Buchumschlag

Electromechanical processes during the start of induction-type magnetic levitation

Purpose. A study of induction-type magnetic levitation by determining the electromechanical processes that occur when a stationary inductor is connected to an alternating voltage source and the levitation of an anchor made in the form of a multi-turn short-circuited winding with an attached load. Me...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2025
1. Verfasser:	Bolyukh, V. F.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2025
Schlagworte:	magnetic levitation of induction type mathematical model experimental test starting electromechanical characteristics oscillatory electromechanical process
Online Zugang:	http://eie.khpi.edu.ua/article/view/327348
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

Electromechanical and thermophysical processes in the pulse induction accelerator of plasma formation
von: Korytchenko, K. V., et al.
Veröffentlicht: (2023)

Influence of limiting the duration of the armature winding current on the operating indicators of a linear pulse electromechanical induction type converter
von: Bolyukh, V.F., et al.
Veröffentlicht: (2021)

EXPERIMENTAL STUDY OF FERROMAGNETIC CORE PARAMETERS INFLUENCE ON ELECTROMECHANICAL CHARACTERISTICS OF A LINEAR INDUCTION-DYNAMIC CONVERTER
von: Bolyukh, V. F., et al.
Veröffentlicht: (2014)

Features of excitation of a linear electromechanical converter of induction type from an AC source
von: Bolyukh, V.F., et al.
Veröffentlicht: (2021)

INVESTIGATION OF THERMAL PROCESSES IN A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER OF CYCLIC ACTION
von: Bolyukh, V. F., et al.
Veröffentlicht: (2017)

INVESTIGATION OF LINEAR PULSE ELECTROMECHANICAL CONVERTER OF INDUCTION TYPE WITH DOUBLE ARMATURE INTENDED FOR DESTROYING INFORMATION ON SSD STORAGE DEVICE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

ELECTROMECHANICAL PROCESSES IN A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH A MOVABLE INDUCTOR AND TWO ARMATURES
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
von: Malyar, V. S., et al.
Veröffentlicht: (2022)

A TECHNIQUE OF EXPERIMENTAL INVESTIGATIONS OF LINEAR IMPULSE ELECTROMECHANICAL CONVERTERS
von: Bolyukh, V. F., et al.
Veröffentlicht: (2017)

Mathematical modelling of starting modes of induction motors with squirrel-cage rotor
von: Malyar, V. S., et al.
Veröffentlicht: (2021)

Plasma acceleration in the atmosphere by pulsed inductive thruster
von: Korytchenko, K. V., et al.
Veröffentlicht: (2024)

AN OPTIMIZATION APPROACH TO THE CHOICE OF PARAMETERS OF LINEAR PULSE INDUCTION ELECTROMECHANICAL CONVERTER
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

Influence of the initial winding displacement on the indicators of the electromechanical induction accelerator of cylindrical configuration
von: Bolyukh, V. F., et al.
Veröffentlicht: (2021)

INFLUENCE OF GEOMETRICAL PARAMETERS OF THE INDUCTOR AND ARMATURE ON THE INDICATORS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER OF AN ELECTRODYNAMIC TYPE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2019)

INVESTIGATION OF A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH DIFFERENT INDUCTOR POWER SUPPLY CIRCUITS
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

GEOMETRIC AND ELECTROPHYSICAL PARAMETERS OF ARMATURE WINDING OF ELECTROMECHANICAL CONVERTER OF INERTIAL ENERGY STORAGE FOR SUBURBAN TRAINS
von: Omelianenko, H. V., et al.
Veröffentlicht: (2020)

ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
von: Petrushin, V. S., et al.
Veröffentlicht: (2012)

A COMPARATIVE ANALYSIS OF CONSTRUCTIVE SCHEMES OF LINEAR IMPACTOR ELECTROMECHANICAL CONVERTERS COMBINED TYPE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2015)

MAGNETIC FIELD IN A GAP OF ELECTROMECHANICAL DISINTEGRATORS
von: Lushchik, V. D.
Veröffentlicht: (2014)

Efficiency of multi-armature linear pulse electromechanical power and speed converters
von: Bolyukh, V. F., et al.
Veröffentlicht: (2024)

Mathematical modeling of electromechanical processes in a brushless DC motor
von: Tkachuk, V. I., et al.
Veröffentlicht: (2014)

