Performance improvement of parallel dual-star permanent magnet synchronous machines via type-2 fuzzy direct torque control with a single six-phase inverter

Introduction. The growing need for efficient and high-performance electric drive systems has led to increased research in advanced control strategies for multi-machine configurations. Among them, dual-star permanent magnet synchronous machines (DSPMSMs) connected in parallel to a single inverter off...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2026
Hauptverfasser:	Bounab, A., Chaiba, A., Belkacem, S., Chariete, A.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2026
Schlagworte:	permanent magnet synchronous machine type-2 fuzzy logic controller direct torque control six-phase inverter multi-machines system
Online Zugang:	http://eie.khpi.edu.ua/article/view/332661
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

Direct torque control based on second order sliding mode controller for three-level inverter-fed permanent magnet synchronous motor: comparative study
von: Guezi, A., et al.
Veröffentlicht: (2022)

PERFORMANCE ANALYSIS OF SIX-PHASE INDUCTION MACHINE-MULTILEVEL INVERTER WITH ARBITRARY DISPLACEMENT
von: Ben Slimene, Marwa
Veröffentlicht: (2020)

Inverter fuzzy speed control of multi-machine system series-connected fed by a single five-phase an asymmetrical 19-level inverter with less number of switches
von: Bessaad, T., et al.
Veröffentlicht: (2025)

Association smooth-pole dual open-end windings permanent magnet synchronous machine with cascaded 2-level inverters for improved performances
von: Nayli, A., et al.
Veröffentlicht: (2026)

Improve of the direct torque control strategy applied to a multi-phase interior permanent magnet synchronous motor using a super twisting sliding mode algorithm
von: Mehedi, F., et al.
Veröffentlicht: (2025)

Electric drive vehicle based on sliding mode control technique using a 21-level asymmetrical inverter under different operating conditions
von: Djafer, L., et al.
Veröffentlicht: (2025)

Performance enhancement of direct torque control induction motor drive using space vector modulation strategy
von: Moussaoui, L.
Veröffentlicht: (2022)

Fuzzy logic-based vector control of permanent magnet synchronous motor drives under inter-turn short-circuit fault conditions
von: Laamari, Y., et al.
Veröffentlicht: (2025)

A new stator flow-oriented control method based on type-2 fuzzy logic controllers for permanent magnet synchronous motors
von: Tabbakh, M., et al.
Veröffentlicht: (2026)

Smart current control of the wind energy conversion system based permanent magnet synchronous generator using predictive and hysteresis model
von: Zine, H. K. E., et al.
Veröffentlicht: (2024)

COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
von: Prakht, V. A., et al.
Veröffentlicht: (2020)

Optimization of cogging torque in interior permanent magnet synchronous motor using optimum magnet v-angle
von: Patel, A. N., et al.
Veröffentlicht: (2023)

Performance evaluation and analysis by simulation for sliding mode control with speed regulation of permanent magnet synchronous motor drives in electric vehicles
von: Senani, F., et al.
Veröffentlicht: (2025)

COMPARISON OF PARAMETERS OF ASYNCHRONOUS AND SYNCHRONOUS ELECTRIC GENERATORS WITH PERMANENT MAGNETS EXCITATION FOR WIND TURBINES
von: Permynov, Y., et al.
Veröffentlicht: (2021)

Fault tolerant control of a permanent magnet synchronous machine using multiple constraints Takagi-Sugeno approach
von: Moussaoui, L., et al.
Veröffentlicht: (2022)

Influence of permanent magnet parameters on the performances of claw pole machines used in hybrid vehicles
von: Kimouche, A., et al.
Veröffentlicht: (2024)

New application of artificial neural network-based direct power control for permanent magnet synchronous generator
von: Akkouchi, K., et al.
Veröffentlicht: (2021)

OPERATION OF PERMANENT MAGNET SYNCHRONOUS GENERATOR APPLIED TO THE GRID CONNECTED WIND TURBINES
von: Permynov, Yu., et al.
Veröffentlicht: (2022)

