Fault-tolerant control of a double star induction machine operating in active redundancy

Introduction. The operating safety of a variable-speed drive is of paramount importance in industrial sectors, such as electric propulsion for ships, rail transport, electric cars, and aircraft, where reliability, maintainability, and safety are top priorities. Problem. One solution to improve the a...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2025
Hauptverfasser:	Guizani, S., Nayli, A., Ben Ammar, F.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2025
Schlagworte:	double star induction machine active redundancy field-oriented control reliability
Online Zugang:	http://eie.khpi.edu.ua/article/view/335230
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

Association smooth-pole dual open-end windings permanent magnet synchronous machine with cascaded 2-level inverters for improved performances
von: Nayli, A., et al.
Veröffentlicht: (2026)

On n-stars in colorings and orientations of graphs
von: Protasov, Igor Vladimirovich
Veröffentlicht: (2016)

Model reference adaptive backstepping control of double star induction machine with extended Kalman sensorless control
von: Chaabane, H., et al.
Veröffentlicht: (2022)

Ensuring service continuity in electric vehicles with vector control and linear quadratic regulator for dual star induction motors
von: Darsouni, Z., et al.
Veröffentlicht: (2025)

Research for an enhanced fault-tolerant solution against the current sensor fault types in induction motor drives
von: Tran, C. D., et al.
Veröffentlicht: (2024)

A COMPUTERIZED DIAGNOSTIC COMPLEX FOR RELIABILITY TESTING OF ELECTRIC MACHINES
von: Somka, O. O., et al.
Veröffentlicht: (2015)

Allowance for heat and vibration parameters variation of electric machines with extended failure interval
von: Somka, O. O., et al.
Veröffentlicht: (2014)

PERFORMANCE ANALYSIS OF SIX-PHASE INDUCTION MACHINE-MULTILEVEL INVERTER WITH ARBITRARY DISPLACEMENT
von: Ben Slimene, Marwa
Veröffentlicht: (2020)

Fault tolerant control of a permanent magnet synchronous machine using multiple constraints Takagi-Sugeno approach
von: Moussaoui, L., et al.
Veröffentlicht: (2022)

Protecting the Integrity of Information in the Application Code «Weighted Groups»
von: Mаtоv, О. Ya., et al.
Veröffentlicht: (2013)

CONNECTION OF ADDITIONAL PULSAR EMISSION COMPONENTS IN THE CRAB WITH THE RESONANCE REFLECTION FROM A NEUTRON STAR
von: Kontorovich, V. M., et al.
Veröffentlicht: (2018)

Robust fault-tolerant sliding mode control and advanced fault diagnosis for doubly-fed induction generators
von: Hamdi, N., et al.
Veröffentlicht: (2025)

USING OF OBJECT-ORIENTED DESIGN PRINCIPLES IN ELECTRIC MACHINES DEVELOPMENT
von: Zablodskii, N. N., et al.
Veröffentlicht: (2016)

Double layer back propagation neural network based on restricted Boltzmann machines for forecasting daily particulate matter 2.5
von: Fu, Minglei, et al.
Veröffentlicht: (2017)

Performance improvement of parallel dual-star permanent magnet synchronous machines via type-2 fuzzy direct torque control with a single six-phase inverter
von: Bounab, A., et al.
Veröffentlicht: (2026)

REFINED MODELLING OF INDUCTION MACHINES OF RENEWABLE ENERGY SYSTEMS WITH CHANGES IN THE DEGREE OF LOAD
von: Popovych , O., et al.
Veröffentlicht: (2025)

COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
von: Prakht, V. A., et al.
Veröffentlicht: (2020)

ENERGY-EFFICIENT DOUBLE CAGE INDUCTION MOTOR DESIGN AND SIMULATION FOR RENEWABLE-POWERED ELECTRIC VEHICLES
von: Patel, Dhavalkumar Kantilal, et al.
Veröffentlicht: (2025)

