Cover Image

Nonlinear vector control of multiphase induction motor using linear quadratic regulator and active disturbances rejection control under disturbances and parameter variations

Introduction. This paper introduces a hybrid control strategy for multiphase induction motors, specifically focusing on the dual star induction motor (DSIM) by integrating active disturbances rejection control (ADRC) and linear quadratic regulator (LQR). Problem. Conventional PI-based indirect field...

Full description

Saved in:

Bibliographic Details
Date:	2025
Main Authors:	Rezgui, S. E., Darsouni, Z., Benalla, H.
Format:	Article
Language:	English
Published:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2025
Subjects:	optimal control active disturbances rejection control indirect field-oriented control multiphase induction motor three-level neutral point clamped inverters
Online Access:	http://eie.khpi.edu.ua/article/view/324738
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Similar Items

Ensuring service continuity in electric vehicles with vector control and linear quadratic regulator for dual star induction motors
by: Darsouni, Z., et al.
Published: (2025)

Solar shunt active power filter based on optimized direct power control strategy with disturbance rejection principle
by: Boudechiche, G., et al.
Published: (2024)

Optimization of fractional PI controller parameters for enhanced induction motor speed control via indirect field-oriented control
by: Alnaib, I. I., et al.
Published: (2025)

Intelligent fuzzy back-stepping observer design based induction motor robust nonlinear sensorless control
by: Abed, K., et al.
Published: (2024)

Smart current control of the wind energy conversion system based permanent magnet synchronous generator using predictive and hysteresis model
by: Zine, H. K. E., et al.
Published: (2024)

Fractional-based iterative learning-optimal model predictive control of speed induction motor regulation for electric vehicles application
by: Nemouchi, B., et al.
Published: (2024)

Adaptive finite-time synergetic control for flexible-joint robot manipulator with disturbance inputs
by: Nguyen, X. C., et al.
Published: (2025)

Indirect active and reactive powers control of doubly fed induction generator fed by three-level adaptive-network-based fuzzy inference system – pulse width modulation converter with a robust method based on super twisting algorithms
by: Benbouhenni, H., et al.
Published: (2021)

Fuzzy logic-based vector control of permanent magnet synchronous motor drives under inter-turn short-circuit fault conditions
by: Laamari, Y., et al.
Published: (2025)

SENSORLESS DIRECT POWER CONTROL FOR THREE-PHASE GRID SIDE CONVERTER INTEGRATED INTO WIND TURBINE SYSTEM UNDER DISTURBED GRID VOLTAGES
by: Boukhechem, I., et al.
Published: (2020)

STABILIZATION OF PARAMETERS OF ASYNCHRONOUS ELECTRIC DRIVE WITH VECTOR CONTROL
by: Khlopenko, N. J., et al.
Published: (2015)

Performance enhancement of direct torque control induction motor drive using space vector modulation strategy
by: Moussaoui, L.
Published: (2022)

Artificial neural network and discrete wavelet transform for inter-turn short circuit and broken rotor bars faults diagnosis under various operating conditions
by: Rouaibia, R., et al.
Published: (2024)

Fault-tolerant control of a double star induction machine operating in active redundancy
by: Guizani, S., et al.
Published: (2025)

Indirect field-oriented control of twin-screw electromechanical hydrolyzer
by: Zablodskiy, M. M., et al.
Published: (2022)

Model reference adaptive system speed estimator based on type-1 and type-2 fuzzy logic sensorless control of electrical vehicle with electrical differential
by: Khemis, A., et al.
Published: (2023)

NEURO-SYSTEM OF AIMING AND STABILIZING WITH A REGULATOR ON THE BASIS OF STANDARD MODEL MODEL REFERENCE CONTROLLER
by: Kuznetsov, B. I., et al.
Published: (2015)

Comparative study between sliding mode control and the vector control of a brushless doubly fed reluctance generator based on wind energy conversion systems
by: Oualah, O., et al.
Published: (2022)