INFLUENCE OF FERROMAGNETIC CORE PARAMETERS ON INDUCTION-TYPE DYNAMIC MOTOR EFFICIENCY
von: Bolyukh, V. F., et al.
Veröffentlicht: (2012)

The method of multi objective synthesis of nonlinear robust control by multimass electromechanical systems
von: Kuznetsov, B. I., et al.
Veröffentlicht: (2022)

Development and study of a microprocessor automatic control system for a mono-switch tie type with a linear inductive electric motor and a discrete speed controller
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2022)

IMPROVING OF ELECTROMECHANICAL STABILIZATION SYSTEMS ACCURACY
von: Kuznetsov, B. I., et al.
Veröffentlicht: (2019)

EFFICIENCY OF LINEAR PULSE ELECTROMECHANICAL CONVERTERS DESIGNED TO CREATE IMPACT LOADS AND HIGH SPEEDS
von: Bolyukh, V. F., et al.
Veröffentlicht: (2015)

A CHROMOSOMAL-GENETIC THEORY OF ELECTROMECHANICAL SYSTEMS BY THE EXAMPLE OF ELECTROMECHANICAL DISINTEGRATORS
von: Lushchik, V. D.
Veröffentlicht: (2012)

ELECTROMECHANICAL TRANSIENT PROCESSES DURING SUPPLY VOLTAGE CHANGING IN THE SYSTEM OF POLYMER INSULATION COVERING OF THE CURRENT-CARRYING CORE OF ULTRA HIGH VOLTAGE CABLES
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2018)

IMPROVING OF ELECTROMECHANICAL SERVO SYSTEMS ACCURACY
von: Kuznetsov, B. I., et al.
Veröffentlicht: (2018)

METHOD OF DETERMINING THE START TIME OF INDUCTION MOTORS IN THE CONTROL OF RESISTOR-THYRISTOR MODULES
von: Lobov, V. I., et al.
Veröffentlicht: (2015)

The method of multi objective synthesis of stochastic robust control by multimass electromechanical systems under non-gausian random external disturbances
von: Kuznetsov, B. I., et al.
Veröffentlicht: (2022)

INFLUENCE OF ARMATURE PARAMETERS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER ON ITS EFFICIENCY
von: Bolyukh, V. F., et al.
Veröffentlicht: (2017)

IMMITATION MODEL OF A HYDRO TURBINE FOR COMPREHENSIVE MODELING OF HYDROELECTRIC POWER PLANT ELECTROMECHANICAL SYSTEM
von: Popovych, O., et al.
Veröffentlicht: (2023)

Indirect field-oriented control of twin-screw electromechanical hydrolyzer
von: Zablodskiy, M. M., et al.
Veröffentlicht: (2022)

Internal capacitive compensation of the reactive power of the screw electromechanical converter
von: Zablodskiy, M. M., et al.
Veröffentlicht: (2024)

HIGH-PERFORMANCE ELECTROMECHANICAL AND ELECTROMAGNETIC PULSE DEVICES FOR DESTRUCTION OF INFORMATION ON DIGITAL DRIVES
von: Bolyukh, V. F., et al.
Veröffentlicht: (2015)

MULTIOBJECTIVE SYNTHESIS OF ROBUST CONTROL BY MULTIMASS ELECTROMECHANICAL SYSTEMS BASED ON PARETO-OPTIMAL SOLUTION
von: Nikitina, T. B.
Veröffentlicht: (2015)

Total harmonic distortion analysis of inverter fed induction motor drive using neuro fuzzy type-1 and neuro fuzzy type-2 controllers
von: Srinivas, G., et al.
Veröffentlicht: (2024)

ANALYSIS OF PROCESSES IN AN INDEPENDENT GENERATOR WITH A NONCONTACT CASCADE THREE-PHASE MODULATED EXCITER VIA A STAR-CONNECTED CIRCUIT WITH A COMMON MODULATOR PHASE CONNECTION UNDER OPERATION TO AN INDUCTION MOTORS SITE
von: Vasyliv, K. M.
Veröffentlicht: (2013)

Mathematical modelling of transients in the electric drive of the turnout of the mono-sleeper type with switched-inductor motor
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2021)