IMPLEMENTING OF MICROSOFT AZURE MACHINE LEARNING TECHNOLOGY FOR ELECTRIC MACHINES OPTIMIZATION
von: Pliugin, V. E., et al.
Veröffentlicht: (2019)

REGIONS OF EXISTENCE OF THE CLASS II METHANOL MASERS. STATISTICAL FEATURES OF EMISSION IN CS (J = 2 - 1) LINE
von: Patoka, O. M., et al.
Veröffentlicht: (2017)

INVESTIGATION OF LINEAR PULSE ELECTROMECHANICAL CONVERTER OF INDUCTION TYPE WITH DOUBLE ARMATURE INTENDED FOR DESTROYING INFORMATION ON SSD STORAGE DEVICE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

Efficiency of a double-pulsed bridge noncontrolled rectifier with a capacitance filter
von: Zhemerov, George G., et al.
Veröffentlicht: (2012)

DOUBLE STATOR AXIAL FLUX MAGNETOELECTRIC GENERATOR FOR CONVERSION OF LOW POTENTIAL MECHANICAL ENERGY
von: Kovalenko , M., et al.
Veröffentlicht: (2024)

Study of relations between the generalized quaternions and procedure of doubling of hypercomplex numerical systems
von: Kalinovsky, Ya. O., et al.
Veröffentlicht: (2015)

Fuzzy current analysis-based fault diagnostic of induction motor using hardware co-simulation with field programmable gate array
von: Aib, A., et al.
Veröffentlicht: (2023)

Double-toroidal and \(1\)-planar non-commuting graph of a group
von: Pezzott, J. C. M.
Veröffentlicht: (2023)

MACHINE-TRANSFORMER UNITS FOR WIND TURBINES
von: Panchenko, V. I., et al.
Veröffentlicht: (2016)

IMPROVING CALCULATION ACCURACY OF CURRENTS IN CABLE SHIELDS AT DOUBLE-SIDED GROUNDING OF THREE-PHASE CABLE LINE
von: Grinchenko, V. S., et al.
Veröffentlicht: (2017)

SEARCH FOR A COMPACT SCINTILLATING COMPONENT IN SNR 3С58 AT DECAMETER WAVELENGTHS
von: Kalinichenko, N. N.
Veröffentlicht: (2014)

Solution of the Structural Optimization Problem of a Multiagent Approach Based Cutter Design
von: Anosov, V. L., et al.
Veröffentlicht: (2019)

Solution of the Structural Optimization Problem of a Multiagent Approach Based Cutter Design
von: Anosov, V. L., et al.
Veröffentlicht: (2019)

Development of methods for adapting the parameters of spatial end winding sections in 2D circuit-field models of induction-synchronous electric machines
von: Kotsur, M. I.
Veröffentlicht: (2024)

PREMATURE FAILURE OF MEDIUM-POWER TWO-POLE INDUCTION MOTOR WINDINGS
von: Lushchik, V. D., et al.
Veröffentlicht: (2013)

The growth function of the adding machine
von: Skochko, Volodymyr
Veröffentlicht: (2018)

Model reference adaptive system speed estimator based on type-1 and type-2 fuzzy logic sensorless control of electrical vehicle with electrical differential
von: Khemis, A., et al.
Veröffentlicht: (2023)

Maximum power point tracking improvement using type-2 fuzzy controller for wind system based on the double fed induction generator
von: Kaddache, M., et al.
Veröffentlicht: (2024)

Mathematical modeling in problem of searching optimal control of alloys obtaining for machine parts under uncertainty conditions
von: Demin, Dmitriy
Veröffentlicht: (2014)

Mathematical modeling in problem of searching optimal control of alloys obtaining for machine parts under uncertainty conditions
von: Demin, Dmitriy
Veröffentlicht: (2014)

Class structure of electromechanical energy converter models with UML-diagrams application
von: Pliugin, V. E.
Veröffentlicht: (2014)

AN OBJECT-ORIENTED FIELD MODEL OF ELECTROMECHANICAL TRANSFORMERS OF ENERGY
von: Pliugin, V. E.
Veröffentlicht: (2015)