Multiphase winding homologous series synthesis and harmonic analysis
by: Degtev, V. G., et al.
Published: (2014)

REACTIVE POWER CONTROL IN MICRO-GRID NETWORKS USING ADAPTIVE CONTROL
by: Moghayadniya, A., et al.
Published: (2019)

Improved speed sensorless control for induction motor drives using rotor flux angle estimation
by: Tran, C. D., et al.
Published: (2025)

Direct power control using space vector modulation strategy control for wind energy conversion system using three-phase matrix converter
by: Boukadoum, A., et al.
Published: (2023)

Performance evaluation and analysis by simulation for sliding mode control with speed regulation of permanent magnet synchronous motor drives in electric vehicles
by: Senani, F., et al.
Published: (2025)

Advanced control of twin rotor multi-input multi-output systems using seagull optimization for linear quadratic regulator tuning
by: Mostefaoui, H., et al.
Published: (2026)

Optimal performance assessment of intelligent controllers used in solar-powered electric vehicle
by: Kumar, R. S., et al.
Published: (2023)

High stability temperature control of the laser diode for interferometry
by: Kosyak, I. V.
Published: (2016)

OPTIMIZED PI CONTROL FOR POWER FLOW AND DC LINK VOLTAGE REGULATION IN A PV-WIND-BATTERY MICROGRID USING GREY WOLF OPTIMIZATION
by: Mogilicharla, Veera Narasimha Murthy, et al.
Published: (2025)

AMELIORATE DIRECT POWER CONTROL OF STANDALONE WIND ENERGY GENERATION SYSTEM BASED ON PERMANENT MAGNET SYNCHRONOUS GENERATOR BY USING FUZZY LOGIC CONTROL
by: Lebied, R., et al.
Published: (2020)

CALCULATION AND DESIGN OF A ROBUST SPEED CONTROLLER OF A FREQUENCY-CONTROLLED INDUCTION ELECTRIC DRIVE
by: Khlopenko, N. J.
Published: (2020)

OPTIMAL FREQUENCY CONTROL IN MICROGRID SYSTEM USING FRACTIONAL ORDER PID CONTROLLER USING KRILL HERD ALGORITHM
by: Regad, M., et al.
Published: (2020)

The method of multi objective synthesis of stochastic robust control by multimass electromechanical systems under non-gausian random external disturbances
by: Kuznetsov, B. I., et al.
Published: (2022)

Optimizing voltage control in AC microgrid systems with fuzzy logic strategies and performance assessment
by: Adiche, S., et al.
Published: (2025)

HEAT PUMP-BASED ENERGY CLUSTER CONTROL SYSTEM
by: Zurian, О., et al.
Published: (2023)

STATISTICAL OPTIMIZATION OF FREQUENCY REGULATED INDUCTION ELECTRIC DRIVES WITH SCALAR CONTROL
by: Shurub, Yu. V.
Published: (2017)

Research for an enhanced fault-tolerant solution against the current sensor fault types in induction motor drives
by: Tran, C. D., et al.
Published: (2024)

CAST-FILM POLYMER COMPOSITION DOSING SYSTEM DRIVE CONTROL
by: Kulinchenko, G. V., et al.
Published: (2014)

A robust control design approach for altitude control and trajectory tracking of a quadrotor
by: Gulshan, Z. A., et al.
Published: (2021)

ANALYSIS AND VERIFICATION OF THE OPERATION OF THE STABILIZING ROBUST CONTROLLER'S ELECTRICAL CIRCUIT OF THE ROTOR FLUX-LINKAGE CONTROL SYSTEM
by: Khlopenko, I. N., et al.
Published: (2020)

Voltage regulation using three phase electric spring by fuzzy logic controller
by: Ikhe, A., et al.
Published: (2023)

Cyclicity of Control Operations on an Arbitrary Modulus
by: Mаtоv, О. Ya., et al.
Published: (2013)