Buchumschlag

OBJECTIVE FUNCTIONS OF THE COMPARATIVE ANALYSIS OF THE ENERGY EFFICIENCY OF ELECTROMAGNETIC SYSTEMS OF INDUCTION MOTORS WITH INNER AND OUTER ROTORS

The analytical expressions of determining the optimum geometric dimensions by criteria of the basic losses minimum of the structural variants of the electromagnetic system of the induction squirrel-cage motor with inner and outer rotors based on the method of the relative indications of the technica...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2015
Hauptverfasser:	Stavinskii, A. A., Palchykov, O. O.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2015
Schlagworte:	losses indication optimum geometric dimensions inner and outer rotors 621.313.333
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2015.1.08
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

APPLICATION OF A RELATIVE TECHNICAL LEVEL INDEX METHOD TO INDUCTION MOTOR OPTIMIZATION PROBLEMS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2014)

COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

COMPARATIVE ANALYSIS OF WEIGHT AND COST INDICATIONS OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)

THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)

Optimization of loading modes of a controlled asynchronous electric drive
von: Kanov, L. N.
Veröffentlicht: (2013)

STRATIGRAPHY BY FORAMINIFERS OF THE PALAEOCENE-EOCENE DEPOSITS OF THE INNER FLYSCH NAPPES OF THE OUTER UKRAINIAN CARPATHIANS
von: Hnylko, S.R.
Veröffentlicht: (2015)

DEVELOPMENT OF A MATHEMATICAL MODEL FOR A FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR ROTOR TEMPERATURE FIELD ON THE BASIS OF DIFFERENTIAL EQUATIONS OF HEAT CONDUCTION
von: Ostashevskiy, N. A., et al.
Veröffentlicht: (2013)

RESEARCH OF DYNAMIC CHARACTERISTICS OF INDUCTION MOTORS IN ELECTRIC DRIVES WITH MATCHING TRANSFORMER AND REDUCER
von: Petrushin, V. S., et al.
Veröffentlicht: (2019)

ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
von: Petrushin, V. S., et al.
Veröffentlicht: (2012)

A MATHEMATICAL MODEL OF THERMAL POWER PLANTS SMOKE EXHAUSTERS INDUCTION MOTORS SYSTEM OPERATION MODES
von: Vasyliv, K. M.
Veröffentlicht: (2017)

Energy-efficient induction motors designing with application of a modified criterion of reduced costs
von: Petrushin, V. S.
Veröffentlicht: (2014)

REACTIVE CURRENT OF AN INDUCTION ELECTRIC DRIVES WITH THYRISTOR VOLTAGE REGULATOR
von: Kovalova, J. V.
Veröffentlicht: (2014)

ANALYSIS OF ELECTRICITY CONSUMPTION OF INDUCTION MOTORS OF IE1 AND IE2 EFFICIENCY CLASSES IN A 11 kW PUMP INSTALLATION
von: Oshurbekov, S. Kh., et al.
Veröffentlicht: (2020)

MOTORSOLVE SOFTWARE PACKAGE: VERIFICATION OF PARAMETERS AND CHARACTERISTICS OF THE BRUSHLESS PERMANENT MAGNET MOTOR
von: Rymsha, V. V., et al.
Veröffentlicht: (2019)

METHOD OF DETERMINING THE START TIME OF INDUCTION MOTORS IN THE CONTROL OF RESISTOR-THYRISTOR MODULES
von: Lobov, V. I., et al.
Veröffentlicht: (2015)

COMPARISON OF ADJUSTABLE HIGH-PHASE ORDER INDUCTION MOTORS’ MERITS
von: Petrushin, V. S., et al.
Veröffentlicht: (2016)

A mathematical model of an induction motor with the stator and rotor unsymmetry
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)

STABILIZATION OF PARAMETERS OF ASYNCHRONOUS ELECTRIC DRIVE WITH VECTOR CONTROL
von: Khlopenko, N. J., et al.
Veröffentlicht: (2015)

REVERSIBLE THYRISTOR CONVERTERS OF BRUSHLESS SYNCHRONOUS COMPENSATERS
von: Galinovskiy, A. M., et al.
Veröffentlicht: (2013)

Wavelet packet analysis for rotor bar breakage in an inverter induction motor
von: Abu Ibaid, O. Z. I., et al.
Veröffentlicht: (2023)

Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
von: Malyar, V. S., et al.
Veröffentlicht: (2022)

A COMPARATIVE ANALYSIS OF PROCESSES IN AN INDEPENDENT GENERATOR WITH A NONCONTACT CASCADE THREE-PHASE MODULATED EXCITER VIA A STAR-CONNECTED CIRCUIT UNDER ACTIVE-INDUCTIVE LOADING
von: Vasyliv, K. M.
Veröffentlicht: (2013)

REGULARITIES OF ELECTROMAGNETIC PROCESSES OF A CONTACTLESS EXCITATION SYSTEM OF AN ASYNCHRONIZED GENERATOR BASED ON A CASCADE THREE-PHASE-THREE-PHASE VOLTAGE MODULATOR IN A SINGLE-STAR CIRCUIT
von: Vasyliv, K. M.
Veröffentlicht: (2018)

A METHOD FOR CALCULATING MECHANICAL CHARACTERISTICS OF INDUCTION MOTORS WITH SQUIRREL-CAGE ROTOR
von: Malyar, V. S., et al.
Veröffentlicht: (2019)

Inner automorphisms of Lie algebras related with generic \(2\times 2\) matrices
von: Drensky, Vesselin, et al.
Veröffentlicht: (2018)

INTENSITY SETTER FOR A DEVICE OF SMOOTH START OF SUBMERSIBLE PUMP ELECTRIC MOTOR
von: Lobov, V. I., et al.
Veröffentlicht: (2016)

ANALYSIS OF PROCESSES IN AN INDEPENDENT GENERATOR WITH A NONCONTACT CASCADE THREE-PHASE MODULATED EXCITER VIA A STAR-CONNECTED CIRCUIT WITH A COMMON MODULATOR PHASE CONNECTION UNDER OPERATION TO AN INDUCTION MOTORS SITE
von: Vasyliv, K. M.
Veröffentlicht: (2013)

RESEARCH INTO VALVE-ENGINE TRANSDUCERS OF BRUSHLESS SYNCHRONOUS AND ASYNCHRONIZED MACHINES IN A CIRCUIT SIMULATION SYSTEM.
von: Galinovskiy, A. M.
Veröffentlicht: (2013)

RESEARCH OF DYNAMIC PARAMETERS OF THE ELECTRIC DRIVE ON THE BASIS OF ROLLING ROTOR MOTOR
von: Kulinchenko, G. V., et al.
Veröffentlicht: (2016)

DETERMINING THE INTENSITY OF A POINT-LIKE SOURCE OBSERVED ON THE BACKGROUND OF AN EXTENDED SOURCE
von: Kornienko, Y. V., et al.
Veröffentlicht: (2015)

A comparative analysis of the parameters of a rotating magnetic field inductor when using concentric and loop windings
von: Milykh, V. I., et al.
Veröffentlicht: (2021)

Solar flat plate collector enhanced by two reflectors: optimum tilts of reflectors
von: Rachedi, M. Y., et al.
Veröffentlicht: (2022)

THE INFLUENCE OF AERODYNAMIC CHARACTERISTICS OF A BLADE PROFILE ON THE ENERGY CHARACTERISTICS OF A WINDOW ROTOR
von: Holovko, V., et al.
Veröffentlicht: (2019)

Additional power loss in a frequency-controlled induction motor due to voltage higher harmonics
von: Petrenko, A. N., et al.
Veröffentlicht: (2012)

Finite-time robust position tracking control for DC motors under uncertain dynamics
von: Nguyen, Q. B., et al.
Veröffentlicht: (2026)

Characteristics structures of the mélange zones in the Ukrainian Carpathians
von: Hnylko, O., et al.
Veröffentlicht: (2023)

DESIGN RANGE CRITERIA IN DESIGNING OF CONTROLLED ASYNCHRONOUS MOTORS
von: Petrushin, V. S., et al.
Veröffentlicht: (2014)

Methodology to Solve Optimal Placement Problems for 3D Objects
von: Chuhai, Andrii M., et al.
Veröffentlicht: (2025)

Methodology to Solve Optimal Placement Problems for 3D Objects
von: Chuhai, Andrii M., et al.
Veröffentlicht: (2025)