffentlicht: (2018)
von: Shevchenko, V. V., et al.
Veröffentlicht: (2018)
Results of experimental studies of a jet-reactive turbine: Effect of pressure on torque
von: Baha, Tetiana, et al.
Veröffentlicht: (2025)
von: Baha, Tetiana, et al.
Veröffentlicht: (2025)
HALF-DIFFERENTIAL CAPACITIVE AIR GAP SENSOR FOR HYDROGENERATORS
von: Levytskyi , A., et al.
Veröffentlicht: (2024)
von: Levytskyi , A., et al.
Veröffentlicht: (2024)
REACTIVE POWER COMPENSATION IN ASYNCHRONOUS ELECTRIC DRIVES.
von: Malyar, V. S., et al.
Veröffentlicht: (2013)
von: Malyar, V. S., et al.
Veröffentlicht: (2013)
Results of experimental studies of a jet-reactive turbine: Effect of pressure on rotation speed
von: Baha, Tetiana, et al.
Veröffentlicht: (2025)
von: Baha, Tetiana, et al.
Veröffentlicht: (2025)
Dynamic measurement of magnetic characteristics of switched reluctance motor
von: Fan, J., et al.
Veröffentlicht: (2023)
von: Fan, J., et al.
Veröffentlicht: (2023)
Wavelet packet analysis for rotor bar breakage in an inverter induction motor
von: Abu Ibaid, O. Z. I., et al.
Veröffentlicht: (2023)
von: Abu Ibaid, O. Z. I., et al.
Veröffentlicht: (2023)
МЕХАНІЧНІ ТА ВІБРОМЕХАНІЧНІ ХАРАКТЕРИСТИКИ НАТИСКНИХ ПАЛЬЦІВ І ПЛИТ ОСЕРДЯ СТАТОРА ТУРБОГЕНЕРАТОРА
von: Кучинський, К.А., et al.
Veröffentlicht: (2017)
von: Кучинський, К.А., et al.
Veröffentlicht: (2017)
APPLICATION OF A RELATIVE TECHNICAL LEVEL INDEX METHOD TO INDUCTION MOTOR OPTIMIZATION PROBLEMS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2014)
von: Stavinskii, A. A., et al.
Veröffentlicht: (2014)
Single-phase power shunt active filter design using photovoltaic as reactive power compensator
von: Dwinanto, B., et al.
Veröffentlicht: (2025)
von: Dwinanto, B., et al.
Veröffentlicht: (2025)
ORTHOGONAL COMPONENTS OF THE THREE-PHASE CURRENT AT ASYMMETRICAL ACTIVE - REACTIVE LOAD IN 4-WIRE CIRCUIT
von: Sirotin, Iu. A.
Veröffentlicht: (2016)
von: Sirotin, Iu. A.
Veröffentlicht: (2016)
Energy-efficient induction motors designing with application of a modified criterion of reduced costs
von: Petrushin, V. S.
Veröffentlicht: (2014)
von: Petrushin, V. S.
Veröffentlicht: (2014)
Ähnliche Einträge
-
A METHOD FOR CALCULATING MECHANICAL CHARACTERISTICS OF INDUCTION MOTORS WITH SQUIRREL-CAGE ROTOR
von: Malyar, V. S., et al.
Veröffentlicht: (2019) -
Numerical-field analysis of differential leakage reactance of stator winding in three-phase induction motors
von: Milykh, V. I.
Veröffentlicht: (2025) -
Mathematical modelling of starting modes of induction motors with squirrel-cage rotor
von: Malyar, V. S., et al.
Veröffentlicht: (2021) -
A mathematical model of an induction motor with the stator and rotor unsymmetry
von: Chaban, V. Y., et al.
Veröffentlicht: (2012) -
Theory and practice of numerical-field analysis and refinement of electromagnetic and energy parameters in the designs of three-phase induction motors
von: Milykh, V. I.
Veröffentlicht: (2026)