Reduction of cogging torque of radial flux permanent magnet brushless DC motor by magnet shifting technique
von: Panchal, T. H., et al.
Veröffentlicht: (2022)

AMELIORATE DIRECT POWER CONTROL OF STANDALONE WIND ENERGY GENERATION SYSTEM BASED ON PERMANENT MAGNET SYNCHRONOUS GENERATOR BY USING FUZZY LOGIC CONTROL
von: Lebied, R., et al.
Veröffentlicht: (2020)

Fault-tolerant control of a double star induction machine operating in active redundancy
von: Guizani, S., et al.
Veröffentlicht: (2025)

Field programmable gate array hardware in the loop validation of fuzzy direct torque control for induction machine drive
von: Aib, A., et al.
Veröffentlicht: (2023)

OPERATION OF THE SYNCHRONOUS GENERATOR WITH PERMANENT MAGNETS DURING THE MAGNETIZATION OF A SIDE CAPACITY
von: Kovalenko, I
Veröffentlicht: (2021)

Estimation of the main dimensions of the traction permanent magnet-assisted synchronous reluctance motor
von: Liubarskyi, B. G., et al.
Veröffentlicht: (2021)

PERMANENT MAGNETS: IT’S APPLICATION IN ELECTROTECHNICAL INDUSTRY AND WASTE TREATMENT FROM MINING AND OTHER ENTERPRISES
von: Permynov, Y., et al.
Veröffentlicht: (2018)

Frequency analysis of stator currents of an induction motor controlled by direct torque control associated with a fuzzy flux estimator
von: Mabrouk, Y. A., et al.
Veröffentlicht: (2023)

A robust hybrid control strategy for enhancing torque stability and performance in PMSM drives
von: Nhi, V. T. K., et al.
Veröffentlicht: (2025)

DESIGN COMPARISON OF SYNCHRONOUS PERMANENT MAGNET GENERATOR FOR WIND TURBINES
von: Permynov, Y., et al.
Veröffentlicht: (2019)

Implementation of a new flux rotor based on model reference adaptive system for sensorless direct torque control modified for induction motor
von: Saifi, R.
Veröffentlicht: (2023)

Normal and degraded operation of the open-end winding induction machine fed by 2-level inverters in cascading
von: Nayli, A., et al.
Veröffentlicht: (2026)

STUDY OF THE METHOD AND ADJUSTMENT RANGE OF A MAGNETO-ELECTRIC SYNCHRONOUS GENERATOR WITH A VARIABLE CONDUCTANCE MAGNETIC SHUNT
von: Chumak, V., et al.
Veröffentlicht: (2023)

Comparative performance analysis of backstepping and sliding mode control for static synchronous compensators based on flying capacitor multicell converters
von: Belakehal, S., et al.
Veröffentlicht: (2026)

Control of an autonomous wind energy conversion system based on doubly fed induction generator supplying a non-linear load
von: L’Hadj Said, M., et al.
Veröffentlicht: (2025)

MODELING OF TRACTION SYNCHRONOUS PERMANENT MAGNET MOTOR MODES
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)

Mitigation of cogging torque in surface permanent magnet brushless DC motor using slot opening shift
von: Patel, A. N., et al.
Veröffentlicht: (2026)

A robust control design approach for altitude control and trajectory tracking of a quadrotor
von: Gulshan, Z. A., et al.
Veröffentlicht: (2021)

DESIGN PERMANENT MAGNET WINDGENERATOR OF INCREASED POWER (600÷3600) KW
von: Permynov, Y., et al.
Veröffentlicht: (2020)

Adaptive deep reinforcement learning-based control strategy for high-performance permanent magnet synchronous motor drive systems
von: Dukkipati, S., et al.
Veröffentlicht: (2026)

Algorithm for calculating synchronous end design generators with located at stator ends two magnetic systems for wind turbines
von: Permynov, Y., et al.
Veröffentlicht: (2016)

Optimizing voltage control in AC microgrid systems with fuzzy logic strategies and performance assessment
von: Adiche, S., et al.
Veröffentlicht: (2025)